Mlan audio/midi processor english deutsch français owner’s manual bedienungsanleitung mode d’emploi.
2 this product utilizes batteries or an external power supply (adapter). Do not connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by yamaha. Warning: do not place this product in a position where anyone could wa...
3 (3)-6 • when cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical- impregnated wiping cloths. Also, do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard. • do not rest your weig...
4 introduction thank you for purchasing the yamaha mlan8p. The mlan8p is an interface unit that supports “mlan,” a digital network for music which employs a high-performance serial bus “ieee1394.” the mlan8p enables you to configure audio and midi signal networks easily now without repeatedly re-mak...
5 table of contents introduction ................................................................................... 4 package contents........................................................................... 4 features .................................................................................
6 english features ■ fast data transfer via mlan “mlan” is a digital network designed for music applications. It uses and extends the industry standard “ieee1394” high performance serial bus. You can now configure more advanced systems much more easily. Please refer to the separate “mlan guide book”...
7 english features ■ basic concept of mlan8p the diagram shown above illustrates the signal flow through each device connected via the mlan8p. You can set the input source and output destination of audio and midi signals of the various devices via the mlan8p. Specifically, signals can be input from ...
8 english names and functions top panel front panel push on/standby phones volume input volume midi /utility mixer2 mixer1 lock data rt/err page –1/exit +1/enter in out-a out-b direct wclk sys meter aux1 aux2 l r value 1 2 3 4 9 10 11 12 5 6 7 8 a b c d e f g h i –mix– j phones mlan8p-(e).Book page ...
9 english names and functions a leds the led lights up to indicate the status of the unit as follows: [lock] the condition in which the mlan8p receives word clock from another device correctly is called “lock.” the left lock led indicates the status of signals input at digital in. The right lock led...
10 english names and functions rear panel a contrast this knob is used to adjust the contrast of the lcd on the top panel. B analog in/out jacks these jacks are used to input and output analog audio signals. They are also called a/d in and d/a out respectively, since sig- nals input at analog in are...
11 english names and functions f coaxial in/out jacks these jacks are used to input and output dig- ital audio signals via digital audio pin cables. Select either the coaxial in jacks or optical in jacks. (page 33.) these jacks, along with the optical in/out jacks 7 are also called “dig- ital in/out...
12 english connections this section explains how to connect mlan and midi devices (such as tone generators and key- boards) to a personal computer via the mlan8p. (1) connecting the power supply adaptor connect the plug of the included power supply adaptor (pa-5c) to the dc in jack on the rear panel...
13 english connections (3) connecting an mlan (ieee1394) device use an ieee1394 standard (6-pin) cable to connect the mlan (ieee1394) jack on the mlan (ieee1394) device to the mlan (ieee1394) jack on the mlan8p. At this time, you do not have to turn off the power to either device. (4) connecting a w...
14 english connections (5) connecting analog audio devices (amplifier, speakers, mixer, etc.) connect analog out 1/l and 2/r to two channels on the mixer. (6) connecting a digital audio device use digital audio cables to connect a digital audio device, such as a cd player or md player, to the mlan8p...
15 english connections (7) connecting a pair of headphones connect a pair of headphones to the phones jacks on the front panel of the mlan8p to monitor the signal output at analog out 1/l and 2/r (stereo mix). Turning the power on/off when you finish connecting the mlan8p and necessary devices, make...
16 english digital audio device audio device mlan device (e.G., s80+mlan8e) midi device midi in coaxial in optical in (digital in* 2 ) mlan jacks1-3 mlan8p mlan audio input* 3 digital mixer section* 1 mlan midi in analog in 1/l, 2/r (a/d in) midi/ mlan midi conversion mlan midi/ midi conversion aux ...
17 english about the name of mlan plugs: some mlan plug names start with an asterisk (*). This means that they are directly connected to the rear panel connectors of the mlan8p. For example, “*in (midi in)” plug outputs signals input at the midi in terminal (on the rear panel of the mlan8p) to the m...
18 english function trees ■ mixer input section (mlan audio 1-8 ch) ■ mixer input section (digital audio 9-10 ch, analog audio 11-12 ch) ■ mixer output section (mlan audio output) mode button channel button page button to navigate [+1/enter] [–1/exit] button and [value] dial to set reference page [m...
19 english function trees ■ midi section ■ direct out ■ word clock ■ system section ■ level meters mode button channel button page button to navigate [+1/enter] [–1/exit] button and [value] dial to set reference page [midi/ utility] [in] midi in device/nickname selects the output destination of the ...
20 english routing i/o signals between mlan devices after connecting the mlan8p to each device via cables, you can easily route and connect i/o sig- nals between the devices without re-patching the cables. An operation common to both input and output connections is performed. The diagram above illus...
21 english connecting i/o signals between mlan devices input to the mlan8p • input1–8...[mixer1] • input9–12...[mixer2] • midi out a/b...[midi/utility] output to other mlan devices • aux1 (a1), aux2 (a2), mix out l (l), mix out r (r)...[mixer2] • digital in l, digital in r, a/d in l, a/d in r, midi ...
22 english connecting i/o signals between mlan devices 4-1. In the “from:” field, use the [+1/enter] and [–1/exit] buttons or the [value] dial to select the desired device to connect to channel 1 on the mlan8p. The device/nickname of the selected device flashes. If you are setting the output destina...
23 english connecting i/o signals between mlan devices 7. The mlan plug name flashes a few times, then the mlan8p displays a confirmation screen for the connection changes. Press [enter] to confirm the changes. To cancel the changes, press [exit]. If the utility confirmation is set to “off,” a confi...
24 english mode functions this section explains how to route mlan audio input signals from connected devices to the mlan8p and how to set the mixer function parameters. Assign any of eight channel signals from the connected devices to channels [1] - [8], digital in sig- nals to channels [9] and [10]...
25 english mode functions [audio in plug] select an input “plug” for connection from the mlan plugs (virtual plugs) on the selected device. If the device does not have an appropriate mlan plug, “no source (destination) plug” appears. This screen does not appear for [mixer 2] channels [9] - [12] (dig...
26 english mode functions [aux 1/2] this parameter enables you to set the volume level of the input audio signal that is sent to aux 1 and 2. The signal sent to aux 1 and 2 can be assigned to any channel on the mlan. Value: – ∞ db (minimum send level) - +6 db (maximum send level) [ch (channel on/off...
27 english mode functions you can assign the aux 1/2 signals (routed in the mixer input section) to any mlan channel. 1. Press the [mixer 2] button. 2. Press the [aux 1] or [aux 2] button. 3. Use the [ page ] button to select a parameter you wish to set. 4. Use the [+1/enter] and [–1/exit] buttons o...
28 english mode functions [level] this parameter enables you to set the volume level of the aux signal sent to the output. Value: 0db - – ∞ db you can assign audio input signals (routed in the mixer input section) to any mlan channel. 1. Press the [mixer 2] button. 2. Press the [l] or [r] button. 3....
29 english mode functions [balance (output balance)] this parameter enables you to set the stereo balance of the stereo audio output signal. The default value is 0 (center). When you raise the l value, the stereo position shifts to left. When you raise the r value, the stereo position shifts to righ...
30 english mode functions [midi in plug] select a “plug” (that sends out the midi signal) from the mlan plugs (virtual plugs) on the selected device. If the device does not have an appropriate mlan plug, “no source (destina- tion) plug” appears. You can select multiple destinations. If multiple devi...
31 english mode functions the utility section enables you to set various parameters for the digital in/out, a/d in and d/a out connections, word clock, and system. A [midi/utility] - [direct] follow the steps below to route signals from digital in and a/d in directly to any mlan channel, while bypas...
32 english mode functions [wordclock source] this parameter is used to select the method of setting the mlan8p’s word clock. If you have selected “manual,” use the [device/nickname] parameter to specify the name of the device (on the mlan) that you wish to assign as the word clock master. Value: int...
33 english mode functions c [midi/utility] - [sys] follow the steps below to make system-related settings. 1. Press the [midi/utility] button. 2. Press the [sys] button. 3. Use the [ page ] button to select a parameter you wish to set. 4. Use the [+1/enter] and [–1/exit] buttons or the [value] dial ...
34 english mode functions [set nickname] [select device/nickname] press the [+1/enter] button in the [set nickname] screen to display this parameter. Select the device/nickname of the device on the mlan whose [nickname] you wish to change. Use the [+1/enter], [–1/exit] buttons or the [value] dial to...
35 english mode functions [mlan8p set root] this parameter is used to assign the mlan8p as the root of the mlan. Press the [+1/enter] button to display the screen to confirm the setting. Press the [+1/enter] button again to specify the mlan8p as the root. Press the [–1/exit] button to exit the scree...
36 english mode functions d [midi/utility] - [meter] follow the steps below to display the level meters. The “c” mark appears when the signal clips. 1. Press the [midi/utility] button. 2. Press the [meter] button. 3. Use the [ page ] button to select the level meter group you wish to view (all ch, i...
37 english led/lcd messages led messages while the mlan8p (scanning the connected devices, four leds flash in green. Error messages top panel led function status lock (left) indicates the “lock” status of the signal input at digital in. Green ... Lock, off ... Unlock lock (right) indicates the “lock...
38 english specifications mlan : ieee1394 high performance serial bus data rate s200, isochronous resource manager capable, bus manager capable, connection manager conforms to iec61883-6 audio and music protocol digital audio 8in/8out, midi 2in/1out sampling rate : 44.1khz, 48khz analog i/o : analog...
39 english index symbols +1/enter and –1/exit buttons .................. 9 page button ............................. 9 a active led .............................................. 11 analog in/out jacks ............................ 10 auto ........................................................ 32 a...
40 english p pan/balance ......................................... 26 phone volume ....................................... 9 phones jack ............................................. 9 r rs232c jack ............................................. 13 rt/err led ............................................
3 (3)-6 yamaha ist nicht für solche schäden verantwortlich, die durch falsche verwendung des instruments oder durch veränderungen am instrument hervorgerufen wurden, oder wenn daten verlorengehen oder zerstört werden. Stellen sie stets die stromversorgung aus, wenn das instrument nicht verwendet wir...
4 einführung vielen dank für den kauf des yamaha mlan8p. Beim mlan8p handelt es sich um eine schnittstelleneinheit, die „mlan“ unterstützt. Mlan ist ein digitales netzwerk für musik, das den seriellen hochleistungs-bus „ieee 1394“ verwendet. Der mlan8p ermöglicht ihnen die problemlose konfiguration ...
5 inhaltsverzeichnis einführung...................................................................................... 4 lieferumfang .................................................................................. 4 leistungsmerkmale ...................................................................
6 deutsch leistungsmerkmale ■ schnelle datenübertragung über mlan bei „mlan“ handelt es sich um ein für musikalische anwendungen entwickeltes digitales netz- werk, das den als industriestandard definierten seriellen hochleistungs-bus „ieee 1394“ verwendet und erweitert. Damit lassen sich auf einfach...
7 deutsch leistungsmerkmale ■ grundkonzeption des mlan8p das oben abgebildete diagramm zeigt den signalfluß durch die einzelnen über den mlan8p mit- einander verbundenen geräte. Eingangsquelle und ausgabeziel der audio- und midi-signale der verschiedenen geräte können über den mlan8p eingestellt wer...
8 deutsch bezeichnungen und funktionen oberseite vorderseite push on/standby phones volume input volume midi /utility mixer2 mixer1 lock data rt/err page –1/exit +1/enter in out-a out-b direct wclk sys meter aux1 aux2 l r value 1 2 3 4 9 10 11 12 5 6 7 8 a b c d e f g h i –mix– j phones 44 mlan8p-(g...
9 deutsch bezeichnungen und funktionen a led-anzeigen die aufleuchtenden led-anzeigen geben fol- gendermaßen den status der einheit an: [lock] der zustand, in dem der mlan8p korrekt wordclock-signale von einem anderen gerät erhält, wird „lock“ genannt. Die linke lock- led zeigt den status von digita...
10 deutsch bezeichnungen und funktionen rückseite a contrast mit diesem knopf können sie den kontrast der lcd-anzeige auf der oberseite einstel- len. B analog in/out-buchsen Über diese buchsen werden ein- und aus- gehende analoge audiosignale geleitet. Sie werden auch “ a/d in“ bzw. „d/a out“ genann...
11 deutsch bezeichnungen und funktionen f coaxial in/out-buchsen Über diese buchsen werden unter verwen- dung von digitalen pin-kabeln ein- und aus- gehende digitale audiosignale geleitet. Wählen sie entweder die coaxial in- oder die optical in-buchsen aus. (seite 33) diese buchsen wer- den zusammen...
12 deutsch anschlüsse in diesem abschnitt wird erklärt, wie mlan- und midi-geräte (wie tongeneratoren und key- boards) über den mlan8p an einen pc angeschlossen werden. (1) anschließen des netzadapters schließen sie zunächst die buchse des mitgelieferten netzadapters (pa-5c) an die dc in-buchse auf ...
13 deutsch anschlüsse (3) anschließen eines mlan-(ieee1394)-geräts schließen sie über ein ieee1394-(6-pin)-standardkabel die mlan-(ieee1394)-buchse des mlan-(ieee1394)-geräts an die mlan-(ieee1394)-buchse des mlan8p an. Dazu muß keines der geräte ausgeschaltet werden. (4) anschließen eines windows-c...
14 deutsch anschlüsse (5) anschließen von analogen audiogeräten (verstärker, lautsprecher, mischpult usw.) verbinden sie die buchsen analog out 1/l und 2/r mit zwei kanälen des mischpults. (6) anschließen eines digitalen audiogeräts schließen sie über digitale audiokabel ein digitales audiogerät wie...
15 deutsch anschlüsse (7) anschließen eines kopfhörers schließen sie zum abhören der ausgegebenen signale an den ausgängen analog out 1/l und 2/r (stereo mix) an die phones-buchse auf der vorderseite des mlan8p einen kopfhörer an. Ein- und ausschalten des geräts wenn der mlan8p und alle erforderlich...
16 deutsch digitales audiogerät audio- gerät mlan-gerät (z.B., s80+mlan8e) midi- gerät midi in coaxial in optical in (digital in* 2 ) mlan-buchsen 1-3 mlan8p mlan- audioeingang* 3 digital- mischpult- block* 1 mlan midi in analog in 1/l, 2/r (a/d in) midi/ mlan-midi- konvertierung mlan-midi/ midi- ko...
17 deutsch informationen zu den namen von mlan-steckern (mlan plugs): den namen einiger mlan-stecker ist ein sternchen (*) vorangestellt. Das bedeutet, daß sie direkt an die buchsen auf der rückseite des mlan8p angeschlossen sind. Der stecker „*in (midi in)“ leitet beispielsweise signale weiter, die...
18 deutsch funktionsschemata ■ mischpulteingangs-block (mlan-audiokanal 1-8) ■ mischpulteingangs-block (digitale audiokanäle 9-10, analoge audiokanäle 11-12) ■ mischpultausgangs-block (mlan-audioausgang) modusknopf kanalknopf auswahl mit page-knopf funktion der knöpfe [+1/enter] / [–1/ exit] und des...
19 deutsch funktionsschemata ■ midi-block ■ direct out ■ wordclock ■ system-block ■ pegelanzeigen modusknopf kanalknopf auswahl mit page-knopf funktion der knöpfe [+1/enter] / [–1/ exit] und des [value]-drehrads siehe seite [midi/ utility] [in] midi in device/nickname wählt das ausgabeziel des am an...
20 deutsch leitwege von i/o-signalen zwischen mlan-geräten sind alle kabelverbindungen zwischen den geräten und dem mlan8p hergestellt, lassen sich die leitwege der i/o-signale zwischen den geräten problemlos ohne umstecken der kabel festlegen. Der dazu erforderliche vorgang ist für ein- und ausgehe...
21 deutsch leitwege von i/o-signalen zwischen mlan-geräten auf dem mlan8p eingehende signale • input1–8...[mixer1] • input9–12...[mixer2] • midi out a/b...[midi/utility] signalausgabe an andere mlan-geräte • aux1 (a1), aux2 (a2), mix out l (l), mix out r (r)...[mixer2] • digital in l, digital in r, ...
22 deutsch leitwege von i/o-signalen zwischen mlan-geräten 4-1. Verwenden sie die knöpfe [+1/enter] und [–1/exit] oder das [value]-drehrad, um im feld „from:“ das mit kanal 1 des mlan8p zu verbindende gerät auszuwählen. Bezeichnung/nickname des ausgewähl- ten geräts blinken auf. Beim einstellen des ...
23 deutsch leitwege von i/o-signalen zwischen mlan-geräten 7. Der name des mlan-steckers blinkt einige male auf, anschließend erscheint auf dem display eine anzeige zum bestätigen der Änderungen, die sie an der verbindung vorgenommen haben. Drücken sie [enter], um die Änderungen zu bestätigen. Drück...
24 deutsch modusfunktionen in diesem abschnitt wird dargestellt, wie die von den angeschlossenen geräten eingehenden mlan-audiosignale an den mlan8p geleitet und die parameter der mischpult-funktion einge- stellt werden. Weisen sie ein signal von einem der acht kanäle eines angeschlossenen geräts be...
25 deutsch modusfunktionen [audio in plug] wählen sie für die verbindung aus den mlan-steckern (virtuellen steckern) des ausgewählten geräts einen „input plug“ (eingangsstecker) aus. Besitzt das gerät keinen geeigneten mlan- stecker, wird „no source (destination) plug“ angezeigt. Für die [mixer 2]-k...
26 deutsch modusfunktionen [aux 1/2] mit diesem parameter können sie den lautstärkepegel des an aux 1 und 2 gesendeten eingangssignals einstellen. Das an aux 1 und 2 gesendete signal kann jedem beliebigen kanal im mlan zugeordnet werden. Wert: – ∞ db (minimaler sendepegel) - +6 db (maximaler sendepe...
27 deutsch modusfunktionen sie können die (über den mischpulteingangs-block geleiteten) aux 1/2-signale jedem beliebigen mlan-kanal zuweisen. 1. Drücken sie den knopf [mixer 2]. 2. Drücken sie einen der knöpfe [aux 1] oder [aux 2]. 3. Wählen sie mit hilfe des knopfs [ page ] einen einzustellenden pa...
28 deutsch modusfunktionen [level] mit diesem parameter können sie den lautstärkepegel des an den ausgang gesendeten aux- signals einstellen. Wert: 0db - – ∞ db sie können die (über den mischpulteingangs-block geleiteten) audioeingangssignale jedem belie- bigen mlan-kanal zuweisen. 1. Drücken sie de...
29 deutsch modusfunktionen [balance (output balance)] mit diesem parameter können sie die stereobalance des ausgehenden stereosignals einstellen. Der standardwert ist 0 (center). Wenn sie den l-wert erhöhen, wird die stereoposition nach links verschoben. Erhöhen sie den r-wert, wird die stereopositi...
30 deutsch modusfunktionen [midi in plug] wählen sie aus den mlan-plugs (virtuellen steckern) des ausgewählten geräts den stecker aus, der das midi-signal sendet. Besitzt das gerät keinen geeigneten mlan-stecker, wird „no source (destination) plug“ angezeigt. Sie können mehrere ziele auswählen. Wenn...
31 deutsch modusfunktionen der utility-block ermöglicht ihnen das einstellen verschiedener parameter für die digital in/out-, a/d in- und d/a out-verbindungen sowie für die wordclock und das system. A [midi/utility] - [direct] folgen sie den nachfolgenden schrittanweisungen, um signale von digital i...
32 deutsch modusfunktionen [wordclock source] mit diesem parameter können sie die einstellmethode der wordclock des mlan8p auswählen. Wird „manual“ ausgewählt, geben sie mit dem parameter [device/nickname] den namen des mlan-geräts an, das sie als wordclock-master festlegen möchten. Wert: internal 4...
33 deutsch modusfunktionen c [midi/utility] - [sys] folgen sie den nachfolgenden bedienungsschritten, um systembezogene einstellungen vorzuneh- men. 1. Drücken sie den knopf [midi/utility]. 2. Drücken sie den knopf [sys]. 3. Wählen sie mit hilfe des knopfs [ page ] einen einzustellenden parameter au...
34 deutsch modusfunktionen [set nickname] [select device/nickname] drücken sie in der displayanzeige [set nickname] den knopf [+1/enter], um diesen parameter anzuzeigen. Wählen sie das mlan-gerät bzw. Den nickname (spitznamen) des mlan-geräts aus, dessen [nickname] sie ändern möchten. Wählen sie mit...
35 deutsch modusfunktionen [mlan8p set root] mit diesem parameter wird dem mlan8p die rolle des stammknotens (root) des mlan zugewiesen. Drücken sie den knopf [+1/enter], um die bestätigungsabfrage anzuzeigen. Drücken sie erneut den knopf [+1/enter], um den mlan8p als stamm zu definieren. Drücken si...
36 deutsch modusfunktionen d [midi/utility] - [meter] folgen sie den nachfolgenden schrittanweisungen, um die pegelanzeigen auf dem display darzu- stellen. Das zeichen „c“ wird angezeigt, wenn das signal übersteuert wird. 1. Drücken sie den knopf [midi/utility]. 2. Drücken sie den knopf [meter]. 3. ...
37 deutsch led-/lcd-meldungen meldungen der led-anzeigen während der mlan8p die angeschlossenen geräte scannt, blinken die vier led-anzeigen grün auf. Fehlermeldungen oberseiten-led funktion status lock (links) zeigt den lock-status des digital in-signal- eingangs an. Grün ... Lock, aus... Unlock lo...
38 deutsch technische daten mlan : ieee1394 serieller hochleistungs-bus datenrate s200, fähigkeit zur isochronen ressourcenverwaltung, bus-manager- fähig, verbindungsmanager entspricht iec61883-6 audio- und musikprotokoll digital audio 8in/8out, midi 2in/1out abtastrate : 44,1 khz, 48 khz analog i/o...
39 deutsch index symbols +1/enter- und –1/exit-knöpfe ................. 9 page -knopf ................................ 9 a active-led ............................................. 11 analog in/out-buchsen ....................... 10 auto ........................................................ 32 aux...
40 deutsch o on/standby ............................................ 9 optical in/out-buchsen ....................... 11 output balance ................................... 29 output source ......................................... 33 p page-knopf ............................................... 9 pan...
3 (3)-6 yamaha n'est pas responsable des détériorations causées par une utilisation impropre de l'instrument, ou par des modifications apportées par l'utilisateur, pas plus qu'il ne peut couvrir les données perdues ou détruites. Toujours laisser l'appareil hors tension lorsqu'il est inutilisé. Preca...
4 introduction merci d'avoir acheté le mlan8p de yamaha. Le mlan8p est un module d'interface prenant en charge le « mlan », un réseau numérique dédié à la musique qui utilise un bus série « ieee1394 » de haute performance. Le mlan8p vous permet de configurer facilement des réseaux de signaux audio e...
5 table des matières introduction ................................................................................... 4 contenu du carton ......................................................................... 4 fonctionnalités .........................................................................
6 français fonctionnalités ■ transfert rapide des données via mlan le réseau numérique « mlan » est conçu pour les applications musicales. Il utilise et étend le bus série « ieee1394 » de haute performance, considéré comme le standard de l'industrie. Vous avez ainsi la possibilité de configurer des ...
7 français fonctionnalités ■ concept de base du mlan8p le graphique présenté ci-dessus illustre le flux de signaux au travers de chaque dispositif connecté via le mlan8p. Celui-ci vous permet de régler la source d'entrée et la destination de sortie des signaux audio et midi des différents dispositif...
8 français noms et fonctions panneau supérieur panneau avant push on/standby phones volume input volume midi /utility mixer2 mixer1 lock data rt/err page –1/exit +1/enter in out-a out-b direct wclk sys meter aux1 aux2 l r value 1 2 3 4 9 10 11 12 5 6 7 8 a b c d e f g h i –mix– j phones 82 mlan8p-(f...
9 français noms et fonctions a del la del s'allume pour indiquer le statut du module comme suit : [lock] (verrouillage) la position dans laquelle le mlan8p reçoit cor- rectement une synchronisation de mots prove- nant d'un autre dispositif est appelée « lock ». La del lock de gauche indique le statu...
10 français noms et fonctions panneau arrière a contrast (contraste) ce bouton est utilisé pour régler le contraste de l'écran à cristaux liquides situé sur le panneau supérieur. B prises analog in/out (entrée/ sortie analogique) ces prises servent à recevoir et envoyer des signaux audio analogiques...
11 français noms et fonctions f prises coaxial in/out (entrée/ sortie coaxiale) ces prises servent à recevoir et émettre des signaux audio numériques via des câbles à bro- ches audio numériques. Sélectionnez les prises coaxial in ou optical in (entrée optique) (page 33). Celles-ci ainsi que les pri-...
12 français connexions cette section explique comment connecter des dispositifs mlan et midi (tels que des généra- teurs de son et des claviers) à un ordinateur via le réseau mlan8p. (1) branchement de l'adaptateur de courant connectez la prise de l'adaptateur d'alimentation (pa-5c) inclus à la pris...
13 français connexions (3) connexion d'un dispositif mlan (ieee1394) utilisez un câble standard ieee1394 (à 6 broches) fourni pour connecter la prise mlan (ieee1394) du dispositif mlan (ieee1394) à la prise mlan (ieee1394) du mlan8p. Cette connexion ne nécessite pas la mise hors tension des disposit...
14 français connexions (5) connexion de dispositifs audio analogiques (amplificateur, haut-parleurs, mixeur, etc.) connectez analog out 1/l et 2/r à deux canaux du mixeur. (6) connexion d'un dispositif audio numérique utilisez des câbles audio numériques pour connecter un appareil audio numérique, t...
15 français connexions (7) connexion d'un casque connectez un casque aux prises phones situées sur le panneau avant du mlan8p pour contrôler l'émission des signaux aux sorties analog out 1/l et 2/r (mixage stéréo). Mise sous/hors tension de l'appreil après avoir connecté le mlan8p et les dispositifs...
16 français dispositif audio numérique dispositif audio dispositif mlan (par exemple, s80+mlan8e) dispositif midi midi in coaxial in optical in (digital in* 2 ) prises mlan 1-3 mlan8p entrée audio mlan * 3 section du mixeur numérique* 1 mlan midi in analog in 1/l, 2/r (a/d in) conversion midi/midi m...
17 français À propos des noms de prises mlan : certains noms de prises mlan commencent par une astérisque (*). Cela signifie qu'elles sont directement connectées aux connecteurs du panneau arrière du mlan8p. Par exemple, la prise « *in (midi in) » envoie des signaux reçus par la borne midi in (sur l...
18 français arborescence des fonctions ■ section d'entrée du mixeur (canaux audio 1-8 de mlan) ■ section d'entrée du mixeur (canaux audio numériques 9-10, canaux audio analogiques 11-12) ■ section de sortie du mixeur (sortie audio mlan) touche de mode touche de canal touche de page pour la navigatio...
19 français arborescence des fonctions ■ section midi ■ direct out (sortie directe) ■ word clock (horloge de mots) ■ section système ■ compteurs de niveaux touche de mode touche de canal touche de page pour la navigation touche [+1/enter] [–1/exit] et cadran [value] pour le réglage page de référence...
20 français acheminement de signaux e/s entre des dispositifs mlan après avoir connecté le mlan8p à chacun des dispositifs à l'aide de câbles, vous pouvez facile- ment acheminer et connecter des signaux e/s entre les différents dispositifs sans devoir raccorder à nouveau les câbles entre eux. Une op...
21 français connexion de signaux e/s entre des dispositifs mlan entrée dans le mlan8p • input1–8...[mixer1] • input9–12...[mixer2] • midi out a/b...[midi/utility] sortie vers d'autres dispositifs mlan • aux1 (a1), aux2 (a2), mix out l (l), mix out r (r)...[mixer2] • digital in l, digital in r, a/d i...
22 français connexion de signaux e/s entre des dispositifs mlan 4-1. Dans la zone « from: » (À partir de), utilisez les touches [+1/enter] et [–1/exit] ou le cadran [value] pour sélectionner le dispositif souhaité pour connecter le canal 1 au mlan8p. Le paramètre device/nickname du dispositif sélect...
23 français connexion de signaux e/s entre des dispositifs mlan 7. Le nom de la fiche mlan clignote à plusieurs reprises, puis mlan8p affiche un écran de confirmation pour les changements de connexion. Appuyez sur [enter] pour confirmer les modifications. Pour annuler les modifications, appuyez sur ...
24 français fonctions de mode cette section explique comment acheminer des signaux d'entrée audio mlan depuis les disposi- tifs connectés au mlan8p et comment définir les paramètres de la fonction mixer (mixeur). Affectez les signaux de l'un des huit canaux des dispositifs connectés aux canaux [1] -...
25 français fonctions de mode [audio in plug] (prise d'entrée audio) sélectionnez une « prise » d'entrée pour vous connecter à partir des prises mlan (prises virtuelles) du dispositif sélectionné. Si le dispositif ne possède pas de prise mlan appropriée, le message « no source (destination) plug » (...
26 français fonctions de mode [aux 1/2] (auxiliaire 1/2) ce paramètre vous permet de régler le volume du signal d'entrée audio qui est envoyé vers aux 1 et 2. Le signal envoyé à aux 1 et 2 peut être affecté à n'importe quel canal du mlan. Valeur : – ∞ db (niveau d'envoi minimal) - +6 db (niveau d'en...
27 français fonctions de mode vous pouvez affecter les signaux aux 1/2 (acheminés dans la section d'entrée du mixeur) à n'importe quel canal mlan. 1. Appuyez sur la touche [mixer 2]. 2. Appuyez sur la touche [aux 1] ou [aux 2]. 3. Utilisez la touche [ page ] pour sélectionner le paramètre que vous s...
28 français fonctions de mode [level] (niveau) ce paramètre vous permet de régler le volume du signal aux envoyé à la sortie. Valeur : 0db - – ∞ db vous pouvez affecter des signaux d'entrée audio (acheminés dans la section d'entrée du mixeur) à n'importe quel canal mlan. 1. Appuyez sur la touche [mi...
29 français fonctions de mode [balance (output balance)] (Équilibre de sortie) ce paramètre vous permet de régler l'équilibre stéréo du signal audio de sortie stéréo. La valeur par défaut est 0 (centre). Lorsque vous augmentez la valeur l (à gauche), la position stéréo glisse vers la gauche. Si vous...
30 français fonctions de mode [midi in plug] (prise d'entrée midi) sélectionnez une « prise » (qui envoie le signal midi) parmi les prises mlan (prises virtuelles) du dispositif sélectionné. Si le dispositif ne possède pas de prise mlan appropriée, le message « no source (destination) plug » (pas de...
31 français fonctions de mode la section utility (utilitaires) vous permet de régler différents paramètres pour les connexions digital in/out, a/d in et d/a out, l'horloge de mots et le système. A [midi/utility] - [direct] suivez les étapes ci-dessous pour acheminer directement des signaux depuis di...
32 français fonctions de mode [wordclock source] (source de l'horloge de mots) ce paramètre est utilisé pour sélectionner la méthode de réglage de l'horloge de mots du mlan8p. Si vous sélectionnez « manual » (manuel), utilisez le paramètre [device/nickname] pour spécifier le nom du dispositif (du ml...
33 français fonctions de mode c [midi/utility] - [sys] suivez les étapes ci-dessous pour effectuer les réglages liés au système. 1. Appuyez sur la touche [midi/utility]. 2. Appuyez sur la touche [sys]. 3. Utilisez la touche [ page ] pour sélectionner le paramètre que vous souhaitez régler. 4. Utilis...
34 français fonctions de mode [set nickname] (définir le surnom) [select device/nickname] (sélectionner un dispositif/surnom) appuyez sur la touche [+1/enter] dans l'écran [set nickname] pour afficher ce paramètre. Sélectionnez le paramètre device/nickname du dispositif du mlan dont vous voulez modi...
35 français fonctions de mode [mlan8p set root] ce paramètre est utilisé pour affecter le mlan8p en tant que racine du mlan. Appuyez sur la touche [+1/enter] pour afficher l'écran permettant de confirmer le réglage. Appuyez de nouveau sur la touche [+1/enter] pour spécifier le mlan8p en tant que rac...
36 français fonctions de mode d [midi/utility] - [meter] suivez les étapes ci-dessous pour afficher les compteurs de niveau. Le signe « c » apparaît lorsque le signal est écrêté. 1. Appuyez sur la touche [midi/utility]. 2. Appuyez sur la touche [meter]. 3. Utilisez la touche [ page ] pour sélectionn...
37 français messages del/lcd messages del lorsque le mlan8p analyse les dispositifs connectés, quatre del vertes clignotent. Messages d'erreur del du panneau supérieur fonction statut lock (gauche) indique le statut « lock » du signal émis par digital in. Verte … lock (verrouillé), off (désactivé).....
38 français spécifications mlan : bus série ieee1394 de haute performance débit binaire s200, gestionnaire de ressources isochrone, gestionnaire de bus, gestionnaire de connexion conforme au protocole musique et audio iec61883-6 8 entrées/8 sorties audio numériques, 2 entrées/1 sortie midi taux d'éc...
39 français index a auto ........................................................ 32 aux1/2 .............................................. 26, 27 b bornes midi in/out ................................ 10 c câbles à broches audio numériques ......... 11 câbles à fibres optiques ..........................
40 français p pan/balance ......................................... 26 phone volume (volume du casque) ....... 9 position stéréo ......................................... 26 prise dc in .............................................. 10 prise phones ............................................ 9 pris...
8p-hyo4.Fm page 41 wednesday, october 11, 2000 11:10 am.
Fcc information (u.S.A.) 1. Important notice: do not modify this unit! This product, when installed as indicated in the instructions con- tained in this manual, meets fcc requirements. Modifications not expressly approved by yamaha may void your authority, granted by the fcc, to use the product. 2. ...
For details of products, please contact your nearest yamaha or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. Die einzelheiten zu produkten sind bei ihrer unten...
This document is printed on recycled chlorine free (ecf) paper with soy ink. Auf recycling-umweltpapier gedruckt. Ce document a été imprimé sur du papier recyclé non blanchi au chlore. M.D.G.,pro audio & digital musical instrument division, yamaha corporation © 2000 yamaha corporation v516510 010apa...