1. DL manuals
  2. Yamaha
  3. Musical Instrument
  4. Clavinova CVP-207
  5. Owner's Manual

Yamaha Clavinova CVP-207 Owner's Manual

Other manuals for Clavinova CVP-207: Data List
Manual is about: Yamaha Clavinova Owner's Manual

Summary of Clavinova CVP-207

  • Page 1

    M.D.G., pro audio & digital musical instrument division, yamaha corporation © 2002 yamaha corporation v954900 ???Ap???.?-0?A0 printed in indonesia clavinova web site (english only) http://www.Yamahaclavinova.Com/ yamaha manual library http://www2.Yamaha.Co.Jp/manual/english/ owner’s manual owner’s m...

  • Page 2

    Introduction special message section product safety markings: yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions ind...

  • Page 3

    3 cvp-900 precautions please read carefully before proceeding * please keep this manual in a safe place for future reference. Warning always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or ot...

  • Page 4

    Cvp-900 4 • before connecting the instrument to other electronic compo- nents, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to mini- mum. Also, be sure to set the volumes of all components at their minimum levels and gradually ra...

  • Page 5

    5 cvp-900 thank you for purchasing the yamaha clavinova! We recommend that you read this manual carefully so that you can fully take advantage of the advanced and convenient functions of the clavinova. We also recommend that you keep this manual in a safe and handy place for future reference. About ...

  • Page 6

    Cvp-900 6 accessories ■ “50 greats for the piano” disk (and music book) ■ recording disk use this blank disk to save your performance. ■ owner’s manual this manual contains complete instructions for operating your clavinova. ■ data list this manual contains lists of voices, styles and parameters, et...

  • Page 7

    7 cvp-900 • never attempt to remove the disk or turn the power off when the data is being written to the floppy disk. Doing so can damage the disk and possibly the disk drive. Press the eject button slowly as far as it will go; the disk will automatically pop out. When the disk is fully ejected, car...

  • Page 8

    Cvp-900 8 about the display messages a message (information or confirmation dialog) sometimes appears on the screen to facilitate operation. When such messages appear, simply follow the instructions as shown by pressing the corresponding button. Maintenance clean the instrument using a dry, soft clo...

  • Page 9

    9 cvp-900 table of contents introduction special message section ................................... 2 precautions .......................................................... 3 about this owner’s manual and data list .............. 5 accessories ..........................................................

  • Page 10

    Cvp-900 10 saving and recalling custom panel setups — registration memory ........ 85 registering panel setups — registration memory...................................... 85 saving your registration memory setups .................86 recalling a registration memory setup ................ 87 editing v...

  • Page 11

    11 cvp-900 introduction quick guide basic operations - organizing your data playing the demos voices styles song playback saving and recalling custom panel setups - registration memory editing voices - sound creator recording your performances and creating songs - song creator creating accompaniment...

  • Page 12

    Cvp-900 12 application index use this index to find reference pages that may be helpful for your particular application and situation. Listening listening to the internal songs ................................................................................................................ Page 75 li...

  • Page 13

    13 cvp-900 using a microphone connecting the microphone.............. ”connecting the microphone or guitar (mic./line in jack)” on page 152 adding automatic harmonies to your singing ....................................................................................... Page 128 settings registering...

  • Page 14

    Cvp-900 14 power metronome master volume style acmp auto fill in ots link break intro main start stop on min max off ending rit. Tap tempo rew repeat top ff rec mic. Signal over fade in out demo help function sound creator digital recording mixing console balance channel on off transpose tempo sync....

  • Page 15

    15 cvp-900 f j i 4 5 6 7 8 exit back next voice part piano on off harmony echo left hold mono h g layer piano & harpsi. E. Piano percussion guitar bass organ flutes organ & accordion brass woodwind choir & pad synth. Xg user strings left data entry freeze memory 1 1 4 3 2 3 4 7 5 8 6 2 enter voice e...

  • Page 16

    Cvp-900 16 setting up the clavinova ■ to open the key cover: lift the cover slightly, then push and slide it open. ■ to close the key cover: slide the cover toward you and gently lower the cover over the keys. Caution hold the cover with both hands when opening or closing it. Do not release it until...

  • Page 17

    17 cvp-900 ■ to close the lid: 1 hold the lid stay and carefully raise the lid. 2 hold the lid in its raised position and lower the lid stay. 3 carefully lower the lid. 4 lower the music rest as described in “music rest” on page 16. Caution • make sure that the end of the stay fits securely in the l...

  • Page 18

    Cvp-900 18 panel controls and terminals power [on / off] button (power)................................................ P. 17 metronome [start / stop] button (metronome) ............................. P. 51 master volume [master volume] dial...................................................... P. 17...

  • Page 19

    19 cvp-900 voice voice buttons ..................................................................... P. 55 music finder [music finder] button ...................................................... P. 70 one touch setting [1] - [4] buttons (one touch setting)............................ P. 68 piano s...

  • Page 20

    Quick guide 20 quick guide . . . . . . . . . . . . . . . . . . . . . . . . . Playing the demos the clavinova features an extensive variety of demo songs, that showcase its rich, authentic voices and its dynamic rhythms and styles. What’s more, there’s a special selection of demo functions. These tak...

  • Page 21

    Song playback quick guide 21 song playback here’s where all of the amazing voices, effects, rhythms, styles and other sophisticated features of the clavinova come together — in songs! As you heard in the demos, the clavinova contains many built-in recordings. But there’s more. Call up the song open ...

  • Page 22

    Song playback quick guide 22 2 press the [a] button to call up the song open display. If the main screen is not displayed, press the [direct access] button followed by the [exit] button. 3 press the [a] button to select the preset songs (song book) folder. A e d c b press the [back] / [next] button ...

  • Page 23

    Song playback quick guide 23 4 press one of the [a] to [j] buttons to select a song file. 5 press the song [start/stop] button to start playback. 6 while the song is playing, try using the mute function to turn certain instrument channels off or on — letting you craft dynamic arrangements on the fly...

  • Page 24

    Song playback quick guide 24 7 finally, take the producer’s seat and try your hand at mixing. These balance controls let you adjust the levels of the individual parts — the song, the style, your singing, and your playing. 1) press the [balance] button. 2) press the [1 - 8 ▲▼ ] button corresponding t...

  • Page 25

    Playing voices quick guide 25 playing voices the clavinova features a stunning variety of over 800 dynamic, rich and realistic voices. Try playing some of these voices now and hear what they can do for your music. Here, you’ll learn how to select individual voices, combine two voices in a layer, and...

  • Page 26

    Playing voices quick guide 26 3 select a voice. 4 play the voices. Naturally, you can play the voice yourself from the keyboard, but you can also have the clavinova demonstrate the voice for you. Simply press the [8 ▲ ] button from the display above, and a demo of the voice plays automatically. Play...

  • Page 27

    Playing voices quick guide 27 playing different voices with the left and right hands 1 press the voice part on/off [left] button to turn the left part on. 2 press the [h] button to select the left part. 3 select a voice group. Here, we’ll select the “strings” group — so that you can play rich, orche...

  • Page 28

    Playing styles quick guide 28 playing styles the clavinova has a huge variety of musical “styles” that you can call upon to back up your own performance. They give you anything from a simple, yet effective piano backing or percussion accompaniment to a full band or orchestra. Playing a style 1 press...

  • Page 29

    Playing styles quick guide 29 3 turn acmp on. The specified left-hand section of the keyboard becomes the “auto accompaniment” section, and chords played in this section are automatically detected and used as a basis for fully automatic accompaniment with the selected style. 4 turn sync.Start on. 5 ...

  • Page 30

    Playing styles quick guide 30 style sections each style in the auto accompaniment is made up of “sections.” since each section is a rhythmic variation of the basic style, you can use them to add spice to your performance and mix up the beats — while you’re playing. Intros, endings, main patterns, an...

  • Page 31

    Playing styles quick guide 31 8 press the [auto fill in] button to add a fill-in, if necessary. Fill-in patterns play automatically between each change in the main sections. 9 press the [ending] button. This switches to the ending section. When the ending is finished, the style automatically stops. ...

  • Page 32

    Playing styles quick guide 32 one touch setting one touch setting is a powerful and convenient feature that automatically calls up the most appropriate panel settings (voice number, etc.) for the currently selected style, with the touch of a single button. This is a wonderful way to instantly reconf...

  • Page 33

    Music finder quick guide 33 music finder if you want to play in a certain song but don’t know which style and voice settings would be appropriate, the convenient music finder can help you out. Simply select the song name from the music finder and the cvp-900 automatically makes all appropriate panel...

  • Page 34

    Music finder quick guide 34 searching the music finder records the music finder is also equipped with a convenient search function that lets you enter a song title or keyword — and instantly call up all the records that match your search criteria. 1 press the [music finder] button. 2 press the [i] b...

  • Page 35

    Music finder quick guide 35 7 select a record (see step #2 on page 33) and play along with the style playback. Press the [exit] button to return to the main display. You can also create your own music finder setups and save them to floppy disk (pages 39 and 45). In this way, you can expand your musi...

  • Page 36

    Playing and practicing with the songs quick guide 36 playing and practicing with the songs playing along with the clavinova in this section, try using the clavinova’s song playback features to cancel or mute the right-hand melody while you play the part yourself. It’s like having a very talented and...

  • Page 37

    Playing and practicing with the songs quick guide 37 recording the clavinova lets you record, too — quickly and easily. Try out the quick recording feature now and capture your keyboard performance. 1 - 3 select a voice for recording. Use the same operations as in “playing a voice” on pages 25, 26. ...

  • Page 38

    Playing and practicing with the songs quick guide 38 mastering your favorite songs the clavinova has several very useful practice features that help learn and master recorded songs. Here, you’ll try out the follow lights function, and use the special guide lamps to help you play the right notes. 1 -...

  • Page 39

    39 cvp-900 basic operations — organizing your data the cvp-900 utilizes a variety of data types — including voices, accompaniment styles, songs and registration memory settings. Much of this data is already programmed and contained in the cvp-900; you can also create and edit your own data with some...

  • Page 40

    Basic operations — organizing your data cvp-900 40 example — open/save display for voice each open/save display consists of preset, user, and floppy disk drive pages. Back next preset drive the files that are pre- programmed and installed internally to the cvp-900 are kept here. Preset files can be ...

  • Page 41

    Basic operations — organizing your data 41 cvp-900 select a file shown in the display. In this example, we’ll select a voice file. First, press the voice [piano & harpsi] button to call up the display containing the files. This display (“open/save” display) is typical of those used to call up and st...

  • Page 42

    Basic operations — organizing your data cvp-900 42 naming files/folders you can assign names to files and folders. Any file/folder in the user and floppy disk sections can be named or renamed. Execute the following steps when there is data in the user drive. If there are preset files/folders you wis...

  • Page 43

    Basic operations — organizing your data 43 cvp-900 moving files/folders you can move files and folders as desired, for organizing your data. Any file/folder in the user and floppy disk sections can be moved, using the cut-and-paste operation described below. E nd 1 press the [2 ▼ ] (cut) button (pag...

  • Page 44

    Basic operations — organizing your data cvp-900 44 copying files/folders you can also copy files and folders as desired, for organizing your data. Any file/folder in the preset , user and floppy disk sections can be copied, using the copy-and-paste operation described below. Deleting files/folders y...

  • Page 45

    Basic operations — organizing your data 45 cvp-900 saving files this operation lets you save the data (such as song and voice) you created in current memory (page 40) to files. The files can be saved only to the user and floppy disk drives. If the open/save display for the type of data you wish to s...

  • Page 46

    Basic operations — organizing your data cvp-900 46 entering characters the instructions that follow show you how to enter characters in naming your files and folders. The method is much the same as inputting names and numbers to your cell phone. 1 move the cursor to the desired position by using the...

  • Page 47

    Basic operations — organizing your data 47 cvp-900 changing the icon you can also change the icon that appears at the left of the file name. Call up the icon select display by pressing the [1 ▼ ] (icon) button from the character input display (page 46). Select the desired icon by using the [a] - [j]...

  • Page 48

    Basic operations — organizing your data cvp-900 48 with the convenient direct access function, you can instantly call up the desired display — with just a single additional button press. Press the [direct access] button and a message appears in the display prompting you to press the appropriate butt...

  • Page 49

    Basic operations — organizing your data 49 cvp-900 direct access chart operation: [direct access] button + button listed below corresponding lcd display and function see pages style [acmp] function chord fingering fingering type selection 139 [break] mixing console (style part) volume/voice voice se...

  • Page 50

    Basic operations — organizing your data cvp-900 50 the help messages give you explanations and descriptions of all the main functions and features of the cvp-900. Help messages power metronome master volume style acmp auto fill in ots link break intro main start stop on min max off ending rit. Tap t...

  • Page 51

    Basic operations — organizing your data 51 cvp-900 the metronome provides a click sound, giving you an accurate tempo guide when you practice, or letting you hear and check how a specific tempo sounds. The metronome starts by pressing the metronome [start/stop] button. Adjust the tempo by using the ...

  • Page 52

    Basic operations — organizing your data cvp-900 52 tap tempo this useful feature lets you tap out the tempo for a song or an accompaniment style. Simply tap the [tap tempo] button at the desired speed, and the tempo of the song or the accompaniment style changes to match your tapping. ■ tempo indica...

  • Page 53

    53 cvp-900 reference playing the demos the cvp-900 is an extraordinarily versatile and sophisticated instrument, featuring a wide variety of dynamic voices and rhythms, plus a wealth of advanced functions. Three different types of demo songs have been specially prepared showcasing the stunning sound...

  • Page 54

    Playing the demos cvp-900 54 a e d c b f j i 1 2 3 4 5 6 7 8 h g exit 4 relevant explanations are shown in the display. E nd return to the main screen. F j i back next voice part on off h g layer left data entry enter 1 2 3 4 5 6 7 8 this example shows the voices in the function demo. 3 for the func...

  • Page 55

    55 cvp-900 voices the cvp-900 gives you an enormous selection of authentic voices, including various keyboard instruments, strings and brass — and many, many more. Power metronome master volume style acmp auto fill in ots link break intro main start stop on min max off ending rit. Tap tempo rew repe...

  • Page 56

    Voices cvp-900 56 one-touch piano play this convenient, easy-to-use feature completely and automatically reconfigures the entire cvp-900 for optimum piano performance. No matter what settings you’ve made from the panel, you can instantly call up the piano settings by a single button press. Piano but...

  • Page 57

    Voices 57 cvp-900 the cvp-900 lets you set three voices for simultaneous play: main, layer, and left. By effectively combining these three, you can create richly textured, multi-instrument setups for your performance. Playing a layer of two voices playing two voices separately — on the left and righ...

  • Page 58

    Voices cvp-900 58 left — setting separate voices for the left and right sections of the keyboard this section of the panel lets you add a variety of effects to the voices you play on the keyboard. ■ reverb reverb is an effect that recreates the acoustic ambiance of a performance space — anything fro...

  • Page 59

    Voices 59 cvp-900 ■ harmony/echo this control adds harmony or echo effects to the voices played on the right hand section of the keyboard (page 143). ■ mono this control determines whether the voice is played monophonically (only one note at a time) or polyphonically for each part (main/layer/left)....

  • Page 60

    Cvp-900 60 styles the cvp-900 features styles (accompaniment patterns) in a variety of different musical genres including pops, jazz, latin and dance. To use it, all you have to do is play the chords with your left hand as you perform and the selected accompaniment style (style) matching your music ...

  • Page 61

    Styles 61 cvp-900 style acmp sync.Stop sync.Start start / stop style acmp auto fillin ots link break intro main ending / rit. Sync.Stop sync.Start start / stop a b c d style acmp auto fillin ots link break intro main ending / rit. A b c d sync.Stop sync.Start start / stop auto accompaniment section ...

  • Page 62

    Styles cvp-900 62 playing a style’s rhythm channels only. Adjusting the volume balance/channel muting style acmp auto fillin ots link break intro main ending / rit. Sync.Stop sync.Start start / stop a b c d rhythm starts. 1 select a style (page 60). The rhythm channels are part of the styles. Each s...

  • Page 63

    Styles 63 cvp-900 the style playback can be controlled by the chords you play in the keys to the left of the split point. There are 7 types of fingerings as described below. Go to the chord fingering page (page 139), and select the chord fingerings. The page shows how to play chords with your left h...

  • Page 64

    Styles cvp-900 64 * only this voicing (inversion) is recognized. Other chords not marked with an asterisk can be played in any inversion. Chord name [abbreviation] normal voicing display for root “c” major [m] 1 - 3 - 5 c ninth [9] 1 - 2 - 3 - 5 c9 sixth [6] 1 - (3) - 5 - 6 c6 sixth ninth [6 9 ] 1 -...

  • Page 65

    Styles 65 cvp-900 the cvp-900 features various types of auto accompaniment sections that allow you to vary the arrangement of the style. They are: intro, main, break and ending. By switching among them as you play, you can easily produce the dynamic elements of a professional- sounding arrangement i...

  • Page 66

    Styles cvp-900 66 stopping the style playback while releasing keys (sync. Stop) when the synchro stop function is engaged, accompaniment playback will stop completely when all keys in the auto accompaniment section of the keyboard are released. Accompaniment playback will start again as soon as the ...

  • Page 67

    Styles 67 cvp-900 selecting intro and ending types (intro/ending) playing fill-in patterns automatically when changing accompaniment sections — auto fill in a e d c b e d select a intro select a ending 3 play the style using the intro or ending section (page 30, 31). 1 2 to call up the [main] dis- p...

  • Page 68

    Styles cvp-900 68 the convenient one touch setting function makes it easy for you to select voices and effects that are appropriate to the style you’re playing. Each preset style has four pre-programmed panel setups that you can select by pressing a single button. Appropriate panel setting for the s...

  • Page 69

    Styles 69 cvp-900 automatically changing one touch settings with the sections — ots link the convenient ots (one touch setting) link function lets you automatically have one touch settings change when you select a different main section (a - d). Registering the panel controls in one touch setting (o...

  • Page 70

    Styles cvp-900 70 the music finder feature lets you instantly call up the appropriate settings for the instrument — including voice, style, and one touch settings — simply by selecting the desired song title. If you want to play a certain song but don’t know which style and voice settings would be a...

  • Page 71

    Styles 71 cvp-900 searching the ideal setups — music finder search you can search the record by music title or keywords. The results appears in the display. ■ [a] music searches by music or song title. Press this button to call up the display for inputting the song title. When you enter the song tit...

  • Page 72

    Styles cvp-900 72 editing records — music finder record edit from this display, you can call up existing records and edit them to suit your preferences. You can even use this to create your own music finder records. ■ [a] music selects the music or song title for editing. Press the button to call up...

  • Page 73

    Styles 73 cvp-900 ■ [1 ▼▲ ] tempo determines the tempo for the selected style. When changing the style with the [c] button, the tempo is automatically changed to that of the changed style. ■ [3 ▼▲ ]~[5 ▼▲ ] genre indicates and changes the genre to which the selected record is assigned. The available...

  • Page 74

    Cvp-900 74 song playback here you’ll learn how to play back songs. Songs include the internal songs of the instrument, performances you’ve recorded yourself using the recording functions (page 94), and commercially available song data. You can use this highly versatile feature in a variety of ways —...

  • Page 75

    Song playback 75 cvp-900 playing the internal songs song playback a e d c b f j i back h g a e d c b f j i back h g rec top start / stop rew ff repeat guide new song sync.Start e nd 2 -2 open a folder and select a song to be played back. 2 -1 select the preset tab with the [back] button. You can ena...

  • Page 76

    Song playback cvp-900 76 simultaneously playing a song and an accompaniment style when playing back a song and an accompaniment style at the same time, channels 9 - 16 of the song data are replaced with accompaniment style channels — allowing you to use the auto accompaniment styles and features in ...

  • Page 77

    Song playback 77 cvp-900 playing back songs on disk insert the disk into the drive. The method for playing back is the same as in the “playing the internal songs” instructions (page 75), except that you should select floppy disk page in the song display. Other playback-related operations ■ repeat / ...

  • Page 78

    Song playback cvp-900 78 this feature lets you mute certain parts of the song (track1, track2, extra tracks), and play back only those parts you want to hear. For example, if you want to practice the melody of a song, you can mute just the right-hand part and play that part yourself. This feature al...

  • Page 79

    Song playback 79 cvp-900 these fun features make it easy to learn new music. The key guide lamps indicate the notes you should play, when you should play them, and how long you should hold them down. Also, when you sing and play along with a song using a connected microphone, the clavinova automatic...

  • Page 80

    Song playback cvp-900 80 practicing music with the guide functions a e d c b 1 2 3 4 5 6 7 8 selects the specific practice function. Turns the key guide lamps on/off. Determines the timing by which the key guide lamps light. Just ..... The guide lamp lights in time with the music, at the same time y...

  • Page 81

    Song playback 81 cvp-900 with this feature, you can have the notation automatically shown on the display as the song plays. This can be used with your own recordings as well as the internal demo songs. Displaying music notation — score a e d c b 1 2 3 4 5 6 7 8 1 select the desired song (page 75, 77...

  • Page 82

    Song playback cvp-900 82 detailed settings for notation ■ [1 ▲▼ ] left ch/[2 ▲▼ ] right ch this determines the left channel (channel for the left-hand part) and right channel (channel for the right-hand part). This setting returns to auto when a different song is selected. Auto ........................

  • Page 83

    Song playback 83 cvp-900 ■ [6 ▲▼ ] note name select the note name type when “ note ” (page 81) is set to on. Abc ................. Note names are indicated as letters (c, d, e, f, g, a, b). Fixed do .......... Note names are indicated in solfeggio and differ depending on the selected language (page ...

  • Page 84

    Song playback cvp-900 84 this function lets you display the lyrics while the song is playing back — making it easy to sing along with your performance or song playback. Displaying the lyrics a e d c b 1 select the desired song (page 75, 77). 3 the lyrics can also be shown on a connected tv (page 144...

  • Page 85

    85 cvp-900 saving and recalling custom panel setups — registration memory registration memory is a powerful feature that lets you set up the clavinova just as you want — selecting specific voices, styles, effect settings etc. — and save your custom panel setup for future recall. Then, when you need ...

  • Page 86

    Saving and recalling custom panel setups — registration memory cvp-900 86 saving your registration memory setups the settings registered to the registration memory [1]-[8] buttons are saved as a single file. Registration edit display the contents of the current registration memory bank (regist.) are...

  • Page 87

    Saving and recalling custom panel setups — registration memory 87 cvp-900 you can recall all of the panel settings you’ve made — or only those you specifically want or need. For example, if you de-select “style” in the registration memory display, you can keep the currently selected style even when ...

  • Page 88

    Cvp-900 88 editing voices — sound creator the cvp-900 has a sound creator feature that allows you to create your own voices by editing some parameters of the existing voices. Once you’ve created a voice, you can save it as a user voice for future recall. • the voice can be edited in realtime while p...

  • Page 89

    Editing the voice — sound creator 89 cvp-900 sound creator parameters (natural/regular voices) the parameters for organ flutes, see page 93. The following parameters are linked to the ones in each display. Piano determines the parameters unique to piano sounds, such as tuning curve or sustain sampli...

  • Page 90

    Editing the voice — sound creator cvp-900 90 piano (natural piano voice has been selected) the explanations here apply to step #3 on page 88. Common the explanations here apply to step #3 on page 88. Sound (regular voice only) the explanations here apply to step #3 on page 88. 1 2 3 4 5 6 7 8 these ...

  • Page 91

    Editing the voice — sound creator 91 cvp-900 ■ filter filter settings determine the overall timbre of the sound by boosting or cutting a certain frequency range. ■ eg the eg (envelope generator) settings determine how the level of the sound changes in time. This lets you reproduce many sound charact...

  • Page 92

    Editing the voice — sound creator cvp-900 92 effect/eq the explanations here apply to step #3 on page 88. Harmony the explanations here apply to step #3 on page 88. The parameters are the same as for harmony/echo display of function. For details, see page 144. Determines the effect type (reverb/ cho...

  • Page 93

    Editing the voice — sound creator 93 cvp-900 organ flutes in addition to the many organ voices in the organ voice category, the cvp-900 has an organ flutes voice. The explanations here apply to step #3 on page 88. ■ parameters organ type this parameter specifies the type of organ tone generation to ...

  • Page 94

    Cvp-900 94 recording your performances and creating songs — song creator with these powerful yet easy-to-use song creating features, you can record your own keyboard performances and store them for future recall. Several different recording methods are available: quick recording (page 95), which let...

  • Page 95

    Recording your performances and creating songs— song creator 95 cvp-900 this is the easiest recording method — perfect for quickly recording and playing back a piano song you’re practicing, so you can check your progress. ■ play back your new song to play back the performance you just recorded, retu...

  • Page 96

    Recording your performances and creating songs— song creator cvp-900 96 this lets you record a song with several different instrument sounds on up to sixteen channels, and create the sound of a full band or orchestra. The structure of the channels and parts are shown in the chart below. About the ac...

  • Page 97

    Recording your performances and creating songs— song creator 97 cvp-900 d c 3 select the part you want to assign to the channel to be recorded. This determines which of the keyboard-played parts (main/layer/left) and the accompaniment style parts (rhythm 1/2, bass, etc.) are recorded to the recordin...

  • Page 98

    Recording your performances and creating songs— song creator cvp-900 98 this method lets you create a song by entering notes one by one, without having to perform them in real time. This is also convenient for recording the chords and the melody separately. Operation recording individual notes — ste...

  • Page 99

    Recording your performances and creating songs— song creator 99 cvp-900 ■ measure/beat/clock ■ velocity the table below shows the available settings and the corresponding velocity values. ■ gate time the following settings are available: normal ....................... 80% tenuto .......................

  • Page 100

    Recording your performances and creating songs— song creator cvp-900 100 recording melodies — step record (note) in this section, we’ll show you how to use step recording by guiding you through this actual music example, shown at right. The operations here apply to step 6 on page 99. ■ play back the...

  • Page 101

    Recording your performances and creating songs— song creator 101 cvp-900 recording chord changes for the auto accompaniment — step record (chord) the chord step recording feature makes it possible to record auto accompaniment chord changes one at a time with precise timing. Since the changes don’t h...

  • Page 102

    Recording your performances and creating songs— song creator cvp-900 102 ■ play back the newly created chord progression use the [c] ( ) button to move the cursor to the beginning of the song, and press the song [start/stop] button to hear the newly entered notes. To actually enter the recorded data...

  • Page 103

    Recording your performances and creating songs— song creator 103 cvp-900 from this display you can set up how recording is started and stopped for either quick recording or multi recording. To call up these settings, select the rec mode display by using the [back][next] button, after performing oper...

  • Page 104

    Recording your performances and creating songs— song creator cvp-900 104 whether you’ve recorded a song using quick recording, multi recording, or step recording, you can use the editing features to change the song data. Editing channel-related parameters — channel calling up the operations here app...

  • Page 105

    Recording your performances and creating songs— song creator 105 cvp-900 delete this lets you delete recorded data in the specified channel. Mix this function lets you mix the data of two channels and place the results in a different channel. It also lets you copy the data from one channel to anothe...

  • Page 106

    Recording your performances and creating songs— song creator cvp-900 106 channel transpose this allows you to transpose the recorded data of individual channels up or down by a maximum of two octaves in semitone increments. Set up you can change the initial settings of the song — such as voice, leve...

  • Page 107

    Recording your performances and creating songs— song creator 107 cvp-900 editing note events — 1 - 16 from this display, you can edit individual note events (see below). Calling up operations here apply to step 4 on page 98. Use the [back] / [next] buttons to call up the display below. Note events p...

  • Page 108

    Recording your performances and creating songs— song creator cvp-900 108 editing chord events — chd from this display, you can edit the chord events you’ve recorded to the song. Calling up operations here apply to step 4 on page 98. Use the [back] / [next] buttons to call up the display below. With ...

  • Page 109

    Recording your performances and creating songs— song creator 109 cvp-900 inputting and editing lyrics this convenient function lets you enter the song name and the lyrics for the song. It also lets you change or correct already existing lyrics. For more information on lyric events, see the chart bel...

  • Page 110

    Cvp-900 110 creating accompaniment styles — style creator this powerful feature lets you create your own original styles, which can then be used for auto accompaniment — just as with the preset styles. About creating accompaniment styles the chart at right shows the basic parts (or “channels”) that ...

  • Page 111

    Creating accompaniment styles — style creator 111 cvp-900 style file format the style file format (sff) combines all of yamaha’s auto accompaniment know-how into a single unified format. By using the edit functions, you can take full advantage of the sff format and freely create your own styles. The...

  • Page 112

    Creating accompaniment styles — style creator cvp-900 112 you can use the realtime recording features to create your own accompaniment style — either from scratch or based on the preset accompaniment data. The operations here apply to step 4 on page 111. Realtime recording — basic a e d c b f j i h ...

  • Page 113

    Creating accompaniment styles — style creator 113 cvp-900 with this method, you can create a style pattern by entering notes and other data individually, without having to perform them in real time. The operations here apply to step 4 on page 111. The actual recording process is the same as in step ...

  • Page 114

    Creating accompaniment styles — style creator cvp-900 114 this convenient function lets you combine accompaniment elements — such as rhythm, bass, and chord patterns — from existing styles, and use them to create your own original accompaniment styles. The operations here apply to step 4 on page 111...

  • Page 115

    Creating accompaniment styles — style creator 115 cvp-900 change the rhythmic feel — groove and dynamics these versatile features give you a wide variety of tools for changing the rhythmic feel of your created accompaniment style. The operations here apply to step 4 on page 111. ■ groove groove para...

  • Page 116

    Creating accompaniment styles — style creator cvp-900 116 ■ dynamics dynamics parameters accent type selects the type of accent. Strength determines how strongly the selected accent type (above) will be applied. The higher the value, the stronger the effect. Expand/compress expands or compresses the...

  • Page 117

    Creating accompaniment styles — style creator 117 cvp-900 editing the channel data in this display, there are five different channel-related edit functions, including quantize, for editing the recorded accompaniment style data. The operations here apply to step 4 on page 111. ■ quantize refer to pag...

  • Page 118

    Creating accompaniment styles — style creator cvp-900 118 making style file format settings —parameter this display provides a variety of style controls— such as determining how the pitch and sound of the recorded style change when playing the chords in the left-hand range of the keyboard. For detai...

  • Page 119

    Creating accompaniment styles — style creator 119 cvp-900 • ntt (note transposition table) this sets the note transposition table for the source pattern. Six transposition types are available. Bypass no transposition. Melody suitable for melody line transposition. Use this for melody channels such a...

  • Page 120

    Cvp-900 120 adjust the volume balance and changing voices — mixing console set up just like a real mixing console, this display gives you comprehensive control over the sound. You can call up additional basic mixing controls by using the [balance] button and the [channel on/off] button (page 62). ■ ...

  • Page 121

    Adjust the volume balance and changing voices — mixing console 121 cvp-900 the operations for this page apply to step 2 of the procedure on page 120. Setting the level balance and voice — volume/voice f j i 1 2 3 4 5 6 7 8 h g sound creator digital recording mixing console balance channel on off par...

  • Page 122

    Adjust the volume balance and changing voices — mixing console cvp-900 122 the operations for this page apply to step 2 of the procedure on page 120. The operations for this page apply to step 2 of the procedure on page 120. Portamento time ............When the part is set to mono (page 59, 90), thi...

  • Page 123

    Adjust the volume balance and changing voices — mixing console 123 cvp-900 the operations for this page apply to step 2 of the procedure on page 120. Adjusting the effects there are three effect sec- tions: reverb, chorus, and dsp (which contains a vari- ety of effect types). These are available ind...

  • Page 124

    Adjust the volume balance and changing voices — mixing console cvp-900 124 effect block block parts characteristics number of user effect reverb 1 (for regular voices) all parts reproduces the warm ambience of playing in a concert hall or jazz club. 3 reverb 2 (for natural voices) all parts except m...

  • Page 125

    Adjust the volume balance and changing voices — mixing console 125 cvp-900 usually an equalizer is used to correct the sound output from amps or speakers to match the special character of the room. The sound is divided into several frequency bands, allowing you to correct the sound by raising or low...

  • Page 126

    Adjust the volume balance and changing voices — mixing console cvp-900 126 effect structure the cvp-900 features the following digital effect systems, which can be applied independently for the natural voices (page 89) and the regular voices (page 89). The effect type, depth, and various parameters ...

  • Page 127

    Adjust the volume balance and changing voices — mixing console 127 cvp-900 for natural voices out rev send main voice dry cho send dsp send rev send layer voice dry cho send dsp send rev send left voice dry cho send dsp send rev send mic dry cho send dsp send rev send dry cho send dsp send chorus 2 ...

  • Page 128

    Cvp-900 128 using a microphone — mic. This extraordinarily powerful feature uses advanced voice-processing technology to automatically produce vocal harmony based on a single lead vocal. Four distinct harmony modes as well as an extensive selection of preset harmony types are provided. In addition t...

  • Page 129

    Using a microphone — mic. 129 cvp-900 vocal harmony parameter list chordal type/vocoder type determines how the harmony notes are applied. Harmony gender type can be set to “off” or “auto”. When “auto”, the gender of the harmony sound is changed automatically. Lead gender type determines whether and...

  • Page 130

    Using a microphone — mic. Cvp-900 130 operation adjusting the vocal harmony settings and microphone effects — overall setting the explanations here apply to step 2 above. ■ 3band eq (3-band equalizer) usually an equalizer is used to correct the sound output from amps or speakers to match the special...

  • Page 131

    Using a microphone — mic. 131 cvp-900 ■ compressor this effect holds down the output when the input signal from the microphone exceeds a specified level. This is useful when recording a signal with widely varying dynamics. It effectively “compresses” the signal, making soft parts louder and loud par...

  • Page 132

    Using a microphone — mic. Cvp-900 132 setting the microphone volume and related effects — talk setting determines the settings when the [talk] button is on. The explanations here apply to step 2 on page 130. Volume/pan/reverb depth/chorus depth/total volume attenuator dsp/type/depth 1 2 3 4 5 6 7 8 ...

  • Page 133

    133 cvp-900 making global and other important settings — function the function mode gives you access to various advanced functions related to the instrument as a whole. These sophisticated functions let you customize the clavinova to your own musical needs and preferences. Adjusting the pitch and tu...

  • Page 134

    Making global and other important settings — function cvp-900 134 making settings for the pedals and keyboard — controller ■ pedal (page 139) these settings determine how the connected pedals (including foot controllers and footswitches) are used. They can be assigned to a variety of functions, lett...

  • Page 135

    Making global and other important settings — function 135 cvp-900 the explanations here apply to step #3 of the procedure on page 133. Tuning the overall pitch — master tune selecting a scale — scale tune fine tuning the pitch/selecting a scale — master tune/scale tune hz (hertz) this unit of measur...

  • Page 136

    Making global and other important settings — function cvp-900 136 scale ■ equal temperament the pitch range of each octave is divided equally into twelve parts, with each half-step evenly spaced in pitch. This is the most commonly used tuning in music today. ■ pure major/pure minor these tunings pre...

  • Page 137

    Making global and other important settings — function 137 cvp-900 the explanations here apply to step #3 of the procedure on page 133. Setting song-related parameters — song settings quick start on some commercially avail- able song data, certain set- tings related to the song (such as voice selecti...

  • Page 138

    Making global and other important settings — function cvp-900 138 the explanations here apply to step #3 of the procedure on page 133. Setting auto accompaniment-related parameters — style setting and split point setting auto accompaniment-related parameters — style setting, split point, and chord f...

  • Page 139

    Making global and other important settings — function 139 cvp-900 setting the fingering method — chord fingering this determines how the notes you play on the keyboard indicate or play the chords of the accompaniment. To learn how to play certain chords, use the convenient chord tutor function (see ...

  • Page 140

    Making global and other important settings — function cvp-900 140 pedal-controllable functions * for best results, use the optional yamaha fc7 foot controller. The parameters below correspond to buttons [2 ▲▼ ] - [8 ▲▼ ] , and their availability depends on the selected control type. For example, if ...

  • Page 141

    Making global and other important settings — function 141 cvp-900 changing the touch sensitivity and transpose — keyboard/panel keyboard touch the touch feature lets you control the volume of the voices by your playing strength. These settings allow you to customize the keyboard’s touch response (se...

  • Page 142

    Making global and other important settings — function cvp-900 142 the explanations here apply to step #3 of the procedure on page 133. Specifying the order for calling up registration memory presets — registration sequence you can save your custom panel settings to the registration memory presets, a...

  • Page 143

    Making global and other important settings — function 143 cvp-900 changing the automatically selected voice settings — voice set when changing voices (selecting a voice file), the settings best matching the voice — the same as those set in the sound creator — are always and automatically called up. ...

  • Page 144

    Making global and other important settings — function cvp-900 144 about the harmony types when a normal harmony type (“standard duet” through “strum”) is selected when “multi assign” is selected multi assign automatically assigns notes played simultaneously on the right-hand section of the keyboard ...

  • Page 145

    Making global and other important settings — function 145 cvp-900 in this section, you can make midi-related settings for the instrument. These settings can be stored all together from the user display, for future recall. For general information and details about midi, see “what is midi?” (page 156)...

  • Page 146

    Making global and other important settings — function cvp-900 146 clock, transmit clock, receive transpose, start/stop ■ clock determines whether the cvp-900 is controlled by its own internal clock or a midi clock signal received from an external device. “internal” is the normal clock setting when t...

  • Page 147

    Making global and other important settings — function 147 cvp-900 receiving midi data — receive midi receive parts setting root note channels — root the note on/off messages received at the channel(s) set to “on” are recognized as the root notes in the accompaniment section. The root notes will be d...

  • Page 148

    Making global and other important settings — function cvp-900 148 the explanations here apply to step #3 of the procedure on page 133. Making settings for fade in/out, metronome, parameter lock, and tap — config 1 fade in time, fade out time, fade out hold time these determine how long it takes for ...

  • Page 149

    Making global and other important settings — function 149 cvp-900 parameter lock this function is used to “lock” the specified parameters so that they can only be changed directly via the panel controls — in other words, instead of via registration memory, one touch setting, music finder, or song an...

  • Page 150

    Making global and other important settings — function cvp-900 150 copying and formatting disks — disk • copying cannot be done between a 2dd disk and 2hd disk. When copying, make sure both disk are the same type. • depending on the amount of data contained in the original source disk, you may have t...

  • Page 151

    Making global and other important settings — function 151 cvp-900 entering your name and language preference — owner restoring the factory-programmed settings of the cvp-900 — system reset this operation lets you restore the cvp-900 to its original factory settings. These settings include system set...

  • Page 152

    Cvp-900 152 using your clavinova with other devices 1 using the headphones (phones jacks). To use headphones, connect them to one of the phones jacks (standard 1/4" phone jacks) located on the under- side of the keyboard. You can also determine whether or not the internal stereo speaker system is sh...

  • Page 153

    Using your clavinova with other devices 153 cvp-900 345 connecting audio & video devices you can connect the clavinova to a wide range of audio equipment by using the aux in and aux out jacks, which are located at the bottom left of the instrument. Connect as shown in the illustrations below using s...

  • Page 154

    Using your clavinova with other devices cvp-900 154 6 using the pedal (footswitch) or foot controller (aux pedal jack) by connecting an optional foot controller (such as the fc7) to the aux pedal jack, you can control any one of a variety of important functions with your foot — such as dynamically a...

  • Page 155

    Using your clavinova with other devices 155 cvp-900 using the to host terminal connect the serial port of the personal computer (rs- 232c terminal or rs-422 terminal) to the to host terminal of the cvp-900. For the connection cable, use the appropriate cable below (sold separately) that matches the ...

  • Page 156

    Using your clavinova with other devices cvp-900 156 using the usb terminal on your computer with a usb/midi interface (ux256/ux96/ ux16, etc.) connect the ux256/ux96/ux16 and the computer with a usb cable. Install the included ux256/ux96/ux16 driver to the computer, and connect the ux256/ux96/ux16 t...

  • Page 157

    Using your clavinova with other devices 157 cvp-900 the “controller” and “tone generator” in the illustration above are equivalent to the piano in our acoustic example. Here, the player’s performance on the keyboard is captured as midi song data (see illustration below). In order to record the audio...

  • Page 158

    Using your clavinova with other devices cvp-900 158 midi channels midi performance data is assigned to one of sixteen midi channels. Using these channels, 1 - 16, the performance data for sixteen different instrument parts can be simultaneously sent over one midi cable. Think of the midi channels as...

  • Page 159

    Using your clavinova with other devices 159 cvp-900 data compatibility this section covers basic information on data compatibility: whether or not other midi devices can playback the data recorded by cvp-900, and whether or not the cvp-900 can playback commercially available song data or song data c...

  • Page 160

    Using your clavinova with other devices cvp-900 160 voice allocation format with midi, voices are assigned to specific numbers, called “program numbers.” the numbering standard (order of voice allocation) is referred to as the “voice allocation format.” voices may not play back as expected unless th...

  • Page 161

    161 cvp-900 keyboard stand assembly caution ■ be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please assemble in accordance with the sequence given below. ■ assembly should be carried out by at least two persons. ■ be sure to use the correct screw size, ...

  • Page 162

    Keyboard stand assembly cvp-900 162 3 insert the pedal cord plug into the pedal connector. Insert the plug so the arrow side faces front (toward the keyboard). If the plug will not go in easily, do not force it. Double-check the orientation of the plug, then try again. 4 attach the cord holder on th...

  • Page 163

    163 cvp-900 troubleshooting problem possible cause and solution • the clavinova does not turn on; there is no power. Make sure that the clavinova has been plugged in properly. Securely insert the female plug into the ac socket on the clavinova, and the male plug into a proper ac outlet (page 17). • ...

  • Page 164

    Troubleshooting cvp-900 164 • auto accompaniment chords are recognized regardless of the split point or where chords are played on the keyboard. This is normal if the fingering mode is set to “full keyboard” or “ai full keyboard.” if either of these is selected, chords are recognized over the entire...

  • Page 165

    Troubleshooting 165 cvp-900 • the sound is distorted or noisy. • the volume may be turned up too high. Make sure all relevant volume settings are appropriate. • this may be caused by the effects. Try canceling all unnecessary effects, especially distortion-type effects (page 123). • some filter reso...

  • Page 166

    Cvp-900 166 specifications : available sound source awm dynamic stereo sampling display 640 ✕ 480 dots backlit graphic lcd keyboard 88 keys (a-1 - c7) voice polyphony (max) 256 voice selection 390 voices + 480 xg voices + 26 drum kits regular voice 343 sweet voice 10 cool voice 6 live voice 17 natur...

  • Page 167

    Specifications 167 cvp-900 * specifications and descriptions in this owner's manual are for information purposes only. Yamaha corp. Reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in ev...

  • Page 168

    Cvp-900 168 index numerics 1 - 16 ................................................................................. 107 [1 ▲▼ ] - [8 ▲▼ ] buttons ........................................... 18, 39–46 3band eq (3-band equalizer) .................................... 130 a [a] - [j] buttons...............

  • Page 169

    Index 169 cvp-900 [dsp] button .......................................................... 18, 58, 126 dynamics ........................................................................... 116 e echo .......................................................................... 59, 143 edit .................

  • Page 170

    Index cvp-900 170 main [d] button ............................................................ 18, 65 main picture .................................................................. 151 maintaining panel settings ................................................. 142 maintenance ........................

  • Page 171

    Index 171 cvp-900 q quantize .......................................................................... 82 quantize .................................................................... 104, 117 quantize size..................................................................... 104 quick recording ......

  • Page 172

    Index cvp-900 172 tempo [ e ] [ e ] buttons ............................................ 18, 51 tempo from ..................................................................... 71 tempo indications — main display .................................... 52 tempo to .........................................

  • Page 173

    Important safety instructions information relating to personal injury, electrical shock, and fire hazard possibilities has been included in this list. Warning - when using any electrical or electronic product, basic precautions should always be followed. These precautions include, but are not limite...

  • Page 174

    * this applies only to products distributed by yamaha corporation of america. (class b) (2 wires) • this applies only to products distributed by yamaha-kemble music (u.K.) ltd. (polarity) • this applies only to products distributed by yamaha canada music ltd. • ceci ne s’applique qu’aux produits dis...

  • Page 175

    For details of products, please contact your nearest yamaha or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. Die einzelheiten zu produkten sind bei ihrer unten...

  • Page 176: Cvp-900

    M.D.G., pro audio & digital musical instrument division, yamaha corporation © 2002 yamaha corporation v954900 ???Ap???.?-0?A0 printed in indonesia clavinova web site (english only) http://www.Yamahaclavinova.Com/ yamaha manual library http://www2.Yamaha.Co.Jp/manual/english/ owner’s manual owner’s m...