Yamaha MG24/14fx Owner's Manual

Other manuals for MG24/14fx: Owner's Manual, Service Manual, Service Manual

Summary of MG24/14fx

  • Page 1

    Mixing console owner’s manual mg32/14 fx mg24/14 fx e mg32-14fx_e.Book page 1 thursday, june 12, 2003 3:10 pm.

  • Page 2

    Please read carefully before connecting a lamp to the lamp jack. (page 18) • do not use a lamp that grounds pin 2 or pin 3 to the shell (body). Use of the wrong lamp type may result in damage to the mixer. Recommended lamps: littlite’s x-hi series of gooseneck lamps. • do not inadvertently connect a...

  • Page 3

    Mg32/14fx, mg24/14fx 2 the above warning is located on the rear of the unit • explanation of graphical symbols the lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that...

  • Page 4: Precautions

    Mg32/14fx, mg24/14fx 3 precautions please read carefully before proceeding * please keep this manual in a safe place for future reference. Warning always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damage...

  • Page 5: Fcc Information (U.S.A.)

    Mg32/14fx, mg24/14fx 4 always turn the power off when the device is not in use. The performance of components with moving contacts, such as switches, volume controls, and connectors, deteriorates over time. Consult quali- fied yamaha service personnel about replacing defective components. Copying of...

  • Page 6

    Mg32/14fx, mg24/14fx 5 mg32-14fx_e.Book page 5 thursday, june 12, 2003 3:10 pm.

  • Page 7: Introduction

    Mg32/14fx, mg24/14fx 6 introduction thank you for your purchase of the yamaha mg32/14fx or mg24/14fx mixing console. This console offers excellent cost-performance and is ideal for use as the main mixer in an sr setup or as part of an installed system. Please read through this owner’s manual careful...

  • Page 8

    Introduction mg32/14fx, mg24/14fx 7 (1) be sure that the mixer’s power switch is off ( ). (2) connect the socket end of the power cord to the ac in connec- tor on the rear of the mixer. (3) plug the other end of the power cord into a standard household power outlet. Be sure to unplug the power cord ...

  • Page 9: Front & Rear Panels

    Mg32/14fx, mg24/14fx 8 front & rear panels front panel note: within this manual, all panel illustrations show the mg32/14fx panel. 11 8 10 3 4 2 7 6 5 1 9 8 channel control block master control block 1 monaural channels section (p. 10) 3 stereo/mono section (p. 13) 2 stereo channels section (p. 10) ...

  • Page 10

    Front & rear panels mg32/14fx, mg24/14fx 9 rear panel note: within this manual, all panel illustrations show the mg32/14fx panel. 12 13 rear input/output block 12 channel i/o section (p. 19) 13 master i/o section (p. 20) mg32-14fx_e.Book page 9 thursday, june 12, 2003 3:10 pm.

  • Page 11

    Front & rear panels mg32/14fx, mg24/14fx 10 ■ monaural channels section stereo channels section 1 pad switch when this switch is on ( ), the mixer attenuates the input signal by 26 db. 2 gain control adjusts the gain applied to the input signal level. To get the best balance between the s/n ratio an...

  • Page 12

    Front & rear panels mg32/14fx, mg24/14fx 11 5 aux controls (aux1 to aux6) these knobs adjust the channel’s signal levels into aux buses 1 to 6. Each knob controls the signal into the corresponding aux bus. For aux1 to aux4, you use the pre switch ( 6 ) to select whether the pre-fader or post-fader s...

  • Page 13

    Front & rear panels mg32/14fx, mg24/14fx 12 g phantom +48 v switch toggles phantom power on or off to a set of eight adjacent channels. The mg32/14fx has three of these switches: for chs 1 to 8, for chs 9 to 16, and for chs 17 to 24. The mg24/14fx has two: for chs 1 to 8 and for chs 9 to16. If using...

  • Page 14

    Front & rear panels mg32/14fx, mg24/14fx 13 ■ stereo/mono section you use this section to independently adjust the levels of the out- puts from the st bus. You can independently adjust the main stereo output, the sub stereo output, and the mixed monaural output. 1 st sub out control adjusts the leve...

  • Page 15

    Front & rear panels mg32/14fx, mg24/14fx 14 ■ group section this section adjusts the level and controls the flow of the signals from the four group buses. While the signal from each group bus is always fed into the corresponding group out jack (see page 20), you are also free to use the to st and af...

  • Page 16

    Front & rear panels mg32/14fx, mg24/14fx 15 ■ return section this section adjusts the levels of the input from the return 1 and return 2 jacks (see page 20). For each return, you can set independent levels for feeds into the st bus and aux buses 1 to 4. 1 aux mix controls (1 to 4) each knob adjusts ...

  • Page 17

    Front & rear panels mg32/14fx, mg24/14fx 16 ■ internal digital effects section you use this section to control the dual internal effects processor: to select the two effect types, to set the effects on or off, and to adjust the related signal levels and flows. 1 program dials this dial sets the effe...

  • Page 18

    Front & rear panels mg32/14fx, mg24/14fx 17 ■ meter/phones section you use these meters to view various signal levels: the levels to the st out jacks, the pfl and afl levels, and the levels to the group out jacks. The pfl or afl signals indicated by these meters can be monitored through the phones j...

  • Page 19

    Front & rear panels mg32/14fx, mg24/14fx 18 ■ talk back section 1 mic jack an unbalanced xlr input jack, for connection to a talkback microphone. This jack does not supply phantom power. 2 talkback control adjusts the talkback level. 3 aux1-4 switch if this switch is on ( ), the mixer feeds the sign...

  • Page 20

    Front & rear panels mg32/14fx, mg24/14fx 19 ■ channel i/o section 1 monaural-channel input jacks (mg32/14fx: chs 1 to 24, mg24/14: chs 1 to 16) • input a these are balanced xlr input jacks. • input b these are balanced phone input jacks. You can connect either balanced or unbalanced phone plugs to t...

  • Page 21

    Front & rear panels mg32/14fx, mg24/14fx 20 ■ master i/o section 1 return jacks (1, 2) these are unbalanced phone input jacks. The signal into each of these jacks feeds into the st bus and into aux buses 1 to 4. These jacks are typically used to receive a return signal from an external effector (rev...

  • Page 22

    Front & rear panels mg32/14fx, mg24/14fx 21 7 st insert i/o (l, r) jacks these are balanced trs (tip, ring, sleeve) phone-type bidirec- tional jacks. You use these jacks, for example, to connect to an external effector, submixer, or other such device. Connection to an insert i/o jack requires a spe-...

  • Page 23: Appendix

    Mg32/14fx, mg24/14fx 22 appendix ■ general specifications where 0 dbu = 0.775 v and 0 dbv= 1 v 1 rs = 150 ohms measured with 12.7 khz, –6 db/oct. Low pass filter (equivalent to 20 khz, – ∞ filter). 2 turning pan/bal to left or right. 3 shelving turnover/rolloff frequency: 3 db before maximum cut or ...

  • Page 24

    Appendix mg32/14fx, mg24/14fx 23 ■ input specifications where 0 dbu = 0.775 v and 0 dbv= 1 v 1 input sensitivity: the lowest level that will produce the nominal output level when the unit is set to maximum gain. 2 mg32/14fx: ch29(l)/30(r), ch31(l)/32(r), mg24/14fx: ch21(l)/22(r), ch23(l)/24(r) ■ out...

  • Page 25

    Appendix mg32/14fx, mg24/14fx 24 ■ digital effect type list • common to effect 1 and 2 • effect 1 • effect 2 * the led can not blink any faster than an interval of 256 ms (234.3 bpm). No. Type description controllable parameter parameter variable range 1 reverb hall reverberation simulating a spacio...

  • Page 26

    Appendix mg32/14fx, mg24/14fx 25 ■ mg32/14fx ■ mg24/14fx dimensional diagrams 1027 765 98.5 101 140 551 415 48 unit: mm 819 98.5 557 101 140 551 415 48 unit: mm mg32-14fx_e.Book page 25 thursday, june 12, 2003 3:10 pm.

  • Page 27

    Appendix mg32/14fx, mg24/14fx 26 block and level diagram.

  • Page 28

    Appendix mg32/14fx, mg24/14fx 27.

  • Page 29

    For details of products, please contact your nearest yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. Die einzelheiten zu produkten sind ...