Yamaha DME-N Installation Manual

Manual is about: Yamaha Musical Instrument Owner's Manual

Summary of DME-N

  • Page 1

    Dme-n network driver installation guide for m7cl/ls9/dsp5d 1 dme-n network driver dme-n network driver installation guide for m7cl/ls9/dsp5d installation guide for m7cl/ls9/dsp5d attention please read this software license agreement (“agreement”) carefully before using this software. You are only pe...

  • Page 2: Special Notices

    Dme-n network driver installation guide for m7cl/ls9/dsp5d 2 5. Limitation of liability yamaha’s entire obligation hereunder shall be to permit use of the software under the terms hereof. In no event shall yamaha be liable to you or any other person for any damages, including, without limitation, an...

  • Page 3: Dme-N Network Driver

    Dme-n network driver installation guide for m7cl/ls9/dsp5d 3 to operate your yamaha hardware from your computer via ethernet, you’ll need to install the dme-n network driver software. Dme-n network driver is software that transfers midi data back and forth between your computer and the hardware via ...

  • Page 4: Installation

    Dme-n network driver installation guide for m7cl/ls9/dsp5d 4 1 log onto windows with administrator privileges. 2 after the downloaded compressed file is properly extracted, double-click the file “setup.Exe.” when the setup has been initialized, a “welcome” dialog box appears. Note when running under...

  • Page 5: Setup

    Dme-n network driver installation guide for m7cl/ls9/dsp5d 5 1 log onto windows with administrator privileges. Note in order to use the dme-n network driver, the computer and the device must be properly connected and configured. For details on connections, refer to “ connection of computer and devic...

  • Page 6

    Dme-n network driver installation guide for m7cl/ls9/dsp5d 6 5 set up the driver parameters via the “dme-n network driver” dialog box. Click the [new] button to input the ip address and other information in device information 2 when the devices connected are not displayed in target device list 1. Cl...

  • Page 7

    Dme-n network driver installation guide for m7cl/ls9/dsp5d 7 [remove] button deletes the selected device from the list. If the removed device is not the lowest device in the list, all devices below the removed device will be shifted upward to maintain the continuity of the list. [remove all] button ...

  • Page 8

    Dme-n network driver installation guide for m7cl/ls9/dsp5d 8 advanced setup the “advanced settings” dialog box can be opened by clicking the [advanced settings] button in the “dme-n network driver” dialog box. “advanced settings” dialog box the parameters in the “advanced settings” dialog box set up...

  • Page 9

    Dme-n network driver installation guide for m7cl/ls9/dsp5d 9 6 detected device list this list shows all detected devices. No devices will be displayed initially. [add] checkbox checked devices will be added to the target device list when the [add to device list] button (below) is clicked. Devices th...

  • Page 10: Tcp/ip Settings

    Dme-n network driver installation guide for m7cl/ls9/dsp5d 10 windows xp 1 access the control panel. 2 if the control panel appears as category view, click [switch to classic view]. 3 double-click [network connections]  [local area connection]. The “local area connection status” dialog box will be ...

  • Page 11

    Dme-n network driver installation guide for m7cl/ls9/dsp5d 11 windows vista / 7 / 8 1 access the control panel, then click or double-click [network and sharing center] or [view network status and tasks]. The “network and sharing center” is displayed. 2 click [manage network connection] or [change ad...

  • Page 12: Troubleshooting (Faq)

    Dme-n network driver installation guide for m7cl/ls9/dsp5d 12 when controlling the device from your computer via ethernet, the device does not operate correctly. • is the ethernet cable connected correctly? Refer to the “ connection of computer and device ” section. • is the dme-n network driver set...

  • Page 13

    Dme-n network driver installation guide for m7cl/ls9/dsp5d 13 if using other security software: either set the security software to allow use of tcp port number 12300 on the network card being used by the dme-n network driver. C.S.G., pro audio division © 2012 yamaha corporation 210mw-a0