1. DL manuals
  2. Yamaha
  3. Conference System
  4. CS-700
  5. Operation Manual

Yamaha CS-700 Operation Manual

Manual is about: video sound collaboration system for huddle rooms

Summary of CS-700

  • Page 1

    1 video sound collaboration system for huddle rooms operations guide always update the firmware to the latest version. Please refer to the user’s manual that provides detailed information on how to use the product. You can download the latest firmware and user’s manual from the following website: ht...

  • Page 2

    2 © 2017 revolabs, inc. All rights reserved. No part of this document may be reproduced in any form or by any means without express written permission from revolabs, inc. Product specifications are subject to change without notice. Y a m a h a c s - 7 0 0 i n s t a l l a t i o n a n d o p e r a t i ...

  • Page 3: Online Resources

    3 online resources resource website revolabs www.Revolabs.Com yamaha cs 700 www.Revolabs.Com/cs700 customer support www.Revolabs.Com/support.

  • Page 4: Contents

    4 contents online resources ............................................................................................ 3 contents ......................................................................................................... 4 introduction ..................................................

  • Page 5

    5 using the service application .................................................................. 42 basic operations ........................................................................................... 54 usb connected video conferencing – byod (bring your own device) ........ 54 usb connec...

  • Page 6

    6 troubleshooting ......................................................................................... 99 reboot ..................................................................................................... 99 restore factory defaults .......................................................

  • Page 7: Introduction

    7 introduction thank you for choosing the yamaha cs-700 video sound collaboration system. This video sound collaboration system allows you to provision your huddle room or small multipurpose conference room for all forms of multimedia unified communications using popular video collaboration applicat...

  • Page 8: Getting Started

    8 getting started content and component overview depending on the system you have purchased, you will find the following content in the box: cs-700av, cs-700sp cs-700dl, cs-700ds cs-700 sound/camera unit cs-700 sound/camera unit wall mounting bracket wall mounting bracket region specific power cord ...

  • Page 9

    9 volume control & mute the speaker volume can be increased or decreased using the volume up and volume down buttons. The microphones are muted using the mute button. The mute/unmute button is only functional when microphones are activated. The microphone mute button provides a colored indication of...

  • Page 10

    10 bluetooth pairing bluetooth led color bluetooth enabled, no connection white bluetooth initializing slow flash white system software update in process fast flash white bluetooth connecting slow flash blue bluetooth pairing in process fast flash blue bluetooth enabled, active connection solid blue...

  • Page 11: Installing The System

    11 installing the system the cs-700 unit is designed to be mounted to the huddle-room wall using the bracket included with the unit. The recommended mounting location is directly adjacent to the display unit, typically just below it, with an optimal distance above the conference room table of 10-18 ...

  • Page 12

    12 placing the cs-700 unit on the bracket position the cs-700 in such a way that the two hooks in the front of the bracket fit into the cavities on the lower part of the cs-700. Ensure that the cs-700 is safely held by the hooks. Connecting the cs-700 once the cs-700 is safely positioned on the hook...

  • Page 13

    13 installing unit in bracket once all cables are correctly connected and secured, tilt the cs-700 back on the bracket and push it pack into the bracket. Secure unit secure the cs-700 unit in the bracket with the provided machine screws..

  • Page 14: Setting Up The System

    14 setting up the system all connectors can be found on the back of the main cs-700 unit. Connecting the power connect one end of the power supply cable into the power connector on the cs-700 back panel. Connect the other end of the power supply into your country-specific power extension cable, and ...

  • Page 15

    15 connecting to a computer – usb 3.0 using the included usb 3.0 cable, connect the usb type-b side of the cable into the port identified by the icon on the back of the cs-700 unit. Connect the other end of the cable to the usb 3.0 port on the computer running the third party softphone, webinar, or ...

  • Page 16

    16 in your unified communications application, select the cs-700 as the video device. Connecting to an ip network for system management note, the cs-700 does not require network management in order to operate. The plug-and-play nature of the usb connection is sufficient to enable cs-700 to function....

  • Page 17

    17 connected pc via usb cable, operating the “service application”. The service application will provide a method of identifying the current ip and mac addresses of the cs-700 unit. The service application is used by system administrators. Interrogation of dhcp server leased ip address list, and ass...

  • Page 18

    18 detents within the camera mechanism will lock the camera into position. You will hear clicking sounds as the detents engage. Procedure for camera angle adjustment 1. Connect a pc through the cs-700 usb cable, and enable uc software, a local pc camera application, or the service application. 2. En...

  • Page 19: User Interface

    19 user interface cs-700 the cs-700 unit provides volume up, volume down, audio mute, camera mute, camera shutter, bluetooth pairing and bluetooth nfc controls and indicators on the front of the unit. Volume up/down buttons affect the sound power from the cs-700, with corresponding increasingly or d...

  • Page 20

    20 when accessing the cs-700 web-ui webserver, the login page will be displayed. A password is required to log in to the device. Unless the password was previously changed, the factory default password is 7386. Generally, after a time-out period the user will be automatically logged-out of the web i...

  • Page 21

    21 the home screen allows initiating an immediate restart of the device, by clicking on the restart device box. In all screens of the web ui, a logout icon is displayed in the upper right corner allowing the user to log off from the unit. The top menu line allows accessing the different pages of the...

  • Page 22

    22 please note that for any changes to take effect, the “submit” button on the web page has to be clicked. Otherwise changes will get lost when leaving the page without clicking “submit” before. Settings admin the admin tab allows setting of several administrative parameters. Security settings the s...

  • Page 23

    23 when “require https” is enabled, the web interface will switch from http to https. Please note that when using https, the cs-700 device does not have a certified security certificate and the web browser will warn of a potentially unsecure connection. “enable telnet access” allows the telnet inter...

  • Page 24

    24 the system will go into power savings mode. This feature is set by factory default with a 20 minute power savings time. The cs-700 will wake up when activity is detected, either on the aux in, the usb connection, or a button is pressed. Please allow about 10 seconds for the system to wake up. Whe...

  • Page 25

    25 snmp settings the cs-700 will report snmp mib events (traps) and provide status updates to snmp polls when this feature is enabled with the enable snmp box. Provide the snmp server ip address to complete the process. See the appendix for details on the snmp mib and traps supported. Deployment ser...

  • Page 26

    26 audio the audio section of the settings menu supports managing the audio behavior of the cs-700. The equalizer setting allows selecting one of a list of pre-defined speaker equalizations. The available choices are voice enhance, bass boost, and treble boost. The high pass filter affects the micro...

  • Page 27

    27 bluetooth settings the “enable bluetooth” box allows system-wide control of all bluetooth capability. De-selecting this box will shut-down bluetooth communications to the cs-700 and disable the bluetooth and nfc front-panel indicator buttons. System defaults to bluetooth-enabled. The “enable nfc”...

  • Page 28

    28 camera settings the web-ui provides information on the current pan, tilt, and zoom (ptz) settings of the camera. It does not allow to change these settings. Ptz settings can be changed using the service application described later in the document, or using uc applications that offer camera contro...

  • Page 29

    29 network the network section allows specifying the ip configuration for the cs-700. Factory default, the device is set to dhcp enabled and no further ip settings are required. However, if a static ip address is to be assigned, “enable dhcp” needs to be unchecked, and the static ip parameters can b...

  • Page 30

    30 authentication settings authentication settings provides the option to enable 802.1x authentication on the cs-700. To enable 802.1x authentication, check the enable 802.1x authentication setting. Supported authentication types are md5 and protected eap (protected extensible authentication protoco...

  • Page 31

    31 region in the regions menu, the time zone setting allows selection of the time zone the cs-700 is being used in, managing date and time reported in network management and logging. Factory default is gmt. Time settings.

  • Page 32

    32 in the time settings section the date format used can be selected. Date can be set as mm/dd/yyyy, dd/mm/yyyy, or yyyy/mm/dd. The time display can be changed between 24 hour format and 12 hour format. Factory default is mm/dd/yyyy and 12 hour format. The cs-700 supports up to 4 network time server...

  • Page 33

    33 tools the tools section of the management interface allows importing and exporting data, resetting the configuration, upgrading the firmware version, and downloading log files. Update update allows upgrading the device firmware of the cs-700 using an image bundle on your local pc. Only valid firm...

  • Page 34

    34 configuration the configuration page allows exporting and re-importing the current configuration of the cs-700. This is specifically of interest if several cs-700 devices are to share identical configurations. The first cs-700 can be fully configured and exported as a “golden reference” configura...

  • Page 35

    35 logs the logs section allows downloading logging information from the cs-700 for analysis. By factory default, verbose logging is not enabled and not required. Access to logging information is typically only required when environmental issues with connected usb devices are experienced, and usuall...

  • Page 36: Service Application

    36 service application the cs-700 device can also be configured and managed through a pc connected via usb using a software client called the “service application”. The service application enables the locally attached computer to gain access to the cs-700 configuration and operating parameters over ...

  • Page 37

    37 next the installer requires the path where the application shall be installed. Please accept the path, or provide the location where the application shall be installed. On the next screen select if a desktop shortcut is required:.

  • Page 38

    38.

  • Page 39

    39 finally, please confirm the selections and start the installation process..

  • Page 40

    40 the service application requires an additional device driver for the usb interface which requires confirmation: finally, a window with help information is provided..

  • Page 41

    41 and lastly, the installation process provided a success message after a successful installation..

  • Page 42

    42 using the service application the service application supports similar functionality to the web user interface. However, in some areas it supports less, e.G. In network management, while in others it supports more, e.G. In video control. See the following sections for the supported functionality ...

  • Page 43

    43 once the application logged into the cs-700 device, the home tab will show status information of the unit..

  • Page 44

    44 admin the admin area under the settings menu allows setting system parameters. To change the password provide a new one of at least 4 digits lengths. Other characters are not allowed in the password. Once a valid password has been entered, it needs to be entered a second time to protect against t...

  • Page 45

    45 controlled through the enable power saving mode checkbox. When the power savings setting is enabled, the user can select the time (in minutes) after which the system will go into power savings mode. This feature is set by factory default with a 20 minute power savings time. The cs-700 will wake u...

  • Page 46

    46 the equalizer setting allows selecting one of a list of pre-defined speaker equalizations. The available choices are voice enhance, bass boost, and treble boost. The high pass filter affects the microphones and can be used to filter out low frequency noises in the room. The high pass filter can b...

  • Page 47

    47 bluetooth in the bluetooth menu settings affecting the bluetooth connectivity can be adjusted. The “enable bluetooth” box allows system-wide control of all bluetooth capability. De-selecting this box will shut-down bluetooth communications to the cs-700 and disable the bluetooth and nfc front-pan...

  • Page 48

    48 time, pairing mode or the connecting mode will terminate. A value of 0 indicates no timeout. The default value is 60 sec. The “enable nfc” box allows control over the nfc pairing feature. De-selecting this box will disable the nfc pairing feature associated with the nfc front- panel indicator but...

  • Page 49

    49.

  • Page 50

    50 network the network section allows specifying the ip configuration for the cs-700. Factory default, the device is set to dhcp enabled and no further ip settings are required. However, if a static ip address is to be assigned, “enable dhcp” needs to be unchecked, and the static ip parameters can b...

  • Page 51

    51 update the update section allows updating the firmware of the yamaha cs-700. After clicking on “select firmware” browse to the location where the firmware file is being stored and select it. Uploading the firmware file using usb will take several minutes, a progress indicator is shown on the bott...

  • Page 52

    52 configuration the configuration tab allows exporting and importing configuration information of the cs-700. This is specifically of interest if several cs-700 devices are to share identical configurations. The first cs-700 can be fully configured and exported as a “golden reference” configuration...

  • Page 53

    53 logs the logs section allows downloading logging information from the cs-700 for analysis. Access to logging information is typically only required when environmental issues with connected usb devices are experienced, and usually are shared with yamaha customer support..

  • Page 54: Basic Operations

    54 basic operations usb connected video conferencing – byod (bring your own device) 1. To use the cs-700 with popular unified communications (uc) software, connect your computer to the cs-700 main usb cable using a usb 3.0 compatible port, and select the yamaha cs-700 audio device and yamaha cs-700 ...

  • Page 55: Aux-In Audio Support

    55 bluetooth pairing and activation press the bluetooth button on the cs-700 front panel and hold until it flashes blue, indicating that pairing mode has begun. Once in pairing mode, accept the pairing request from “yamaha cs-700 ” (or the name assigned by the system administrator) as indicated on y...

  • Page 56: Configuring The Cs-700

    56 configuring the cs-700 this section will provide details on how to configure the cs-700 device. The information provided here is general and provides the details of how to access the configuration settings on the cs-700 and to enter in specific information. There are three methods to configure th...

  • Page 57

    57 http:// an ftp server needs to be configured as ftp:///user=””&pass=”” where and are the username and password required to access the tftp server. Once the cs-700 receives the address information of that server, it tries to access configuration files on that server to auto-configure the device du...

  • Page 58: Provisioning File

    58 any configuration data provided from the configuration files will overwrite configuration that might have been entered in the phone previously. Provisioning file the provisioning file is in xml format. The syntax of the file is [] [{firmware file name}] where [] indicates an optional parameter an...

  • Page 59

    59 filename: department.Xml net.Ntp1="0.Pool.Ntp.Org" net.Ntp2="1.Pool.Ntp.Org" sys.Provisioning-interval="1440" sys.Dst-enabled="1" sys.Dst-start-rules="3:2:1:2" sys.Dst-end-rules="11:1:1:2" sys.Time-zone="6" sys.Twenty-four-hour-time="0" sys.Date-format="mm/dd/yyyy" /> provisioning file parameters...

  • Page 60

    60 property type values default value description sys.Systemname text system name string. Default value is the product name concatenated with the mac address product name and mac address specifies the system name. Sys.Md5-password text password string. 7386 administrator password for the device, sto...

  • Page 61

    61 property type values default value description sys.Region indexed_ option 1 : argentina 2 : australia 3 : belgium 4 : brazil 5 : canada 6 : chile 7 : china 8 : costa rica 9 : france 10 : germany 11 : hong kong 12 : india 13 : israel 14 : italy 15 : japan 16 : malaysia 17 : mexico 18 : new zealand...

  • Page 62

    62 property type values default value description sys.Time-zone indexed_ option 0 : -11:00 american samoa 1 : -10:00 hawaii 2 : -9:00 alaska 3 : -8:00 pacific time 4 : -7:00 mountain time 5 : -6:00 central time 6 : -5:00 eastern time 7 : -4:30 caracas 8 : -4:00 atlantic time 9 : -3:30 newfoundland 1...

  • Page 63

    63 property type values default value description sys.Power-saving- mode boolean 0 : power save mode is off (default) 1 : power save mode is on 0 configure power saving mode setting, 0 - off, 1 - on. Default is off. Sys.Power-saving- time number timeout : power save timeout in minutes 20 configure p...

  • Page 64

    64 property type values default value description audio.High-pass- filter indexed_ option 0 : none (default) 1 : 110 hz 2 : 140 hz 3 : 175 hz 4 : 225 hz 0 high-pass filter setting. High-pass filters are provided to adjust to room and application requirements. Use the high-pass filter in rooms that h...

  • Page 65

    65 property type values default value description ble.Ble-pair- timeout number 0 : no timeout 1-120 : pairing timeout in seconds 60 ble pairing timeout in seconds. After this time, the pairing mode will stop. A value of 0 indicates no timeout. Default is 60 seconds. Net.Ip-addr text ip-address : ip ...

  • Page 66

    66 property type values default value description net.Dot1x-enabled boolean 0 : disable 802.1x authentication 1 : enable 802.1x authentication 0 enables 802.1x authentication to access the network. When enabled, the 802.1x authentication type and the required credentials also need to be specified. M...

  • Page 67

    67 property type values default value description voip.Reg-use-proxy indexed_ option 0 : no proxy 1 : outbound only 2 : acc only 3 : all 0 indicates whether the sip proxy server(s) specified in "proxy" property should be used when registering. Selecting this option will add the listed proxy server(s...

  • Page 68

    68 property type values default value description voip.Use-100rel boolean 0 : disable reliable provisional responses 1 : enable reliable provisional responses 0 implements reliable sip provisional responses. By default the setting is 0. Sip is a request-response type of protocol with two types of re...

  • Page 69

    69 property type values default value description voip.Use-srtp indexed_ option 0 : disabled -- do not use srtp; always use rtp 1 : optional -- use the optional disposition for srtp in sdp; if the remote end supports srtp then use srtp; otherwise use rtp 2 : mandatory -- force use of srtp; if the re...

  • Page 70

    70 property type values default value description voip.Min-size boolean 0 : do no use compact format 1 : use compact format. 0 use compact sip message format. The sip protocol specifies that header field names can be in the full name form or in the abbreviated form. Abbreviated form is useful when m...

  • Page 71

    71 property type values default value description voip.Ice-regular boolean 0 : regular nomination method 1 : aggressive nomination method 1 ice nomination method. When using ice, select the preferred ice nomination method. To validate candidate pairs (ip addresses and ports for the local and remote ...

  • Page 72

    72 property type values default value description voip.Turn-srv text address : string. The format is either 'domain:port' or 'host:port'. Turn server domain name or hostname, and port. The format is either 'domain:port' or 'host:port' voip.Turn-user text user name. Username to authenticate against t...

  • Page 73

    73 property type values default value description voip.Codec5 indexed_ option 0 : none 1 : g.722 2 : g.711 u-law (pcmu) 3 : g.711 a-law (pcma) 4 : g.726 5 : g.729 5 lowest prioritized codec. At least one codec different from “none” has to be selected in voip.Codec1-voip.Codec5. Voip.Quality number 0...

  • Page 74

    74 property type values default value description voip.Always- forwarding boolean 0 : disable 1 : enable 0 enable or disable forwarding all incoming voip calls to the specified number. Voip.Always- forwarding-num text voip dialing number. Forward all incoming voip calls to the specified number. Voip...

  • Page 75

    75 using the application programming interface (api) the yamaha cs-700 provides an interface to integrate into third party applications to control and manage the unit directly without the use of yamaha’s management interfaces. The api allows accessing the cs-700 unit either over an usb connection or...

  • Page 76

    76 return values: value description -1 general error 0 success 1 no device connected 2 failed authentication event types: type description 0xff device disconnected devdetach description: disconnect session. Syntax: export void __stdcall devdetach(void); return values: value description -1 general er...

  • Page 77

    77 coreclicmd description: send a cli-format command to the device. Commands are listed in the section “usb/telnet cli commands”. Syntax: export int __stdcall coreclicmd(char *cmd, char* rsp, int len); parameters: parameter description cmd cli command string (see api command reference) rsp pointer t...

  • Page 78

    78 telnet / ip interface to use an ip connection for the control, with the cs-700 being the server, the “enable telnet access” check box on the admin settings page of the web ui has to be checked. Start the telnet connection by connecting to the ip address of the cs-700 unit, providing the standard ...

  • Page 79

    79 a range of values is separated by an ellipsis. [ ] square brackets designate optional parameters. [ ]+ a list of repeating values is designated by a plus sign. For properties, the description lists the actions that can be performed on the property, including: get – property can be read; this is t...

  • Page 80

    80 command definition: action definition get get speaker-volume response val speaker-volume set set speaker-volume notify notify audio.Speaker-volume parameters: parameter description 1-18 volume setting default value is 12 format examples: get speaker-volume val speaker-volume 12 set speaker-volume...

  • Page 81

    81 mute description: mute microphones. Property actions: set, get, notify command definition: action definition get get mute response val mute set set mute notify notify audio.Mute parameters: parameter description 0 unmute mics 1 mute mics format examples: get mute val mute 0 set mute 0 notify audi...

  • Page 82

    82 cli format examples: get camera-backlight-comp val camera-backlight-comp 1 set camera-backlight-comp 1 notify camera.Camera-backlight-comp 1 supported products: cs700-av, cs700-sp, cs700-dl, cs700-ds camera-door description: query state of camera door. Property actions: get, notify command defini...

  • Page 83

    83 parameters: parameter description 0 camera video is not muted 1 camera video is muted format examples: get camera-mute val camera-mute 0 set camera-mute 0 notify camera.Camera-mute 0 supported products: cs700-av, cs700-sp, cs700-dl, cs700-ds camera-pan description: camera's digital pan setting. C...

  • Page 84

    84 command definition: action definition get get camera-tilt response val camera-tilt set set camera-tilt notify notify camera.Camera-tilt parameters: parameter description -18 - 18 tilt setting default value is 0 format examples: get camera-tilt val camera-tilt 0 set camera-tilt 0 notify camera.Cam...

  • Page 85

    85 cam-apply-defaults description: apply the camera's default ptz settings. These settings are also automatically applied when the device detects that the upstream usb connection has been established, either at startup or after a usb disconnection. Command definition: action definition execute cam-a...

  • Page 86

    86 disconnected not in a call or phone is not registered. Update the call is transferred by the far end (with some call managers the call state will remain “connected” after the transfer). Missed incoming voip call missed due to do-not-disturb. Usb calls active usb audio is active. Incoming incoming...

  • Page 87

    87 dial description: dial a voip call using the given number. Command definition: action definition execute dial parameters: parameter description voip-line-id 1 voip line 1 voip-line-id 2 voip line 2 voip-line-id 3 voip line 3 (used for transfer) number voip number to dial format examples: dial 1 7...

  • Page 88

    88 parameters: parameter description voip-line-id 1 voip line 1 voip-line-id 2 voip line 2 voip-line-id 3 voip line 3 (used for transfer) format examples: hangup 1 supported products: cs700-av, cs700-sp, cs700-dl, cs700-ds hold description: hold the given call. Command definition: action definition ...

  • Page 89

    89 voip-line-id 3 voip line 3 (used for transfer) usb usb call/audio bt bt call all all active calls format examples: resume 1 supported products: cs700-av, cs700-sp, cs700-dl, cs700-ds swap description: swap the source call with the target call, used for swapping held calls. Command definition: act...

  • Page 90

    90 transfer description: transfer the source call to target call, used for acknowledged transfer. Command definition: action definition execute transfer parameters: parameter description source-line-id line id of call being transferred target-line-id line id of call to which the source will be trans...

  • Page 91

    91 dtmf description: send dtmf number or digit string on given voip line. This is not to dial a number, but to send dtmf tones during an active call. Command definition: action definition set set dtmf parameters: parameter description voip-line-id 1 voip line 1 voip-line-id 2 voip line 2 voip-line-i...

  • Page 92: Through The Web Ui

    92 upgrading the device firmware from time to time, new device firmware might be made available to upgrade the functionality and feature set of the cs-700 device. Download such software from https://www.Revolabs.Com/products/cs-700/download . The software is packaged as a bundle file which is applie...

  • Page 93: Appendix

    93 appendix session control functionality details per third party application using windows computers audio volume and mute is integrated with the operating system. Volume changes in the operating system and the cs-700 device are communicated and reflected on both sides. Audio integration is not dir...

  • Page 94: Snmp Support Details

    94 snmp support details the cs-700 includes an snmp agent that can be configured to provide snmp support. The table below describes the snmp configuration settings that the cs-700 administrator must configure to enable snmp. Snmp-enable enable or disable snmp support. Disabled (0) means that snmp is...

  • Page 95

    95 snmp mib for the cs-700 cs700-mib definitions ::= begin imports object-type, notification-type, module-identity, enterprises from snmpv2-smi object-group from snmpv2-conf displaystring from snmpv2-tc ; yamahaagentmib module-identity last-updated "201710010000z" organization "www.Revolabs.Com" con...

  • Page 96

    96 "base version of type string." ::= {cs700 12} usbconnection object-type syntax displaystring max-access read-only status current description "usb connection active (0,1) of type string." ::= {cs700 13} usbmicstream object-type syntax displaystring max-access read-only status current description "...

  • Page 97

    97 usbconntraphit notification-type objects { usbconntrap } status current description "generated when usb connection state changes" ::= { cs700traps 1 } dialerbatttrap object-type syntax displaystring max-access accessible-for-notify status current description "dialer battery trap data" ::= { cs700...

  • Page 98

    98 optimize windows for cs-700 audio to configure the cs-700 device as the default device and to improve audio follow this one-time setup procedure: 1. Right click on the speaker icon in the lower right hand corner of the windows taskbar. 2. Select sounds from the menu. 3. Click the playback tab. 4....

  • Page 99: Troubleshooting

    99 troubleshooting reboot from the web ui, click on the “restart device” button on the home page and confirm the selection to reboot the system. Or from the service application, select “restart system” in the configuration menu. Removing the cs-700 device from power by disconnecting the power connec...

  • Page 100

    100 if access issues continue, reboot the unit and re-verify that a valid ip address is assigned by the network following several minutes of boot-up using the method described above. Lost password if the web-ui and service application password has been changed from factory default (7386), and the ne...

  • Page 101

    101 connection, with greatest impact being degraded video quality, either with a resolution down-grade below hd, or through video artifacts and freezes during network service interruptions. Optimize camera settings. Assuming video degradation is not resolution or bandwidth related, various other cam...

  • Page 102: Technical Specifications

    102 technical specifications power adapter model number adp-38dr a bluetooth specifications bluetooth specification version 2.1 + edr supported profiles hfp (1.6), a2dp supported codecs sbc, msbc, cvsd wireless output class 2 maximum communication distance 10 m radio frequency (operational frequency...

  • Page 103: Date Code

    103 supervised), forwarding, do not disturb, redial, call timer, call id, speed dial, missed call notifications, voice mail notifications (call manager configured) call bridging supports bridging sip and usb calls. Join, split, hold, resume, 2+1+1 lines: up to 2 sip calls, 1 usb call, 1 bluetooth® c...

  • Page 104

    104 8 2018 9 2019 0 2020 1 2021 the second and third digits indicate the calendar week in that year – from 01 at the beginning of the year to 52 (or 53)..

  • Page 105: Limited Warranty

    105 limited warranty and limitation of liability limited warranty revolabs warrants to the end user (“customer”) that this product will be free from significant defects in workmanship and materials, under normal use and service, for one year from the date of purchase from revolabs or its authorized ...

  • Page 106: Exclusions and Remedies

    106 revolabs product repair policy. The sole exceptions to the terms of this warranty are those listed as part of the revolabs doa replacement policy. Exclusions and remedies revolabs will not be liable under this limited warranty if its testing and examination disclose that the alleged defect or ma...

  • Page 107: Disclaimer

    107 or tort (including negligence), for incidental, consequential, indirect, special, or punitive damages of any kind, or for loss of revenue or profits, loss of business, loss of information or data, or other financial loss arising out of or in connection with the sale, installation, maintenance, u...

  • Page 108: Open Source Software

    108 open source software the following table lists the open source software in the cs-700 products and the respective licenses under which these software packages are used. The specific open source software packages used in the cs-700product are: name version license type psp_linux 12.0 gnu gplv2 ps...

  • Page 109

    109 © yamaha corporation. All rights reserved. Published 12/2017 a0 m n - c s 7 0 0 - 2 0 1 7 1 1 - e n / 295 02 74-00 manufacturer: revolabs, inc. Address: 144 north road, suite 3250 sudbury, ma 01776, usa.