Copyright © 2011 by yamaha corporation english yd274c0 (disklavier e3 / disklavier control unit dkc-850) update manual table of contents updating the disklavier.............................................................................2 downloading the update program..................................
2 english updating the disklavier you can download the update program in one of two ways. ■ downloading the update program directly from the internet press [internet] on the remote control. The internet menu screen appears. Select “update” with the cursor buttons ([ ] [ ] [ ] [ ]), then press [enter...
Updating the disklavier english 3 following the instructions on the screen, select the option with the cursor buttons ([ ] [ ] [ ] [ ]), then press [enter]. The download process of the update program starts. After the download process is completed, shut down the disklavier by pressing [on/off] on th...
Updating the disklavier english 4 insert the usb flash memory including the update program into the usb port of the control unit. The update program is ready to be installed. Update the firmware following the procedures in “updating the disklavier” on page 4. Note: depending on the version or specif...
Updating the disklavier english 5 important: do not turn off this unit during update. Press [play/pause] to start the update. Important: be sure to update all the modules. The update process of the first module takes approximately 3 minutes. When the update of the first module completes, the followi...
