1. DL manuals
  2. Yamaha
  3. CD Player
  4. CDC 697 - CD Changer
  5. Manual

Yamaha CDC 697 - CD Changer Manual

Summary of CDC 697 - CD Changer

  • Page 1

    Yamaha electronics corporation, usa 6660 orangethorpe ave., buena park, calif. 90620, u.S.A. Yamaha canada music ltd. 135 milner ave., scarborough, ontario m1s 3r1, canada yamaha electronik europa g.M.B.H. Siemensstr. 22-34, 25462 rellingen bei hamburg, germany yamaha electronique france s.A. Rue am...

  • Page 2

    Uab cdc-697 compact disc automatic changer owner’s manual.

  • Page 3

    Ii en i en • explanation of graphical symbols the lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric sho...

  • Page 4

    Iii en english ii en fcc information (for us customers only) 1. Important notice: do not modify this unit! This product, when installed as indicated in the instructions contained in this manual, meets fcc requirements. Modifications not expressly approved by yamaha may void your authority, granted b...

  • Page 5

    Iv en getting started caution: read this before operating your unit. 20 voltage selector (asia and general models only) the voltage selector on the rear panel of this unit must be set for your local main voltage before plugging into the ac wall outlet. Voltages are 110/120/220/230–240 v ac, 50/60 hz...

  • Page 6

    English getting st arted pla ying cds functions for recording additional informa tion 1 en english features ● 5-discs carousel auto-changer ● full opening disc tray for changing 5 discs at a time ● playxchange; disc changing capability while playing back another ● repeat, random and program play ● r...

  • Page 7

    2 en • this compact disc player is designed only for playing back compact discs bearing the marks shown below. Never attempt to load any other type of disc into the unit. The unit can also play back 8 cm (3 inch) compact discs. Notes • this unit may not be able to play back some cd-r/cd-rw discs or ...

  • Page 8

    3 en getting st arted english ■ battery installation ■ battery replacement if you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes • use only aa, r6, um-3 batteries for replacement. • be sure the polari...

  • Page 9

    4 en connecting an amplifier never plug in this unit and other components until all connections are completed. • before making any connections, switch off the power to the unit and the amplifier or other components. • connections should be made to the correct input terminals of the amplifier or othe...

  • Page 10

    5 en getting st arted english connecting the power cable after all other connections are completed, plug the power cable to an ac wall outlet. ■ voltage selector (asia and general models only) the voltage selector on the rear panel of this unit must be set for your local main voltage before plugging...

  • Page 11

    6 en controls and functions front panel natural sound compact disc player cdc-697 disc 1 2 3 4 5 standby /on power on off 2 3 1 4 5 6 7 8 9 0 q w playxchange 7 remote control sensor ....................................... P.3 8 t / e (skip/search) ...................................... P.11 9 r / y ...

  • Page 12

    7 en getting st arted english remote control transmitter synchro dimmer standby/on peak prog clear tape 3 2 1 6 5 4 9 8 7 index +10 0 output level mode disc scan repeat cdc8 wh26170 random disc skip + - open/ close text/ time 1 2 3 4 5 6 7 8 9 0 q w t y u i o p a s d e f r 1 standby/on ................

  • Page 13

    8 en the display located in the center of this unit provides information about discs. After closing the disc tray by pressing the open/close button or selecting any disc by using the disc skip buttons when this unit is stopped, the display shows the total number of tracks and the total recorded time...

  • Page 14

    English pla ying cds 9 en 2 close the disc tray. • you can also close the disc tray by pressing the w / d button on the front panel, a disc -select button on the front panel, a numeric button or the random button, or by pressing the front edge of the disc tray gently. If the tray is closed in these ...

  • Page 15

    10 en ■ to stop playback temporarily to resume playback, press the d button again (or press the w button). * the w / d button on the front panel can also be used to stop playback temporarily or to resume playback. ■ to stop playback completely playxchange during playback, you can open the disc tray ...

  • Page 16

    English pla ying cds 11 en skipping tracks ■ to play back from the beginning of the track following the one now playing back ■ to play back from the beginning of the track now playing back ■ to play back from the beginning of the track before the one now playing back • these operations can also be p...

  • Page 17

    12 en various functions random sequence play you can play back the tracks on one or more discs in a random sequence. The unit will automatically mix up tracks from all discs or a designated disc on the disc tray. 1 load one or more discs. 2 close the disc tray. 3 select a desired disc play mode (1di...

  • Page 18

    English pla ying cds 13 en program play you can enjoy listening to your favorite tracks selected from one or more discs in any desired order by programming tracks. 1 stop the unit. 2 if you will select tracks from a disc (or discs) other than the disc on the disc 1 tray, make this unit display the t...

  • Page 19

    14 en ■ display information during programming 1 shows the program number for the track to be programmed next. 2 shows the selected disc and track number. 3 shows the total time of the tracks currently programmed. 4 shows only the numbers of programmed tracks on the selected disc. * if “step 1” does...

  • Page 20

    English pla ying cds 15 en repeat play you can play back any desired track or disc (or a set of discs) repeatedly by pressing the repeat button. The repeat play mode will change whenever you press the repeat button. ■ rep s (single repeat) a single track is repeatedly played back. * this is also ava...

  • Page 21

    16 en timer play you can start playback at any specified time by connecting a timer (sold separately). (for details, refer to the owner’s manual of the timer.) 1 select the desired play mode (1disc or 5discs). 2 press the power button to turn the unit off. 3 press the power button while pressing the...

  • Page 22

    English functions for recording 17 en cd synchronized recording using a compatible yamaha tape deck, you can synchronize the tape deck to start recording automatically when this unit starts playback. With this function, you can record a cd on tape more easily and precisely. (for details, refer to th...

  • Page 23

    18 en you can select any of four tape lengths by pressing the tape button. You can also enter the total possible recording time of the tape manually. Example: for a c-64 tape (32 minutes on each side) 4 press the repeat button. The unit automatically programs tracks for side a and side b separately ...

  • Page 24

    English functions for recording 19 en manual tape programming with this function, you can program tracks from one or more discs in any order to be recorded onto tape. 1 stop the unit. 2 if you will select tracks from a disc (or discs) other than the disc on the disc 1 tray, make this unit display th...

  • Page 25

    20 en 8 when you finish the programming for side a, program the pause mode by pressing the tape button. * “pause” lights up in the display. 9 repeat steps 5 and 6 to program more tracks for side b of the tape. You can select the same track again. * if “error” appears in the display, the track number...

  • Page 26

    English functions for recording 21 en track programming for recording random tape programming the unit will automatically program tracks on a disc in random sequential order for recording to tape. 1 follow steps 1 to 3 on page 18. 2 press the random button. The unit will automatically program tracks...

  • Page 27

    22 en automatic peak level searching this unit automatically searches for the peak level of the disc, and play back the part repeatedly. When recording to tape, this feature is very helpful for adjusting the recording level on the tape deck. 1 stop the unit. 2 select the “1disc” disc play mode. 3 se...

  • Page 28

    English additional informa tion 23 en troubleshooting if the unit fails to operate normally, check the following points to determine whether the problem can be corrected by the simple measures suggested. If it cannot, or if the problem is not listed in the symptom column, disconnect the unit’s power...

  • Page 29

    24 en specifications audio section frequency response ...................... 10 hz – 20 khz, ± 0.5 db harmonic distortion + noise (1 khz) ......................... 0.003% s/n ratio .................................................................... 106 db dynamic range ................................

  • Page 30

    Line out rs-232c digital audio out optical out in remote control voltage selector 230- 240v r l (example: general model) varo! Avattaessa ja suojalukitus ohitettaessa olet alttiina nÄkymÄttÖmÄlle lasersÄteilylle. ÄlÄ katso sÄteeseen. Varning! Osynlig laserstrÅlning nÄr denna del Är Öppnad och spÄrre...

  • Page 31

    00_cv4_cdx-697_uab.P65 7/12/06, 13:22 2.

  • Page 32

    00_cv4_cdx-697_uab.P65 7/12/06, 13:22 3.

  • Page 33

    Yamaha electronics corporation, usa 6660 orangethorpe ave., buena park, calif. 90620, u.S.A. Yamaha canada music ltd. 135 milner ave., scarborough, ontario m1s 3r1, canada yamaha electronik europa g.M.B.H. Siemensstr, 22-34, 25462 rellingen, bei hamburg, germany yamaha electronique france s.A. Rue a...