–15 +15 high mid low level monitor effect –15 +15 –15 +15 0 +15 0 +15 0 10 pad –15 +15 1 high mid low level monitor effect –15 +15 –15 +15 0 +15 0 +15 0 10 1 pad 2 pad –15 +15 3 high mid low level monitor effect –15 +15 –15 +15 0 +15 0 +15 0 10 3 pad 4 5 4 pad 5 pad 6 6 1 2 1 1 2 2 1 2 eeengine see ...
Emx66m 1 the owner’s manual revisions thank you for purchasing yamaha emx66m powered mixer. Parts of the emx66m owner’s manual have been revised. Please refer to the following revisions rather than the corresponding sections of the original owner’s manual. P.10 ■ main section c level meter this led ...
6 emx66m ■ block and level diagram main-bridge main-main main-mon inv main effect monitor level [-16db] [-22db] monit or effect [-6db] [-6db] [0db] [0db] sum [-16db] effect return effect return 3-stage eq ha [-10db] [-10db] [-10db] [-10db] ba ba ba [-22db] [-22db] [-22db] [-16db] a ux in ba [0db] a ...
Fcc information (u.S.A.) 1. Important notice: do not modify this unit! This product, when installed as indicated in the instructions contained in this manual, meets fcc requirements. Modifications not expressly approved by yamaha may void your authority, granted by the fcc, to use the product. 2. Im...
3 emx66m—owner’s manual precautions warning • connect this unit’s power cord only to an ac outlet of the type stated in this owner’s manual or as marked on the unit. Failure to do so is a fire and electrical shock hazard. • do not allow water to enter this unit or allow the unit to become wet. Fire ...
4 emx66m—owner’s manual.
5 emx66m—owner’s manual introduction thank you for purchasing the yamaha emx66m powered mixer. In order to take full advantage of the emx66m and enjoy long and trouble-free perfor- mance, please read this owner’s manual carefully, and keep it in a safe place for future reference. Features • the emx6...
6 emx66m quick guide emx66m—owner’s manual emx66m quick guide the following steps (1–5) explain the basic con- nection and operation of the emx66m. Also, please read “front and rear panel” and “basic operation” following this quick guide section to learn more about using the emx66m. Connection conne...
Emx66m quick guide 7 emx66m—owner’s manual connecting a cd player, md player, and/or cassette deck connect a cd player or md player to the 2tr in jacks. Refer to the operation manual of the corre- sponding device for more information on the input and output of the device. • to connect a second playe...
8 emx66m quick guide emx66m—owner’s manual power on 1 turn on the power to all external devices con- nected to the emx66m. 2 make sure that the master controls in the monitor section and the main section are set to “0,” then press the power switch on the emx66m to turn on the power. • be sure to fol...
Front and rear panel 9 emx66m—owner’s manual front and rear panel control panel ■ channel section in this section, you can adjust equalization (fre- quency response), volume level, effect and moni- tor output levels for the input signal of each channel. 1 equalizer controls (high, mid, low) this is ...
10 front and rear panel emx66m—owner’s manual ■ digital effect section this section allows you to turn the built-in digital effect on/off and to select the effect type. 6 effect select switch and indicator select the effect type for the built-in digital effect. The indicator of the selected effect t...
Front and rear panel 11 emx66m—owner’s manual ■ monitor section this section allows you to adjust the tone and volume of the monitor bus, and specify the mix level of the built-in effect and the external input signals. D graphic equalizer this is a 7-band graphic equalizer that allows you to adjust ...
12 front and rear panel emx66m—owner’s manual ■ phantom switch and indicator k phantom switch and indicator this switch turns the phantom power supply on/ off for the low-z input jacks of channels 1–4 and mic input jacks of channels 5–6. When the switch is turned on, the indicator lights up. Turn th...
Front and rear panel 13 emx66m—owner’s manual input/output panel 1 hi-z, low-z input jacks these are the input jacks for channels 1–4. By using the pad switches (control panel 5) you can connect any of the jacks to a wide range of sources from mics to line level devices (synthesiz- ers or rhythm box...
14 front and rear panel emx66m—owner’s manual 4 foot switch jack (foot sw) a separately sold yamaha fc5 foot switch can be connected to this jack. If a foot switch is con- nected to this jack, you can use your foot to switch the built-in digital effect on/off. 5 aux in/2tr in—input to main jacks the...
Front and rear panel 15 emx66m—owner’s manual rear panel 1 speaker output jacks (speakers) connect speakers here. The emx66m has two internal power amplifiers. There are three ways in which speakers can be connected to the emx66m. • two-channel connection • two-channel parallel connection • bridge c...
16 installation/connection emx66m—owner’s manual installation/connection installation the emx66m uses a forced cooling system with intake on the bottom of the rear panel and exhaust on the top of the rear panel to avoid blocking the heated air flow. Connection when connecting various devices, be sur...
Installation/connection 17 emx66m—owner’s manual ■ when the power amp select switch is set to main bridge • bridge connection one 8-16 Ω speaker can be connected to the bridge jack. If you are using a speaker rated at 8 Ω , the maxi- mum output would be 600w. Caution: when using a bridge connection,...
18 installation/connection emx66m—owner’s manual ■ example connections 1 2 1 1 2 2 1 2 eeengine see rear panel caution hi-z hi-z hi-z hi-z low-z low-z low-z low-z line mic mic super hi-z effect out foot sw aux in input to main out put 2tr in rec out main monitor on / off 88 *1 the figure above shows...
Basic operation 19 emx66m—owner’s manual basic operation this section explains basic operation of the emx66m. Connecting microphones and instruments 1 before connecting mics or instruments, make sure that the power of all equip- ment (where applicable) is turned off. Also make sure that the level co...
20 example setups emx66m—owner’s manual example setups this section provides some ways in which the emx66m can be used, and explains connections and operation. As a conference pa system/installed sound system here is an example of using the emx66m as a conference pa system or as an installed sound s...
Example setups 21 emx66m—owner’s manual as a band pa here is an example of using the emx66m as a small pa for a band. In this example, the monitor speakers are being sent a mix that is independent of the main speaker mix. An external effect such as delay or reverb is also being used. Connections • c...
22 example setups emx66m—owner’s manual sending an independent mix to the monitor speakers 1 set the monitor section master con- trol to the “√ √ √ √ ” position. 2 raise the monitor controls for the chan- nels that you wish to hear from the moni- tor speakers. 3 use the graphic equalizers and master...
Installing an optional rack mount kit 23 emx66m—owner’s manual installing an optional rack mount kit you can rack-mount the emx66m using an optional rack mount kit (rk-88). Rack mount kit rk-88 • bracket × 2 • screw × 6 before you rack-mount the emx66m, make sure that sufficient ventilation will be ...
24 troubleshooting emx66m—owner’s manual troubleshooting the following table describes the possible malfunctions of this device, and the appropriate actions to be taken in each case. Powered mixer q&a problem cause action sound is no longer out- put from the speakers. The power indicator is lit. The...
Specifications 25 emx66m—owner’s manual specifications ■ general specifications • 0 db=0.775 vrms maximum output power 300 w + 300 w/4 Ω @0.5% thd at 1 khz (speakers out a, b) 205 w + 205 w/8 Ω @0.5% thd at 1 khz (speakers out a, b) 600 w/8 Ω @0.5% thd at 1 khz (bridge) frequency response 20 hz–20 k...
26 specifications emx66m—owner’s manual ■ input specifications ■ output specifications • all output jacks are unbalanced. • 0 db=0.775 vrms, 0 dbv=1 vrms. Specifications are subject to change without prior notice. For european model purchaser/user information specified in en55103-1 and en55103-2. In...
Specifications 27 emx66m—owner’s manual ■ dimensions 482 305 328 unit : mm.
28 specifications emx66m—owner’s manual ■ block and level diagram main-bridge main-main main-mon inv main effect monito r level [-16db] [-22db] monit o r effect [-6db] [-6db] [0db] [0db] sum [-16db] effect return effect return 3-stage eq ha [-10db] [-10db] [-10db] [-10db] ba ba ba [-22db] [-22db] [-...
Yamaha corporation v832720 r0 1 ap 32 pwro audio & digital musical instrument division p.O. Box 3, hamamatsu, 430-8651, japan np printed in taiwan.
