Yamaha CDX-E100 Service Manual

CDX-E100

CDX-E100

1 0 0 6 8 5

SERVICE MANUAL

CDX-E100

IMPORTANT NOTICE

This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.

It has been assumed that basic service procedures inherant to the industry, and more specifically YAMAHA Products, are already

known and understood by the users, and have therefore not been restated.

WARNING:

Failure to follow appropriate service and safety procedures when servicing this product  may result in personal

injury, destruction of expensive components and failure of the  product to perform as specified. For these reasons,

we advise all YAMAHA product owners that all service required should be performed by an authorized

YAMAHA Retailer or the appointed service representative.

IMPORTANT:

The presentation or sale of this manual to any individual or firm does not constitute authorization,  certification  or

recognition  of  any  applicable  technical  capabilities,  or establish a principle-agent relationship of any form.

The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover.  The research, engineering, and

service departments of YAMAHA are continually striving  to improve YAMAHA products. Modifications are, therefore, inevitable

and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact

the distributor's Service Division.

WARNING:

Static discharges can destroy expensive components. Discharge any static electricity your body may have accumu-

lated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).

IMPORTANT:

Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.

IC DATA ................................................................ 12~16

DISPLAY DATA .......................................................... 17

IC BLOCK ............................................................. 18~19

PIN CONNECTION DIAGRAM ................................... 19

BLOCK DIAGRAM ................................................ 20~21

PRINTED CIRCUIT BOARD ................................ 22~27

SCHEMATIC DIAGRAM ............................................. 28

PARTS LIST .......................................................... 29~37

■ 

CONTENTS

TO SERVICE PERSONNEL ..................................... 1~2

REAR PANELS ............................................................. 3

SPECIFICATIONS ......................................................... 3

INTERNAL VIEW .......................................................... 4

DISASSEMBLY PROCEDURES .............................. 4~5

STANDARD OPERATION CHART .......................... 6~7

TEST MODE .............................................................. 8~9

ERROR MESSAGE ............................................... 10~11

CRX-E100 is composed of RX-E100 and

CDX-E100. This is a service manual for

the CDX-E100.

For service manuals of RX-E100, please

refer to the service manuals with the

following publication numbers :

RX-E100

100684

For the system operation, please refer

to Service Manual for the RX-E100.

MINI COMPONENT SYSTEM 

CRX-E100