Haltech head office: ph: +612 9729 0999 fax: +612 9729 0900 email: sales@haltech.Com haltech us office: email: usa@haltech.Com see the haltech website for your local authorised dealer. Www.Haltech.Com version 1 yamaha pwc ht-140980 quick start guide.
Limited warranty lockin pty ltd trading as haltech warrants the haltech tm programmable fuel injection system to be free from defects in material or workmanship for a period of 12 months from the date of purchase. Proof of purchase, in the form of a bill of sale or receipted invoice, which indicates...
Auxiliary connector the auxiliary connector is used to connect additional inputs and outputs to the installation. Terminations are outlined below. Auxiliary connector legend- wire colours b=black br=brown g=green gy=grey l=blue o=orange p=pink r=red v=violet y=yellow w=white when two colours are use...
Yamaha pwc kit overview the haltech yamaha pwc kit is designed to quickly and easily replace the factory fitted ecu on yamaha pwc's, all mounting hardware and patch harnesses have been designed to allow for quick installation. Notes on installation • ensure pwc is stabilized and ready to work on • d...
Ecu connection table 34 pin connector installation installing the haltech elite yamaha pwc kit into your pwc is simple. Installation notes are based on a new installation in conjunction with the haltech plug and play wbc1 kit ( ht-010730) step 1: using the mounting screws provided with your elite ec...
Step 2: remove the ecu splash cover on the pwc to reveal the oem ecu. Disconnect and remove the oem ecu from the pwc figure 3 – removing the splash cover figure 4 – oem ecu mounted on support engine control relay (ecr) latching the ecu requires the engine control relay (ecr) to activate after the us...
Step 8: upload the basemap to the ecu connect the program/setup loop connector to the patch harness to power up the ecu. With the ecu powered up connect to the ecu using the haltech elite software programmer (esp). When connected navigate through the software to file>upload map>yamaha and select the...
Step 4: install the wbc wiring harness and wbc1 to the pwc if purchased (see wbc yamaha pwc quick start guide for detailed information.) step 5: install the plug and play yamaha patch harness to the pwc connect the 3 main pwc engine harness connectors to the patch loom. Connect the 2 main ecu connec...
