Yamaha DTX-3000 Quick Connect Manual
Quick-Connect Guide
DTX-3000
Home Theater in a Box
YHT
YHT
home theater
1
2
3
8
5
7
4
Inspect Contents
After unpacking, inspect the contents to confirm you have the above items:
two front
speakers,
three surround speakers,
one center speaker,
powered subwoofer,
HTR-5740 A/V Receiver with
remote control,
DV-C6660 DVD Player with remote control,
speaker wire,
RCA cable,
audio/video RCA cable,
optical cable,
non-skid pads,
screws,
support bases, and
fasteners. Also included, but not shown, are
AM and FM antennas and three related Owner’s Manuals.
Attach Bottom Pads
Apply pads
to bottom of
speaker stand as shown.
13
Connect Center
Speaker Wire
Your
System
Room
Layout
Speaker Placement
After connection of the speakers place them so they appear in the
approximate positions as shown in the diagram above.
Yamaha created this package to greatly enhance your audio and home theater enjoyment. This Quick-Connect
Guide will help you get started. Follow the steps to connect the speakers first. Then connect your Receiver,
DVD Player and other components. Refer to your Owner’s Manuals as well as those that came with your other
components for complete instructions and precautions.
Be sure that all components are not plugged in while
making connections.
You will need the following which are not included in the package: Phillips screwdriver,
wire cutter/stripper. Brackets, toggle bolts, molly anchor screws or sheet metal screws are optional.
9
11
Thread Speaker Wire
Pass the
speaker wire through the underside of
speaker stand.
Connect
Front and
Surround
Speaker
Wire
Positive
(+) side of the
wire with white
stripe attaches
to (+) terminal.
Negative (-)
side attaches to
(-) terminal.
Subwoofer
Connection
Connect RCA Cable
Connect RCA cable
to subwoofer
. Set subwoofer VOLUME control
to half-way mark and POWER to OFF. Connect
RCA cable to receiver from subwoofer.
WARNING
Components must not be plugged
in while connecting them.
Connect Antennas to Receiver
Locate AM
loop antenna and indoor FM antenna. Keeping
receiver unplugged, connect as shown. For more
information about obtaining clear reception and
grounding, see your Owner’s Manual.
Antenna Connection
Indoor
FM Antenna
AM Loop Antenna
Front and Surround
Speaker Assembly
YST-SW030
Subwoofer
HTR-5740
Receiver
HTR-5740
Receiver
HTR-5740
Receiver
Receiver
Connections
FRONT
RIGHT LEFT
CENTER
SURROUND BACK
Cut speaker wire
to appropriate lengths for all speaker
connections. Connect speaker wire for center speaker
. The
positive (+) side of the wire with the white stripe attaches to
the red terminal. The negative (-) side attaches to the black
terminal. (See your HTR-5740 Owner’s Manual for more
information on speaker wire connections.)
6
Turn Speaker Stand Right-Side-Up
Remove
screw that holds adapter in, carefully set aside, then
remove adapter from speaker stand.
Thread Speaker Wire
Make sure speaker wire
continues to pass through the adapter.
Attach
Adapter to
the Speaker
using the
supplied screw
.
Push Together
the speaker and
adapter into the
speaker stand.
Attach adapter to
the speaker stand
using the screw
that was set
aside in Step 6.
10
SURROUND
RIGHT LEFT
Connect Speakers
Positive (+) side of the wire
with white stripe attaches
to (+) terminal. Negative (-)
side attaches to (-) terminal.
CAUTION
Receiver must
not be plugged in while
connecting speakers.
Mounting Speakers
to Wall (Optional)
Fasten mounting screws
into a firm wall or wall
support. Leave 7/32 in.
between head and wall.
Hang the keyholes on
the speaker backs on the
protruding screws.
WARNING
Please contact
a reliable source about
the best type of hardware
for your particular wall’s
construction. Secure
installation is purchaser’s
responsibility. See your
owner’s manual for
additional precautions.
12
(5)
(5)
(5)
(2)
(15)