Yamaha CRW4416S - CRW - CD-RW Drive User Manual
Summary of CRW4416S - CRW - CD-RW Drive
Page 1
User guide guide de l’utilisateur bedienungsanleitung crw4416s series on/ disc read/ write english français deutsch.
Page 2
Compliance information statement (declaration of conformity procedure) responsible party: yamaha systems technology, inc. Address: 100 century center court san jose, california 95112 telephone: (408) 467-2330 fax: (408) 437-8791 type of equipment: cd recorder model name: crw4416s crw4416s-nb this de...
Page 3
T his output is value measured at a distance 200mm from the objective lens surface on the optical pick-up block. Ansi class : class 1 material : gaalas wavelength : 783-789 nm emission duration : continuous laser output power : less than 44.6 µ w* * laser diode properties class 1 laser product laser...
Page 4: Warning
Warning i warning ❢ warning ❢ • the temperature where crw4416s is located should be between 5ºc and 40ºc (41ºf – 104ºf), when used in a fan-cooled system. • do not disassemble the crw4416s cover to reduce the risk of electric shock. • always remove the disc before transporting crw4416s..
Page 5: Important Precautions
Important precautions ii important precautions please read the following precautions before attempting to operate the crw4416s. • before recording a disc, be sure to clean the disc and tray using an air aerosol-type dust remover. A dust particle on the disc may cause recording to fail, producing an ...
Page 6: Table of Contents
Table of contents iii table of contents introduction ...............................................................................1 crw4416s features .......................................................1 orange book compatible recording ..............................2 chapter 1 - system configu...
Page 7: Introduction
Introduction 1 introduction thank you for purchasing a yamaha crw4416s drive. Please read this manual before using the drive in order to make the best use of the superior crw4416s functions. After reading, please retain this manual for future reference. Crw4416s features ■ 4xs recording (rewritable)...
Page 8: Introduction
Introduction 2 orange book compatible recording track at once in this mode, data can be recorded to disc one track at a time. Discs recorded in this mode cannot be played in cd players or cd- rom drives other than a cd-rw or a cd-r drive until the session is closed. Multisession in this mode, data c...
Page 9: Computer
Chapter 1 - system configuration 3 chapter 1 - system configuration before using the crw4416s, make sure that you have all of the items on the list of included items. In order to use the crw4416s, you will require the following. Computer the following operating environment is required: • an ibm/at c...
Page 10: Tools
Chapter 1 - system configuration 4 tools phillips screwdriver this is used to remove the cover of your computer, and to install the yamaha crw4416s drive. Long nose pliers these are used to insert or remove the jumper pin when setting the scsi id and parity settings etc.Of the yamaha crw4416s drive....
Page 11: Crw4416S Drive Settings
Chapter 2 - installing the yamaha crw4416s drive 5 chapter 2 - installing the yamaha crw4416s drive crw4416s drive settings before installing the crw4416s in your computer, you will need to set the following jumpers. • scsi id settings • parity setting • terminator setting • block size setting this ...
Page 12
Chapter 2 - installing the yamaha crw4416s drive 6 note: when you are using windows 95 or windows 98, and if the scsi id set- ting on the rear panel is the same as the number assigned to another scsi device, the plug and play component of windows 95 or windows 98 will automatically assign an unused ...
Page 13
Chapter 2 - installing the yamaha crw4416s drive 7 ■ terminator setting the terminator setting indicates whether or not this device is the last connected scsi device. Terminator on (with a jumper) — use this setting if the crw4416s is the last device in the internal scsi daisy-chain. Terminator off ...
Page 14: Off
Chapter 2 - installing the yamaha crw4416s drive 8 installing the crw4416s drive the following steps will differ slightly depending on the type of com- puter you are using. For details on removing the cover from your computer, and installing or removing internal devices, refer to the manual for your...
Page 15
Chapter 2 - installing the yamaha crw4416s drive 9 3. Your hands or body may be holding a charge of static elec- tricity. Touch a metallic portion of the chassis or power sup- ply to release any such charge. 4. Remove the front cover of a vacant half-height drive bay. For details refer to the manual...
Page 16
Chapter 2 - installing the yamaha crw4416s drive 10 7. Connect the scsi flat cable. Connect the 50-pin scsi flat cable to the scsi card and to the scsi interface located on the rear panel of the crw4416s drive. Position the connector so that the colored line is at pin 1 (your lower right). 8. Connec...
Page 17
Chapter 2 - installing the yamaha crw4416s drive 11 audio cable 9. Connect the power supply cable. Connect the +12v and +5v 4-pin power cable to the power supply interface located on the rear panel of the crw4416s drive. The shape of the connector makes it impossible to reverse the connec- tions. If...
Page 18
Chapter 2 - installing the yamaha crw4416s drive 12 10. Tighten the four fastening screws securely. 11. Attach the cover of your computer. 12. Connect the power cable to an ac outlet, and switch on your computer. Make sure that the led located on the panel of the crw4416s drive is lit. 13. Start up ...
Page 19: Chapter 3 - Operation
Chapter 3 - operation 13 chapter 3 - operation front panel 1 disc tray the disc is inserted and ejected here. Pressing the eject button will open the tray. 2 headphone jack this stereo mini jack allows you to connect headphones and listen to audio. 3 headphone volume control this control adjusts the...
Page 20: Chapter 3 - Operation
Chapter 3 - operation 14 6 eject button this button is used to open or close the tray. 7 manual eject hole this is used to manually eject a disc that cannot be ejected in the nor- mal way. It is for emergency use only. Loading a disc 1. Press the eject button to open the tray. 2. Carefully place the...
Page 21: Chapter 3 - Operation
Chapter 3 - operation 15 ejecting the disc if the crw4416s is powered on: press the eject button to eject the disc. Note: you cannot eject the disc if the scsi command prohibits the eject oper- ation while the crw4416s is reading data. Caution: be sure to remove the disc after it is completely eject...
Page 22: Chapter 3 - Operation
Chapter 3 - operation 16 manual eject (emergency use) here we explain how to eject the disc when it cannot be ejected in the normal way; for example, the power is shut off inadvertently or the loading mechanism fails. This technique should be used only as a last resort. Frequent use may lead to malf...
Page 23: Troubleshooting
Troubleshooting 17 troubleshooting if crw4416s is not performing as expected, look up the symptoms in the following table, and take the appropriate corrective action. Caution: applying physical shock or vibration to the crw4416s while a cd-r disc or cd-rw disc is being written may produce writing er...
Page 24: Appendix
Appendix 18 appendix specifications interface scsi 2 data capacity 650mb (74 minutes disc) 550mb (63 minutes disc) record/read speed writing (cd-rw): 2x speed, 4x speed (when 4x compatible discs are used) writing (cd-r): 1x speed (real-time), 2x speed, 4x speed playback: 9 - 16x speed [max] (partial...
Page 25: Appendix
Appendix 19 specifications are subject to change without prior notice. Front panel indicator key ● on: green flashing: green — off ❍ on: orange flashing: orange status on/disc read/write reset ❍ ➠ — ❍ ➠ — ready (no disc) ❍ — inserting disc ➠ — ejecting disc — ready (disc inserted) ● — seeking ● prep...
Page 26: Japan
English: if you have any questions, please contact your dealer or one of the following companies. French: pour plus de détails sur les produits, veuillez vous adresser à yamaha ou au distributeur le plus proche figurant dans la liste suivante : german: bei weiteren fragen wenden sie sich sitte an ih...