Yamaha DTX-5000 Quick Connect Manual
2
Room Layout
Speaker Placement After assembly of the speakers place them so they appear in the
approximate positions as shown in the diagram above.
Quick-Connect Guide
DTX-5000
Home Theater in a Box
1
3
6
5
8
Connect Main Speaker
Wire For illustration purposes,
stand, which is now attached to
speaker, is not shown in diagram
above. Locate screw-type input
terminals at the rear of each of
the speakers. Connect the speaker
wire as shown. The positive (+)
side of the wire with the white
stripe attaches to the red terminal.
The negative (-) side attaches to
the black terminal. (Please see
your NS-FP9500 Owner’s Manual
for more detailed instructions
on speaker wire connections.)
Place assembled main speakers in
desired location to the left and
right of the viewing/audio source.
(See Step 2, Room Layout.)
Attach Bases to Stands Apply the non-skid pads
as shown in the
inset. Identify both speaker stands
and both bases
and attach using
short screws
as shown.
Attach Finishing Brackets
on top of two speaker stands.
Inspect Contents After unpacking, inspect the contents to confirm you have the above items:
two main
speakers,
three rear speakers,
one center speaker,
speaker wire,
two bases,
two speaker stands,
two finishing brackets,
RCA cable, one bag each of
long screws (8) and
short screws (4),
center speaker
bracket and screw,
subwoofer,
non-skid pads for base,
non-skid pads for stands,
cable protection seal for
base,
audio/video RCA cable,
HTR-5750 Receiver with remote,
and DV-S5770 DVD Player with remote, and
optical cable. Also included, but not shown, are AM and FM antennas and three related Owner’s Manuals.
9
Attach Bracket and Speaker Wire Attach bracket
to
center speaker
using supplied screw as shown. Attach speaker
wire as shown in Step 6.
Main Speaker Assembly
In the
Box
NOTE
Banana plug connectors
(not included) can be used to
connect speaker wire to speaker
terminals. Please see your Owner’s
Manual for directions.
Center Speaker Assembly
Yamaha created this package to greatly enhance your audio and home theater enjoyment. This Quick-Connect
Guide will help you get started. Follow the steps to assemble and connect the speakers first. Refer to your
Owner’s Manuals as well as those that came with your other components for complete instructions and
precautions. Be sure to turn off all power while making connections. You will need the following which are not
included in the package: Phillips screwdriver, wire cutter/stripper, toggle bolts, molly anchor screws or sheet
metal screws.
(8)
(2)
(4)
Thread
Speaker Wires
Cut speaker wire
to appropriate
lengths for
all speaker
connections and
set aside. Place
each long stand
upright on its
base. Thread
main speaker
wire through
oval opening on
stand and pull
through opening
on underside of
base. Pull wire all
the way through
leaving extra
length near oval
opening as shown.
Apply non-skid
pads
on stands.
4
Speaker
Wire
Attach Main
Speakers Lay stands
down. Line up holes
so that oval opening
is near speaker wire
connections on speaker.
Attach main speakers
using long screws as
shown. Attach cable
protection seal
to
base as shown in inset.
Mount Rear Speakers and Rear Center Speaker (Optional)
Fasten mounting screws into a firm wall or wall support as shown. Hang
the keyholes on the back of the each of the speakers
on the protruding
screws. Attach speaker wire as shown in Step 6.
For mounting
screws, use
minimum
1
3
/
4
"
tapping
screw (not
included).
Leave
1
/
4
"
space
between screw
head and wall.
16
7/32"
16
7/32"
TYPICAL
WARNING
If you are unsure of how to securely and safely fasten
speakers to a wall, please contact a reliable source about the best type of
hardware for your particular wall’s construction. Secure installation is the
purchaser’s responsibility. See Owner’s Manual for additional instructions
and precautions.
7
Rear
Speakers
1
3/4"
Use this size screw
Use this size screw
10
Receiver Connections
Connect Speakers Positive (+) side of the wire with
white stripe attaches to (+) terminal. Negative (-) side
attaches to (-) terminal.
CAUTION
Receiver must not be plugged in while
connecting speakers.
FRONT
Right Left
CENTER
SURROUND
BACK
SURROUND
Right Left
HTR-5750 Receiver