Yamaha DVD-S559 Service Manual
SERVICE MANUAL
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING:
Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA
Retailer or the appointed service representative.
IMPORTANT:
The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service
departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and
specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the
distributor’s Service Division.
WARNING:
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT:
Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
IMPORTANT NOTICE
1 0 1 0 0 3
SERVICE MANUAL
DVD-S559
DVD PLAYER
© 2006 All rights reserved.
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
DVD-S559
■
CONTENTS
TO SERVICE PERSONNEL . . . . . . . . . . . . . . . . . . 1–4
PREVENTION OF ELECTROSTATIC DISCHARGE . . . 4
LOCALE MANAGEMENT INFORMATION . . . . . . . . 4
FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
REAR PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . 5
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
INTERNAL VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
REPAIR NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
DISASSEMBLY PROCEDURES . . . . . . . . . . . . . . 9–12
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . 13-14
BLOCK DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . 15–18
WIRING DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PRINTED CIRCUIT BOARDS . . . . . . . . . . . . . . . 20–21
SCHEMATIC DIAGRAMS . . . . . . . . . . . . . . . . . . 22–29
REPLACEMENT PARTS LIST . . . . . . . . . . . . . . 30–31
REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . 32–33
‘06. 02