Yamaha Clavinova CLP-121S Owner's Manual - Selecting & Playing Voices
7
Z
Turn Power On
After making sure that the Clavinova’s AC plug is properly inserted into
a convenient AC wall outlet, press the [POWER] switch located to the left
of the keyboard to turn the power ON.
When the power is turned ON, the [PIANO] voice selector LED will
light (the PIANO voice is automatically selected whenever the power is
turned ON).
Initially set the [MASTER VOLUME] control about half way between
the “MIN” and “MAX” settings. Then, when you start playing, re-adjust the
[MASTER VOLUME] control for the most comfortable listening level.
Select the desired voice by pressing one of the voice selectors.
The Clavinova offers keyboard touch response, so the volume and timbre
of notes played can be controlled according to how “hard” you play the
keys. The amount of variation available depends on the selected voice.
Selecting & Playing Voices
X
Set the Volume
POWER
MASTER VOLUME
MIN
MAX
C
Select a Voice
CLAVINOVA
TONE
HARPSI-
CHORD
ORGAN
E. PIANO
PIANO
V
Play
Playing the Demonstration Tune
Press the G6 key while holding the [MIDI/TRANSPOSE] button to start
demo playback.
Use the [MASTER VOLUME] control to adjust the volume, and play
along on the keyboard if you like.
Press the [MIDI/TRANSPOSE] button when you want to stop demo
playback and return to the normal play mode.
The Demo Tune
“Für Elise” by Beethoven (PIANO voice)
* The demonstration piece is a short excerpt from the original composition.
Z
Start the Demo Tune
X
Set the Volume
MASTER VOLUME
MIN
MAX
C
Stop the Demo
MIDI/
TRANSPOSE
The CLP-121S features a demonstration tune that effectively demonstrates its sound capabilities.
Here’s how you can play the demo tune.
G
6
MIDI/
TRANSPOSE