- DL manuals
- Yamaha
- Music Mixer
- EMX5
- Owner's Manual
Yamaha EMX5 Owner's Manual
Summary of EMX5
Page 1
Owner’s manual en if you wish to get started right away: if you encounter a problem: pages 6 to 9 quick start guide page 13 troubleshooting.
Page 2
2 emx5 owner’s manual the above warning is located on the rear of the unit. L’avertissement ci-dessus est situé sur l’arrière de l’unité. Explanation of graphical symbols explication des symboles the lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user t...
Page 3: Precautions
3 emx5 owner’s manual precautions please read carefully before proceeding please keep this manual in a safe place for future reference. Warning always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, ...
Page 4
4 emx5 owner’s manual connections • do not use speaker cables with a metal-housing connector. Doing so may result in electrical shock due to differences in voltage. Use speaker cables with a nonmetal-housing connector, or with a insulated-housing connector. • before connecting the device to other de...
Page 5
5 emx5 owner’s manual thank you and congratulations on your purchase of the yamaha powered mixer emx5. Please read this manual thoroughly to get the most out of the product and ensure long-term, trouble-free use. After reading this manual, keep it readily available for future reference. Main feature...
Page 6: Quick Start Guide
6 emx5 owner’s manual quick start guide getting sound to the speakers/ connection example rear panel (see page 12.) 2. 3. Passive speakers ac power cord 1. Turn off ( ) all switches (including the [ ] (power) switch). 2. Connect the devices you intend to use. (the diagram to the right shows a connec...
Page 7
Quick start guide 7 emx5 owner’s manual portable audio player passive speakers power amplifier note normally, speakers are connected via the [speakers a/b] jacks on the rear panel. However, if a higher output level is required, connect the speakers via a power amplifier that is connected to the [ste...
Page 8
Quick start guide 8 emx5 owner’s manual using the compressor when the compressor is applied to vocals, it evens out the input level, reducing the level of loud passages and bringing up softer passages. It also makes each sound more distinct, enabling the listener to better understand the performer’s...
Page 9
Quick start guide 9 emx5 owner’s manual using the built-in effects it is possible to add effects that simulate the sound of different performance environments, such as concert halls and small clubs. 1. Use the [program] rotary encoder to select the desired effect. Q turn the [program] rotary encoder...
Page 10: Controls and Functions
10 emx5 owner’s manual controls and functions q equalizer controls [high]/[mid]/[low] for adjusting the [high], [mid], and [low] audio frequencies. Turn- ing the control to the right amplifies (boosts) the corresponding fre- quency band, while turning to the left attenuates (cuts) the band. Setting ...
Page 11
Controls and functions 11 emx5 owner’s manual !9 level meter this uses led indicators to show the stereo l/r signal levels. The “0” ( ) segment corresponds to the nominal output level. The “peak” segment on the level meter lights up when output reaches the clipping level. @0 [feedback suppressor] sw...
Page 12
Controls and functions 12 emx5 owner’s manual #4 [speakers a/b] jacks use commercially available speaker cables to connect the speak- ers. These jacks can be used with both ts phone and speakon plugs. When connecting a speakon plug, insert it and turn until it locks in place. Also, the signal to be ...
Page 13: Troubleshooting
13 emx5 owner’s manual troubleshooting check the following items before contacting your yamaha dealer. If the problem remains, contact your nearest yamaha dealer. The power does not come on. Turn off the [ ] (power) switch and recheck the connection. Be sure that you are using the included power cor...
Page 14: Appendix
14 emx5 owner’s manual appendix when you wish to connect multiple speakers from the [speak- ers a/b] jacks in parallel, keep in mind that the overall imped- ance does not fall below 4 ohms. When connecting speakers with the same impedance in parallel, the overall impedance value is half with two spe...
Page 15
Appendix 15 emx5 owner’s manual the mixer orientation can be changed for ease in operation and for adapting to different installation needs. Vertical orientation this is convenient when operating the mixer on a tabletop. Vertical/horizontal orientation and installation horizontal orientation this is...
Page 16
Appendix 16 emx5 owner’s manual to prepare the mixer for rack mounting, use the rk-emx7 (rack-mount brackets) sold separately. This mixer requires 7u* of rack-mount space. * 7u is approximately 312 mm. Precautions for rack mounting this mixer is rated for operation at ambient temperatures rang- ing ...
Page 17
Appendix 17 emx5 owner’s manual * “lfo” stands for low frequency oscillator. An lfo is normally used to periodically modulate another signal, using different waveform shapes and modulation speeds. Effect programs no. Program parameter description 1 rev hall 1 reverb time reverb simulating a large sp...
Page 18
Appendix 18 emx5 owner’s manual *1 these jacks also can be connected with ts phone plugs. If you use ts phone plugs, the connection will be unbalanced. *2 since the hot and cold terminals of impedance balanced output jacks have the same impedance, the balanced connection enables these output jacks t...
Page 19
Appendix 19 emx5 owner’s manual dimensions 275 31 3 15 5 30 8 325 465 400 60 60 unit: mm.
Page 20
Appendix 20 emx5 owner’s manual for other specifications, see the included “technical specifications.” the contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the yamaha website then download the manual file. General specification...
Page 21: Index
21 emx5 owner’s manual index a [ac in] jack ....................................................................12 amplifier [limit] indicators........................................11 amplifier [mode] switch .....................................11, 12 amplifier [protection] indicators ...............
Page 22
22 emx5 owner’s manual 1. Important notice: do not modify this unit! This product, when installed as indicated in the instruc- tions contained in this manual, meets fcc require- ments. Modifications not expressly approved by yamaha may void your authority, granted by the fcc, to use the product. 2. ...
Page 23
23 emx5 owner’s manual.
Page 24
Address list head office yamaha corporation, audio products sales and marketing division 10-1, nakazawa-cho, naka-ku, hamamatsu, japan 430-8650 canada yamaha canada music ltd. 135 milner avenue, toronto, ontario, m1s 3r1, canada tel: +1-416-298-1311 u.S.A. Yamaha corporation of america 6600 orangeth...