Yamaha CRW3200UX Series Owner's Manual - Note
19
Disconnecting the CRW3200UX Drive
The CRW3200UX drive can be connected/disconnected whether the computer
and the drive are turned on or off (hotplug).
However, follow the steps below to disconnect the CRW3200UX drive from the
computer turned on or to turn off the drive connected to the computer.
1
Quit the writing software if it is activated.
2
Be sure to remove any disc from the disc tray.
3
For Windows 98 Second Edition, disconnect the CRW3200UX drive.
For Windows Me/2000 Professional, select Unplug or Eject Hardware on
the task bar and follow the steps on the screen to remove the drive.
For Windows XP, select Safely Remove Hardware on the task bar and
follow the steps on the screen to disconnect the drive.
Be sure not to disconnect the USB cable from the CRW3200UX drive or connect/
disconnect other USB devices from the computer when writing with the drive.
Note
(This screen is an example on Windows Me.)