Yamaha ME02R96 Owner's Manual

Manual is about: memory expansion kit

Page of 9

Download

Print this page

Bookmark us

ME02R96

ENGLISH

DEUTSCH

FRANÇAIS

ESP

ME02R96

Owner’s Manual

Thank you for your purchase of the YAMAHA ME02R96 memory expansion kit for the 02R96 mixer.

By replacing the original CPU board with this ME02R96 expansion board, you will expand your

mixer’s automix memory to 7MB—a sevenfold increase that will make your mixer even more versa-

tile and even easier to use.

Please read through the following precautions carefully before having the serviceperson install this

ME02R96 expansion kit. Be sure to retain the manual in a safe place.

Precautions

WARNINGS

Failure to observe the following warnings may lead to fatality or serious injury from fire or

electric shock.

CAUTIONS

Failure to observe the following cautions may lead to injury, or may result in damage to

equipment or other property.

●

Do not attempt to disassemble or modify the

ME02R96 board. Do not apply excessive force to

board connectors or other board components.

(Mishandling of the board may lead to shock, fire

hazard, or equipment failure.)

●

Be sure to unplug the 02R96 main unit from the

power supply before installing the ME02R96

board (to eliminate shock hazard).

●

Be careful to avoid catching or snagging fingers

while carrying out the installation.

●

Before starting installation, be sure to save all

important data from the 02R96 unit to an external

MIDI device. This installation process will clear all

of the unit’s user memory and will reset all set-

tings to their defaults.

●

When handling the ME02R96 board, do not

touch the board’s metallic leads (pins). (Pins are

sharp and may cause hand cuts.)

●

The ME02R96 board is electrostatic-sensitive.

Before handling the board, you should briefly

touch the main unit’s metal casing with your bare

hand so as to drain off any static charge from

your body.

●

Be sure to install the included lithium battery. This

is a backup battery that is required maintain the

data in the 02R96’s expanded memory.

The ME02R96 expansion kit must be installed by an authorized

serviceperson. Please contact a local Yamaha dealer or a service

center to arrange for installation. Do not attempt to install the

ME02R96 on your own.

1 2 3 4 5 6 7 Next › »

Summary of ME02R96

Page 1
1 me02r96 english deutsch franÇais esp a Ñ ol me02r96 owner’s manual thank you for your purchase of the yamaha me02r96 memory expansion kit for the 02r96 mixer. By replacing the original cpu board with this me02r96 expansion board, you will expand your mixer’s automix memory to 7mb—a sevenfold incre...
Page 2: Fcc Information (U.S.A.)
1. Important notice: do not mod- ify this unit! This product, when installed as indicated in the instructions contained in this man- ual, meets fcc requirements. Modifica- tions not expressly approved by yamaha may void your authority, granted by the fcc, to use the product. 2. Important: when conne...
Page 3
2 me02r96 english * please dispose of used batteries in accordance with local regulations. * illustrations in this manual are for explanatory purposes only, and may not match the actual appearance of the product. * company names and product names used herein are trademarks or registered trademarks o...
Page 4
3 me02r96 english ● note about versions and upgrades system software: the me02r96 includes system version 1.20 or higher, and is not compatible with pre-v1.20 soft- ware. Before upgrading your 02r96 again in the future, be sure that your updater program is v1.20 or higher. Studio manager: the me02r9...
Page 5
4 me02r96 english ● install the me02r96 expansion kit ~the following instructions are intended for use by authorized serviceper- sons only.~ detach and raise the control panel 1. Turn off the 02r96 power switch, and unplug the 02r96 power cord from the power supply. 2. If sp02r96 side panels are ins...
Page 6
5 me02r96 english 3. If the mb02r96 peak meter bridge is installed on the 02r96, remove it. First disconnect the bridge cable from the meter connector on the 02r96. Then remove the 4 screws holding the bridge in place (as shown below), and remove the bridge. 2 screws meter connector 2 screws 02r96.
Page 7
6 me02r96 english 4. Remove the screws indicated in the illustration below: 7 screws from the left side, 7 screws from the right side, 7 screws from the front, and 7 screws (or 5 screws, if 2 were already removed at step 3) from the rear. 5. Hold onto the lcd, and lift up the rear of the control pan...
Page 8
7 me02r96 english install the me02r96 expansion board and the battery 1. Disconnect the 2 flat cables from the connectors on the cpu board. The cables are connected to white connectors. Before disconnecting each cable, pull the con- nector latch up as shown in the illustration. 2. Remove the 4 screw...
Page 9
8 me02r96 english reattach the control panel 1. Lower the control panel back into place. Then refasten with the original screws, in the following order: front panel first, then the sides, and then the rear. When fastening each panel, always fasten the positioning screw first (see illustrations on pa...