1. DL manuals
  2. Yamaha
  3. Music Mixer
  4. EMX62M
  5. Owner's Manual

Yamaha EMX62M Owner's Manual

Manual is about: Yamaha Musical Instrument Owner's Manual EMX62M

Summary of EMX62M

  • Page 1

    E owner’s manual keep this manual for future reference..

  • Page 2: The Owner’S Manual

    Emx62m 1 the owner’s manual revisions thank you for purchasing the yamaha emx62m powered mixer. Parts of the emx62m owner’s manual have been revised. Please refer to the following revisions rather than the corresponding sections of the original owner’s manual. P.11 ■ main section c level meter this ...

  • Page 3

    ■ block & level diagrams ch in 1-4 ch5 in line [–10db] hi-z [–40/–10] lo w-z [–50/–20] ch6 in super hi-z [–30db] 1 2 1 2 pa d pa d [–10db] [–10db] phant om off on off on ha +15v [–10db] [–10db] ha ha a ux in [–10db] [–10db] level [–10db] level [–10db] level 2-stage eq low high low high low high 2-st...

  • Page 4: Important

    Fcc information (u.S.A.) 1. Important notice: do not modify this unit! This product, when installed as indicated in the instructions contained in this manual, meets fcc requirements. Modifications not expressly approved by yamaha may void your authority, granted by the fcc, to use the product. 2. Im...

  • Page 5: Precautions

    Precautions 3 emx62m—owner’s manual precautions warning • connect this unit’s power cord only to an ac outlet of the type stated in this owner’s manual or as marked on the unit. Failure to do so is a fire and electrical shock hazard. • do not allow water to enter this unit or allow the unit to becom...

  • Page 6

    4 precautions emx62m—owner’s manual.

  • Page 7: Introduction

    Contents 5 emx62m—owner’s manual introduction thank you for purchasing the yamaha emx62m powered mixer. In order to take full advantage of the emx62m and enjoy long and trouble-free operation, read this owner’s manual carefully, and keep it in a safe place for future reference. Features • the emx62m...

  • Page 8: Emx62M Quick Guide

    6 emx62m quick guide emx62m—owner’s manual emx62m quick guide the following steps (1-5) explain the basic con- nection and operation of the emx62m. Also, please read “front and rear panel” and “basic operation” following this quick guide section to learn more about using the emx62m. Connection conne...

  • Page 9

    Emx62m quick guide 7 emx62m—owner’s manual • to connect a second player, use the line jack or hi- z jack. • you cannot use the hi-z jack and the low-z jack for the same channel at the same time. If a microphone has already been connected to the low-z jack of a channel, you cannot connect a player to...

  • Page 10: Power On

    8 emx62m quick guide emx62m—owner’s manual power on 1 turn on the power to all external devices con- nected to the emx62m. 2 make sure that the master controls in the monitor section and the main section are set to “0,” then press the power switch on the emx62m to turn on the power. • be sure to fol...

  • Page 11: Front & Rear Panels

    Front & rear panels 9 emx62m—owner’s manual front & rear panels control panel ■ channel section the channel controls are used to set the eq, monitor and effect send levels, channel level, and pad for each channel. 1 high & low eq controls the 2-band equalizer allows you to boost or cut the low or hi...

  • Page 12: Digital Effect Section

    10 front & rear panels emx62m—owner’s manual ■ digital effect section the digital effect section is used to turn the built-in digital effects processor on and off and select effects programs. F vocal reverb, large hall, small hall switches these switches are used to select the effects pro- grams: vo...

  • Page 13: ■ Monitor Section

    Front & rear panels 11 emx62m—owner’s manual m peak level indicator this indicator indicates the level of the signal output from the main output jack (input/ output panel 9). Adjust the master control b so that this indicator lights up only momentarily to avoid distortion. N limiter indicator the li...

  • Page 14: Input/output Panel

    12 front & rear panels emx62m—owner’s manual input/output panel 1 hi-z, low-z (inputs 1–4) these are the input connectors for input chan- nels 1 through 4. Both the hi-z and low-z input can be used with microphones and, by using the pad switch (con- trol panel 5), can also be used with line-level so...

  • Page 15

    Front & rear panels 13 emx62m—owner’s manual i main—output jack the main—output phone jack outputs the main bus signal after the 7-band graphic equal- izer and master level control, and can be con- nected to the input of a larger mixer, or a more powerful amplifier, for example. J monitor—output the...

  • Page 16: Rear Panel

    14 front & rear panels emx62m—owner’s manual rear panel 1 speakers 1 & 2 jacks the speaker 1 & 2 phone jacks output the main signal from the internal power amplifier and are used to connect speakers. They are inter- nally connected in parallel and output the same signal. B ac in socket connect the i...

  • Page 17: Hookup Example

    Front & rear panels 15 emx62m—owner’s manual hookup example headphones larger mixer or amplifier *2 *1 *1. Although this example shows an external effects processor and footswitch, which is used to turn on and off the built-in digital effects processor, connected to the emx62m, in practice, only one...

  • Page 18: Basic Operation

    16 basic operation emx62m—owner’s manual basic operation connecting sources before connecting any microphones or instru- ments, make sure that the emx62m and any other applicable equipment is turned off. Also make sure that the level control on each emx62m input channel, and the main mas- ter and mo...

  • Page 19

    Installing an optional rack mount kit 17 emx62m—owner’s manual installing an optional rack mount kit you can rack-mount the emx62m using an optional rack mount kit (rk-88). Rack mount kit rk-88 • bracket × 2 • screw × 6 before you rack-mount the emx62m, make sure that sufficient ventilation will be ...

  • Page 20: Troubleshooting

    18 troubleshooting emx62m—owner’s manual troubleshooting the following table describes the possible malfunctions of this demvice, and the appropriate actions to be taken in each case. Powered mixer q&a problem cause action sound is no longer out- put from the speakers. The power indicator is lit. Th...

  • Page 21: Specifications

    Specifications 19 emx62m—owner’s manual specifications ■ general specifications for european model purchaser/user information specified in en55103-1 and en55103-2. Inrush current: 23a conformed environment: e1, e2, e3 and e4 maximum output power 135 w/8 Ω @0.5% thd at 1 khz (speakers out) 200 w/4 Ω ...

  • Page 22: Input Specifications

    20 specifications emx62m—owner’s manual ■ input specifications ■ output specifications • phone jacks are unbalanced. • 0 db= 0.775 vrms, 0 dbv= 1 vrms. ■ dimensions specifications are subject to change without prior notice. Input connectors pad actual load impedance nominal impedance input level con...

  • Page 23: ■ Block & Level Diagrams

    Block & level diagrams 21 emx62m—owner’s manual ■ block & level diagrams ch in 1-4 ch5 in line [– 10db] hi-z [– 40/ – 10] low-z [– 50/ – 20] ch6 in super hi-z [– 30db] 1 2 1 2 pa d pa d [– 10db] [– 10db] phant om off on off on ha +15v [– 10db] [– 10db] ha ha aux in [– 10db] [– 10db] level [– 10db] l...

  • Page 26

    Yamaha corporation v833080 r1 1 ap 24 pro audio & digital musical instrument division p.O. Box 3, hamamatsu, 430-8651, japan np printed in taiwan.