Yamaha Clavinova CLP-920 Owner's Manual - page 20

Other manuals for Clavinova CLP-920: Service Manual

Page of 32

Download

Print this page

Bookmark us

CLP-920

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

MIDI Data Format/MIDI-Datenformat/Format des données MIDI/Formato de datos MIDI

MIDI Master Volume

• Simultaneously changes the volume of all channels.

• When a MIDI master volume message is received, the volume

only has affect on the MIDI receive channel, not the panel master

volume.

F0H

= Exclusive status

7FH

= Universal Realtime

7FH

= ID of target device

04H

= Sub-ID #1=Device Control Message

01H

= Sub-ID #2=Master Volume

= Volume LSB

mmH

= Volume MSB

F7H

= End of Exclusive

F0H

= Exclusive status

7FH

= Universal Realtime

XnH

= When received, n=0~F. X = don’t care

04H

= Sub-ID #1=Device Control Message

01H

= Sub-ID #2=Master Volume

= Volume LSB

mmH

= Volume MSB

F7H

= End of Exclusive

(2) Universal Non-Realtime Message (GM 0n)

General MIDI Mode On

Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] -> [F7H]

F0H

= Exclusive status

7EH

= Universal Non-Realtime

7FH

= ID of target device

09H

= Sub-ID #1=General MIDI Message

01H

= Sub-ID #2=General MIDI On

F7H

= End of Exclusive

F0H

= Exclusive status

7EH

= Universal Non-Realtime

XnH

= When received, n=0~F. X = don’t care

09H

= Sub-ID #1=General MIDI Message

01H

= Sub-ID #2=General MIDI On

F7H

= End of Exclusive

When the General MIDI mode ON message is received, the MIDI

system will be reset to its default settings.

This message requires approximately 50ms to execute, so sufficient

time should be allowed before the next message is sent.

7. SYSTEM EXCLUSIVE MESSAGES (XG Standard)

(1) XG Native Parameter Change

Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] ->

[mmH] -> [ll H] -> [ddH] -> [F7H]

F0H

= Exclusive status

43H

= YAMAHA ID

1nH

= When received, n=0~F. When transmitted, n=0.

4CH

= Model ID of XG

hhH

= Address High

mmH

= Address Mid

= Address Low

ddH

= Data

F7H

= End of Exclusive

Data size must match parameter size.

When the XG System On message is received, the MIDI system will

be reset to its default settings.

The message requires approximately 50ms to execute, so sufficient

time should be allowed before the next message is sent.

(2) XG Native Bulk Data (reception only)

Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aaH] ->

[bbH] -> [hhH] -> [mmH] -> [ll H] ->

[ddH] ->...-> [ccH] -> [F7H]

F0H

Exclusive status

43H

YAMAHA ID

0nH

When received, n=0~F. When transmitted, n=0.

4CH

Model ID of XG

aaH

ByteCount

bbH

ByteCount

hhH

Address High

mmH

Address Mid

Address Low

ddH

Data

ccH

Check sum

F7H

End of Exclusive

• Receipt of the XG SYSTEM ON message causes reinitialization of

relevant parameters and Control Change values. Allow sufficient

time for processing to execute (about 50 msec) before sending the

Clavinova another message.

• XG Native Parameter Change message may contain two or four

bytes of parameter data (depending on the parameter size).

• For information about the Address and Byte Count values, refer to

Table 1 below. Note that the table’s Total Size value gives the size of

a bulk block. Only the top address of the block (00H, 00H, 00H) is

valid as a bulk data address.

8. SYSTEM EXCLUSIVE MESSAGES (Special Control)

Data format: [F0H] -> [43H] -> [73H] -> [xxH] -> [11H] ->

[0nH] -> [ccH] -> [vvH] -> [F7H]

F0H

= Exclusive status

43H

= Yamaha ID

73H

= Clavinova ID

67H

= CLP-920 ID

11H

= Clavinova special control

0nH

= Control MIDI change (n=channel number)

= Control number

= Value

F7H

= End of Exclusive

Control

ccH

vvH

Voice Reserve

ch: 00H-0FH

45H

00H : Reserve off

7FH : on*

* When Volume, Expression is received for Reserve On, they will be

effective from the next Key On. Reserve Off is normal.

9. SYSTEM EXCLUSIVE MESSAGES (Others)

Data format: [F0H] -> [43H] -> [1nH] -> [27H] -> [30H] ->

[00H] -> [00H] -> [mmH] -> [ll H] -> [ccH] -> [F7H]

Master Tuning (XG and last message priority) simultaneously

changes the pitch of all channels.

F0H

= Exclusive Status

43H

= Yamaha ID

1nH

= Transmission from n=CLP is always 0. 0-F is received.

27H

= Model ID of TG100

30H

= Sub ID

00H

mmH

= Master Tune MSB

= Master Tune LSB

ccH

= don’t care (under 7FH)

F7H

= End of Exclusive

MIDI Parameter Change table ( SYSTEM )

Address (H)

Size (H)

Data (H)

Parameter

Description

Default value (H)

00 00 00

020C - 05F4(*1) MASTER TUNE

-50 - +50[cent]

00 04 00 00

1st bit 3 - 0

→ bit 15 - 12

400

2nd bit 3 - 0

→ bit 11 - 8

3rd bit 3 - 0

→ bit 7 - 4

4th bit 3 - 0

→ bit 3 - 0

00 - 7F

MASTER VOLUME

0 - 127

—

34 - 4C(*2)

TRANSPOSE

-12 - +12[semitones]

XG SYSTEM ON

00=XG sytem ON

RESET ALL PARAMETERS

00=ON (receive only)

TOTAL SIZE

*1: Values lower than 020CH select -50 cents. Values higher than 05F4H select +50 cents.

*2: Values from 28H through 33H are interpreted as -12 through -1. Values from 4DH through 58H are interpreted as +1 through +12.

« ‹ Prev 17 18 19 20 21 22 23 Next › »

Summary of Clavinova CLP-920

Page 1
Important check your power supply make sure that your local ac mains voltage matches the volt- age specified on the name plate on the bottom panel. In some ar- eas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selecto...
Page 2: Special Message Section
92-469 1 environmental issues: yamaha strives to pro- duce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you t...
Page 3: Precautions
3 clp-920 • take care that the key cover does not pinch your fingers, and do not insert a finger or hand in the key cover gap. • never insert or drop paper or metallic or other objects between the slits of the key cover and the keyboard. If this happens, immediately turn off the power and remove the...
Page 4: Contents
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 4 clp-920 contents the control panel ......................................................... 5 key cover & music stand ............................................ 6 ● key cover .............
Page 5: The Control Panel
5 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ clp-920 the control panel soft pedal 1 [power] switch press the [power] switch once to turn the power on, a second time to turn the power off. When the power is turned on, the power indi...
Page 6: Key Cover & Music Stand
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 6 clp-920 key cover & music stand to open the key cover: z lift the cover slightly. X slide the cover open. Caution • hold the cover with both hands when moving it, and do not release it unt...
Page 7: Connections
7 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ clp-920 to host host select pc-1 pc-2 mac midi pedal aux in r l/l+r aux out r l/l+r midi in out thru host select to host midi mac pc-2 pc-1 bottom panel connections 1 aux out l/l+r and r...
Page 8: Selecting & Playing Voices
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 8 clp-920 turn power on ................................................................................................... After making sure that the clavinova’s ac cord is properly plugged...
Page 9: The Dual Mode
9 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ clp-920 the clp-920 includes four demo tunes that demonstrate its sound capabili- ties. Here is how you can select and play the demo tunes: note • no midi reception occurs in the demo so...
Page 10: The Pedals
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 10 clp-920 the pedals soft (left) pedal ............................................................................................... The soft pedal reduces the volume and slightly changes...
Page 11: Transposition
11 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ clp-920 transposition z simultaneously press and hold the a-1 and c#0 keys. X press any key between f#2 and f#3 according to the desired amount of transposition.* c release the a-1 and ...
Page 12: Tuning
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 12 clp-920 tuning tuning makes it possible to adjust the pitch of the clavinova over a 427.0 hz … 453.0 hz (corresponding to the a3 note’s hz) range in approximately 0.2 hertz intervals. Pit...
Page 13: Midi Functions
13 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ clp-920 midi transmit & receive channel selection ................................................................................................... Tone generator midi in midi in midi...
Page 14: Midi Functions
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 14 clp-920 a -1 c# 0 c 1 d# 2 c 4 d# 5 1 3 5 6 8 10 12 13 15 1 3 5 6 8 10 12 13 15 2 4 7 9 11 14 16 2 4 7 9 11 14 16 e 5 e 2 ● setting the clavinova midi channels for setting the transmit ch...
Page 15
15 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ clp-920 connecting to a personal computer although the clavinova can be connected to a personal computer via the midi in/out connectors and a midi interface, the to host connector and h...
Page 16
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 16 clp-920 connecting to an ibm-pc/at series computer ............ Connect the to host connector of the clavinova to the rs-232c port on your ibm computer, using a standard 8-pin mini din → ...
Page 17
17 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ clp-920 connecting to a personal computer using a usb interface (such as the yamaha ux256) connect the usb interface (yamaha ux256 or equivalent) to your computer using a usb cable. Ins...
Page 18: Troubleshooting
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 18 clp-920 troubleshooting if you encounter what appears to be a malfunction, please check the follow- ing points before assuming that your clavinova is faulty. 1. No sound when the power is...
Page 19
19 clp-920 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ damper pedal 0 (off) sostenuto 0 (off) soft pedal 0 (off) (3) local control (reception only) cch parameter data range (vvh) 7ah local control 00h (off), 7fh (on) (4) all notes o...
Page 20
20 clp-920 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ midi data format/midi-datenformat/format des données midi/formato de datos midi midi master volume • simultaneously changes the volume of all channels. • when a midi master volume...
Page 21
21 clp-920 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ yamaha [clavinova] date: 1 march, 2000 model: clp-920 midi implementation chart version: 1.0 function transmitted recognized remarks basic default 1 1 channel changed 1~16 1~16 ...
Page 22: Zusammenbau Und Aufstellung
22 clp-920 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ assembly parts / bauteile / Éléments à assembler / partes del conjunto caution • be careful not to confuse parts, and be sure to install all parts in the correct direction. Please...
Page 23
23 clp-920 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 1 assemblage du support de clavier precaution • veiller à ne pas mélanger les pièces et à les installer dans le sens correct. Veuillez assembler l’instrument dans l’ordre indiqu...
Page 24
24 clp-920 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 2 x schrauben sie die rückwand (b) an die bei- den seitenwände (d). Die rückwand (b) wird mit den winkelblechen an beiden enden nach hinten weisend an den seitenwänden (d) befesti...
Page 25
25 clp-920 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 10 cm 10 cm 3 x fixez le panneau arrière (b) aux panneaux latéraux (d) le panneau arrière (b) doit être posé entre les panneaux laté- raux (d) en prenant soin de diriger la ferr...
Page 26
26 clp-920 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 4 5 v schließen sie das pedalkabel an. Das vom pedalkasten kommende pedalkabel wird an die pedal- buchse hinten an der unterseite der tastatureinheit angeschlossen. Bringen sie na...
Page 27
27 clp-920 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ v raccordez le câble du pédalier le câble du pédalier qui sort du logement de pédalier doit être raccordé au connecteur pedal implanté à l’arrière du panneau de dessus de l’inst...
Page 28
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 28 clp-920 voice name title composer grand piano Étude op. 10-5 “black key” f.F.Chopin e.Piano clair de lune c.A.Debussy church organ organ concerto op.4 no.2 g.F.Händel strings brandenburgi...
Page 29
29 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ clp-920 keyboard polyphony voices reverb control pedal controls other control jacks/connectors input & output level/impedance main amplifiers speakers dimentions without music stand (w ...
Page 30: 10.
Warning- when using any electrical or electronic prod- uct, basic precautions should always be followed. These pre- cautions include, but are not limited to, the following: 1. Read all safety instructions, installation instructions, special message section items, and any assembly instructions found ...
Page 31
For details of products, please contact your nearest yamaha or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. Die einzelheiten zu produkten sind bei ihrer unten...
Page 32: Fcc Information (U.S.A.)
Fcc information (u.S.A.) 1. Important notice: do not modify this unit! This product, when installed as indicated in the instructions con- tained in this manual, meets fcc requirements. Modifications not expressly approved by yamaha may void your authority, granted by the fcc, to use the product. 2. ...