Yamaha DGX-500AD - 88-Note Touch-Sensitive Portable Electronic Keyboard Owner's Manual - 2-1
Disk Operations
78
5
Execute the Save operation.
Press the [+] button (“YES”), and the Save operation will start. Once started,
the operation cannot be canceled.
As the file is saving, “Saving” will appear on the top line of the display.
To avoid saving the file, press the [-] button (“NO”) instead of the [+] button
(“YES”).
To exit from the Save screen, press the [UTILITY] button repeatedly.
When the operation is completed, the following display briefly appears.
• If there isn’t enough space on the
disk, a “DiskFull” message
appears, and you will not be able
to save any data. You can delete
unneeded files on the disk (page
80), or replace the disk with a
new one and repeat the save
operation.
• If a write error occurs during a
save operation, an “Error” mes-
sage appears. If the error reoc-
curs after repeating the save
operation, there could be some-
thing wrong with the disk. Insert
a different disk in the drive and
retry the save operation.
Saving
s-U
• While the file is being saved
(the DISK IN USE lamp is lit),
never eject the floppy disk or
turn the power off.
Complete
Saving files in SMF Format 0
The DGX-500/300 can also save song data in SMF (Standard MIDI File) Format 0. To do this:
2-1
In step #2 of the above Save operation, after pressing the [SAVE]
button, press the [SAVE] button again to call up the SMF Save
mode.
2-2
Press the [EXECUTE] button.
2-3
Select a song for saving, if necessary, using the [+]/[-] buttons.
2-4
Press the [EXECUTE] button.
Continue with step #3 of the Save operation above.
to SMF?
User1
S-S