Yamaha CD Recordable/Rewritable Drive CRW2200 Owner's Manual - page 31
Manual is about: CRW2200e Series CD Recordable/Rewritable Drive
of
51
Setup Procedures
23
10
10
10
10 Connect a 4-pin power cable to the power supply connector of the
CRW2200E drive marked “DC INPUT.”
Notes
• There may be more than one 4-pin power cable available. Any one may be used.
• These connectors are D-shaped, so you can only connect the power cables in the correct
orientation. Do not apply excessive force when making this connection.
11
11
11
11 Tighten the four fastening screws on the side of the unit securely using a
screwdriver.
4-pin power cable
Bottom
Top
DC INPUT
connector