Yamaha CD-R/RW Drive CRW6416SX Owner's Manual - page 18
Manual is about: Yamaha CD-R/RW Drive Owner's Manual
of
42
2
Termination
Terminators prevent SCSI signals from being reflected off the last device in the
chain. The SCSI terminator switch should be set to “ON” if your CRW6416SX
drive is the last device on the SCSI chain. If it is not the last device on the
chain, the TERMINATOR switch should be set to “OFF.”
n
By factory default, the Terminator switch is set to “ON.”
Computer
Hard disk drive
(unterminated)
CRW6416SX
Terminator ON
SCSI adapter card
11
Installation
CRWSX_e.qx 7/8/99 3:08 PM Page 18