- DL manuals
- Yamaha
- CD/CDR Drive
- CRW4416E - CRW - CD-RW Drive
- User Manual
Yamaha CRW4416E - CRW - CD-RW Drive User Manual
Summary of CRW4416E - CRW - CD-RW Drive
Page 1
User guide guide de l’utilisateur bedienungsanleitung crw4416e series on/ disc read/ write english français deutsch.
Page 2
Compliance information statement (declaration of conformity procedure) responsible party: yamaha systems technology, inc. Address: 100 century center court san jose, california 95112 telephone: (408) 467-2330 fax: (408) 437-8791 type of equipment: cd recorder model name: crw4416e crw4416e-nb this de...
Page 3
T his output is value measured at a distance 200mm from the objective lens surface on the optical pick-up block. Ansi class : class 1 material : gaalas wavelength : 783-789 nm emission duration : continuous laser output power : less than 44.6 µ w* * laser diode properties class 1 laser product laser...
Page 4: Warning
Warning i warning ❢ warning ❢ • the temperature where crw4416e is located should be between 5ºc and 40ºc (41ºf – 104ºf), when used in a fan-cooled system. • do not disassemble the crw4416e cover to reduce the risk of electric shock. • always remove the disc before transporting crw4416e..
Page 5: Important Precautions
Important precautions ii important precautions please read the following precautions before attempting to operate the crw4416e. • before recording a disc, be sure to clean the disc and tray using an air aerosol-type dust remover. A dust particle on the disc may cause recording to fail, producing an ...
Page 6: Table of Contents
Table of contents iii table of contents introduction ...............................................................................1 crw4416e features .......................................................1 orange book compatible recording ..............................2 chapter 1 - system configu...
Page 7: Introduction
Introduction 1 introduction thank you for purchasing a yamaha crw4416e drive. Please read this manual before using the drive in order to make the best use of the superior crw4416e functions. After reading, please retain this manual for future reference. Crw4416e features ■ 4xs recording (rewritable)...
Page 8: Introduction
Introduction 2 orange book compatible recording track at once in this mode, data can be recorded to disc one track at a time. Discs recorded in this mode cannot be played in cd players or cd- rom drives other than a cd-rw or a cd-r drive until the session is closed. Multisession in this mode, data c...
Page 9: Computer
Chapter 1 - system configuration 3 chapter 1 - system configuration before using the crw4416e, make sure that you have all of the items on the list of included items. In order to use the crw4416e, you will require the following. Computer the following operating environment is required: • an ibm/at c...
Page 10: Tools
Chapter 1 - system configuration 4 tools phillips screwdriver this is used to remove the cover of your computer, and to install the yamaha crw4416e drive. Long nose pliers these are used to insert or remove the jumper pin when setting the master/slave settings of the yamaha crw4416e drive. Discs ■ c...
Page 11: Master/slave Settings
Chapter 2 - installing the yamaha crw4416e drive 5 chapter 2 - installing the yamaha crw4416e drive master/slave settings before you install the crw4416e in your computer, you must make the master/slave setting. This setting is set by inserting a jumper pin in the jumper switch located on the rear p...
Page 12
Chapter 2 - installing the yamaha crw4416e drive 6 setting the crw4416e as the master as shown in the diagram at the right, insert the jumper pin into the right edge of the jumper switch. Note: if only the crw4416e will be connected to the ide interface connector, connect the crw4416e to the end of ...
Page 13: Off
Chapter 2 - installing the yamaha crw4416e drive 7 installing the crw4416e drive the following steps will differ slightly depending on the type of com- puter you are using. For details on removing the cover from your computer, and installing or removing internal devices, refer to the manual for your...
Page 14
Chapter 2 - installing the yamaha crw4416e drive 8 3. Your hands or body may be holding a charge of static elec- tricity. Touch a metallic portion of the chassis or power supply to release any such charge. 4. Remove the front cover of a vacant half-height drive bay. For details refer to the manual o...
Page 15
Chapter 2 - installing the yamaha crw4416e drive 9 6. Connect the ide interface connector. Connect the 40-pin ide interface connector to the ide interface located on the rear panel of the crw4416e drive. Position the connector so that the colored line is at pin 1 (your lower right). 7. Connect the a...
Page 16
Chapter 2 - installing the yamaha crw4416e drive 10 audio cable 8. Connect the power supply cable. Connect the +12v and +5v 4-pin power cable to the power supply interface located on the rear panel of the crw4416e drive. The shape of the connector makes it impossible to reverse the connections. If y...
Page 17
Chapter 2 - installing the yamaha crw4416e drive 11 9. Tighten the four fastening screws securely. 10. Attach the cover of your computer. 11. Connect the power cable to an ac outlet, and switch on your computer. Make sure that the led located on the panel of the crw4416e drive is lit. 12. Start up y...
Page 18: Chapter 3 - Operation
Chapter 3 - operation 12 chapter 3 - operation front panel 1 disc tray the disc is inserted and ejected here. Pressing the eject button will open the tray. 2 headphone jack this stereo mini jack allows you to connect headphones and listen to audio. 3 headphone volume control this control adjusts the...
Page 19: Chapter 3 - Operation
Chapter 3 - operation 13 6 eject button this button is used to open or close the tray. 7 manual eject hole this is used to manually eject a disc that cannot be ejected in the nor- mal way. It is for emergency use only. Loading a disc 1. Press the eject button to open the tray. 2. Carefully place the...
Page 20: Chapter 3 - Operation
Chapter 3 - operation 14 ejecting the disc if the crw4416e is powered on: press the eject button to eject the disc. Note: you cannot eject the disc if the atapi command prohibits the eject operation while the crw4416e is reading data. Caution: be sure to remove the disc after it is completely ejecte...
Page 21: Chapter 3 - Operation
Chapter 3 - operation 15 manual eject (emergency use) here we explain how to eject the disc when it cannot be ejected in the normal way; for example, the power is shut off inadvertently or the loading mechanism fails. This technique should be used only as a last resort. Frequent use may lead to malf...
Page 22: Troubleshooting
Troubleshooting 16 troubleshooting if crw4416e is not performing as expected, look up the symptoms in the following table, and take the appropriate corrective action. Caution: applying physical shock or vibration to the crw4416e while a cd-r disc or cd-rw disc is being written may produce writing er...
Page 23: Appendix
Appendix 17 appendix specifications specifications are subject to change without prior notice. Interface atapi (e-ide) data capacity 650mb (74 minutes disc) 550mb (63 minutes disc) record/read speed writing (cd-rw): 2x speed, 4x speed (when 4x compatible discs are used) writing (cd-r): 1x speed (rea...
Page 24: Appendix
Appendix 18 front panel indicator key ● on: green flashing: green — off ❍ on: orange flashing: orange status on/disc read/write reset ❍ ➠ — ❍ ➠ — ready (no disc) ❍ — inserting disc ➠ — ejecting disc — ready (disc inserted) ● — seeking ● preparing to write ● writing ● ❍ writing (test mode) ● playback...
Page 25: Japan
English: if you have any questions, please contact your dealer or one of the following companies. French: pour plus de détails sur les produits, veuillez vous adresser à yamaha ou au distributeur le plus proche figurant dans la liste suivante : german: bei weiteren fragen wenden sie sich sitte an ih...