Yamaha MTN850-AH Owner's Manual

Summary of MTN850-AH

  • Page 1

    Q read this manual carefully before operating this vehicle. Owner’s manual mtn850-ah bs2-28199-20 bs2-9-20_oce_brazil-e_hyoshi.Indd 1 2016/09/29 17:13:59.

  • Page 2

    Eau46091 read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold. Cover21.Fm 1 ページ 2016年9月5日 月曜日 午前10時7分 bs2-9-20_oce_brazil-e_hyoshi.Indd 2 2016/09/29 17:13:59.

  • Page 3: Introduction

    Introduction eau10103 welcome to the yamaha world of motorcycling! As the owner of the mtn850-ah, you are benefiting from yamaha’s vast experience and newest technology regarding the design and manufacture of high-quality products, which have earned yamaha a reputation for dependability. Please take...

  • Page 4: Important Manual Information

    Important manual information eau10134 particularly important information is distinguished in this manual by the following notations: *product and specifications are subject to change without notice. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey a...

  • Page 5: Important Manual Information

    Important manual information eau10201 mtn850-ah owner’s manual ©2016 by yamaha motor co., ltd. 1st edition, august 2016 all rights reserved. Any reprinting or unauthorized use without the written permission of yamaha motor co., ltd. Is expressly prohibited. Printed in japan. Bs2-28199-20.Book 2 ページ ...

  • Page 6: Table of Contents

    Table of contents location of important labels........... 1-1 safety information ........................... 2-1 description ....................................... 3-1 left view ......................................... 3-1 right view ....................................... 3-2 controls and instrum...

  • Page 7: Table of Contents

    Table of contents checking and lubricating the sidestand................................... 8-30 lubricating the swingarm pivots ... 8-31 checking the front fork ................. 8-31 checking the steering................... 8-32 checking the wheel bearings ....... 8-32 battery .......................

  • Page 8: Location of Important Labels

    1-1 1 2 3 4 5 6 7 8 9 10 11 12 location of important labels eau10385 read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of your vehicle. Never remove any labels from your vehicle. If a label becomes difficult to read or comes off, ...

  • Page 9: Location of Important Labels

    Location of important labels 1-2 1 2 3 4 5 6 7 8 9 10 11 12 4aa-22259-40 warning before you operate this vehicle, read the owner’s manual and all labels. Always wear an approved motorcycle helmet, eye protection, and protective clothing. 1tp-2118k-a1 use premium unleaded gasoline with min. 95 octane...

  • Page 10: Safety Information

    2-1 1 2 3 4 5 6 7 8 9 10 11 12 safety information eau1028b be a responsible owner as the vehicle’s owner, you are respon- sible for the safe and proper operation of your motorcycle. Motorcycles are single-track vehicles. Their safe use and operation are de- pendent upon the use of proper riding tech...

  • Page 11: Safety Information

    Safety information 2-2 1 2 3 4 5 6 7 8 9 10 11 12 tice riding your motorcycle where there is no traffic until you have become thoroughly famil- iar with the motorcycle and all of its controls.  many accidents have been caused by error of the motorcycle opera- tor. A typical error made by the op- er...

  • Page 12: Safety Information

    Safety information 2-3 1 2 3 4 5 6 7 8 9 10 11 12 ment.  do not run engine indoors. Even if you try to ventilate engine exhaust with fans or open windows and doors, carbon monoxide can rap- idly reach dangerous levels.  do not run engine in poorly venti- lated or partially enclosed areas such as b...

  • Page 13: Safety Information

    Safety information 2-4 1 2 3 4 5 6 7 8 9 10 11 12 dorse nor recommend the use of ac- cessories not sold by yamaha or modifications not specifically recom- mended by yamaha, even if sold and installed by a yamaha dealer. Aftermarket parts, accessories, and modifications while you may find aftermarket...

  • Page 14: Safety Information

    Safety information 2-5 1 2 3 4 5 6 7 8 9 10 11 12  check that the fuel cock (if equipped) is in the “off” position and that there are no fuel leaks.  point the front wheel straight ahead on the trailer or in the truck bed, and choke it in a rail to pre- vent movement.  shift the transmission in g...

  • Page 15: Description

    3-1 1 2 3 4 5 6 7 8 9 10 11 12 description eau10411 left view 3 4 5,6,7 8 9 10 12 11 1, 2 1. Front fork spring preload adjusting bolt (page 5-20) 2. Front fork compression damping force adjusting screw (page 5-20) 3. Shock absorber assembly rebound damping force adjusting screw (page 5-22) 4. Seat (...

  • Page 16: Description

    Description 3-2 1 2 3 4 5 6 7 8 9 10 11 12 eau10421 right view 1 4 6 7 8 9 10 5 2, 3 1. Fuel tank cap (page 5-16) 2. Front fork spring preload adjusting bolt (page 5-20) 3. Front fork rebound damping force adjusting screw (page 5-20) 4. Fuse box 1 (page 8-34) 5. Coolant reservoir (page 8-15) 6. Engi...

  • Page 17: Description

    Description 3-3 1 2 3 4 5 6 7 8 9 10 11 12 eau10431 controls and instruments 1 2 3 4 5 6 7 8 1. Clutch lever (page 5-14) 2. Left handlebar switches (page 5-4) 3. Main switch/steering lock (page 5-2) 4. Multi-function meter unit (page 5-8) 5. Front brake fluid reservoir (page 8-24) 6. Right handlebar...

  • Page 18: Special Features

    4-1 1 2 3 4 5 6 7 8 9 10 11 12 special features eau76422 d-mode (drive mode) d-mode is an electronically controlled engine performance system. This mod- el has three mode selections: “std”, “a”, and “b”. Warning ewa18440 do not change the drive mode while the vehicle is moving. With the throttle gri...

  • Page 19: Special Features

    Special features 4-2 1 2 3 4 5 6 7 8 9 10 11 12 setting the traction control system with the throttle closed, push this switch down to change from tcs “1” to tcs “2”. Push up to change from “2” to “1”. With the vehicle stopped, push this switch up for two seconds to turn the system off. Push down to...

  • Page 20: Special Features

    Special features 4-3 1 2 3 4 5 6 7 8 9 10 11 12 resetting the traction control sys- tem the traction control system will auto- matically disable when:  the front wheel or rear wheel comes off the ground while riding.  excessive rear wheel spin is de- tected while riding.  either wheel is rotated ...

  • Page 21

    5-1 1 2 3 4 5 6 7 8 9 10 11 12 instrument and control functions eau10978 immobilizer system this vehicle is equipped with an immo- bilizer system to help prevent theft by re-registering codes in the standard keys. This system consists of the fol- lowing:  a code re-registering key (with a red bow) ...

  • Page 22

    Instrument and control functions 5-2 1 2 3 4 5 6 7 8 9 10 11 12 ference. Eau10474 main switch/steering lock the main switch/steering lock controls the ignition and lighting systems, and is used to lock the steering. The various positions are described below. Tip be sure to use the standard key (blac...

  • Page 23

    Instrument and control functions 5-3 1 2 3 4 5 6 7 8 9 10 11 12 to lock the steering 1. Turn the handlebars all the way to the left. 2. With the key in the “off” position, push the key in and turn it to “lock”. 3. Remove the key. Tip if the steering will not lock, try turning the handlebars back to ...

  • Page 24

    Instrument and control functions 5-4 1 2 3 4 5 6 7 8 9 10 11 12 eau66054 handlebar switches left right eau76731 pass switch “ ” press this switch to flash the head- lights. Tip when the dimmer switch is set to “ ”, the passing switch has no effect. Eau66021 dimmer switch “ / ” set this switch to “ ”...

  • Page 25

    Instrument and control functions 5-5 1 2 3 4 5 6 7 8 9 10 11 12 tle cable is stuck. Eau66010 hazard switch “ ” with the key in the “on” or “ ” posi- tion, use this switch to turn on the haz- ard lights (simultaneous flashing of all turn signal lights). The hazard lights are used in case of an emerge...

  • Page 26

    Instrument and control functions 5-6 1 2 3 4 5 6 7 8 9 10 11 12 warning light may flicker when rid- ing on a slope or during sudden acceleration or deceleration, but this is not a malfunction.  if a problem is detected in the oil level detection circuit, the oil level warning light will flash repea...

  • Page 27

    Instrument and control functions 5-7 1 2 3 4 5 6 7 8 9 10 11 12 all, use extra caution to avoid possi- ble wheel lock during emergency braking. Have a yamaha dealer check the brake system and electri- cal circuits as soon as possible. Eau77001 traction control system indicator light “ ” in normal op...

  • Page 28

    Instrument and control functions 5-8 1 2 3 4 5 6 7 8 9 10 11 12 eau77051 multi-function meter unit warning ewa12423 be sure to stop the vehicle before making any setting changes to the multi-function meter unit. Changing settings while riding can distract the operator and increase the risk of an acc...

  • Page 29

    Instrument and control functions 5-9 1 2 3 4 5 6 7 8 9 10 11 12 speedometer the speedometer shows the vehicle’s traveling speed. Tachometer the tachometer allows the rider to monitor the engine speed and keep it within the ideal power range. Notice eca10032 do not operate the engine in the ta- chome...

  • Page 30

    Instrument and control functions 5-10 1 2 3 4 5 6 7 8 9 10 11 12 “f” (full) towards “e” (empty) as the fuel level decreases. When the last seg- ment starts flashing, refuel as soon as possible. Tip if a problem is detected in the electrical ciruit, the fuel level segments and “ ” will flash repeated...

  • Page 31

    Instrument and control functions 5-11 1 2 3 4 5 6 7 8 9 10 11 12 this display indicates which traction control system setting has been select- ed: “1”, “2” or “off”. For more details on the tcs settings and on how to se- lect them, see page 4-1. Multi-function display the multi-function display is e...

  • Page 32

    Instrument and control functions 5-12 1 2 3 4 5 6 7 8 9 10 11 12 then push the “reset” button for one second.  if you do not reset the fuel reserve tripmeter manually, it resets auto- matically and disappears after re- fueling and traveling 5 km (3 mi). Instantaneous fuel consumption mode the insta...

  • Page 33

    Instrument and control functions 5-13 1 2 3 4 5 6 7 8 9 10 11 12 coolant temperature mode this display shows the coolant temper- ature from 40 c to 116 c in 1 c incre- ments. If the message “hi” flashes, stop the vehicle, then stop the engine, and let the engine cool. (see page 8-40.) tip  when ...

  • Page 34

    Instrument and control functions 5-14 1 2 3 4 5 6 7 8 9 10 11 12 eau12822 clutch lever the clutch lever is located on the left side of the handlebar. To disengage the clutch, pull the lever toward the handlebar grip. To engage the clutch, release the lever. The lever should be pulled rapidly and rel...

  • Page 35

    Instrument and control functions 5-15 1 2 3 4 5 6 7 8 9 10 11 12 “ ” mark on the brake lever. Eau12944 brake pedal the brake pedal is located on the right side of the motorcycle. To apply the rear brake, press down on the brake pedal. Eau63040 abs the yamaha abs (anti-lock brake system) features a d...

  • Page 36

    Instrument and control functions 5-16 1 2 3 4 5 6 7 8 9 10 11 12 tip  the abs performs a self-diagno- sis test each time the vehicle first starts off after the key is turned to “on” and the vehicle has traveled at a speed of 10 km/h (6 mi/h) or higher. During this test, a “clicking” noise can be he...

  • Page 37

    Instrument and control functions 5-17 1 2 3 4 5 6 7 8 9 10 11 12 tip the fuel tank cap cannot be closed un- less the key is in the lock. In addition, the key cannot be removed if the cap is not properly closed and locked. Warning ewa11092 make sure that the fuel tank cap is properly closed after fil...

  • Page 38

    Instrument and control functions 5-18 1 2 3 4 5 6 7 8 9 10 11 12 your eyes, see your doctor immedi- ately. If gasoline spills on your skin, wash with soap and water. If gaso- line spills on your clothing, change your clothes. Eau58111 notice eca11401 use only unleaded gasoline. The use of leaded gas...

  • Page 39

    Instrument and control functions 5-19 1 2 3 4 5 6 7 8 9 10 11 12 eau13434 catalytic converter this model is equipped with a catalytic converter in the exhaust system. Warning ewa10863 the exhaust system is hot after op- eration. To prevent a fire hazard or burns:  do not park the vehicle near possi...

  • Page 40

    Instrument and control functions 5-20 1 2 3 4 5 6 7 8 9 10 11 12 2. Push the rear of the seat down to lock it in place. 3. Remove the key. Tip make sure that the seat is properly se- cured before riding. Eau77030 storage compartment the storage compartment is located under the seat. (see page 5-19.)...

  • Page 41

    Instrument and control functions 5-21 1 2 3 4 5 6 7 8 9 10 11 12 each fork leg in direction (b). The spring preload setting is deter- mined by measuring distance a, shown in the illustration. The shorter distance a is, the higher the spring preload; the longer distance a is, the lower the spring pre...

  • Page 42

    Instrument and control functions 5-22 1 2 3 4 5 6 7 8 9 10 11 12 soften the compression damping, turn the adjusting screw in direction (b). Tip be sure to perform this adjustment on the left front fork leg. Tip  although the total number of clicks of a damping force adjusting mechanism may not exac...

  • Page 43

    Instrument and control functions 5-23 1 2 3 4 5 6 7 8 9 10 11 12  align the appropriate notch in the adjusting ring with the position in- dicator on the shock absorber.  use the special wrench and the extension bar included in the own- er’s tool kit to make the adjust- ment. Rebound damping force ...

  • Page 44

    Instrument and control functions 5-24 1 2 3 4 5 6 7 8 9 10 11 12 worn-out shock absorber as- sembly yourself. Take the shock absorber assembly to a yamaha dealer for any service. Eau15152 luggage strap holders there is a luggage strap holder on each passenger footrest. Eau77390 auxiliary dc connecto...

  • Page 45

    Instrument and control functions 5-25 1 2 3 4 5 6 7 8 9 10 11 12 eau15306 sidestand the sidestand is located on the left side of the frame. Raise the sidestand or lower it with your foot while holding the vehicle upright. Tip the built-in sidestand switch is part of the ignition circuit cut-off syst...

  • Page 46

    Instrument and control functions 5-26 1 2 3 4 5 6 7 8 9 10 11 12 with the engine turned off: 1. Move the sidestand down. 2. Make sure that the start/engine stop switch is set to “ ”. 3. Turn the key on. 4. Shift the transmission into the neutral position. 5. Push the “ ” side of the start/engine sto...

  • Page 47

    6-1 1 2 3 4 5 6 7 8 9 10 11 12 for your safety – pre-operation checks eau15599 inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always follow the inspection and maintenance procedures and schedules described in the owner’s manual. Warning ewa11152 fa...

  • Page 48

    For your safety – pre-operation checks 6-2 1 2 3 4 5 6 7 8 9 10 11 12 rear brake • check operation. • if soft or spongy, have yamaha dealer bleed hydraulic system. • check brake pads for wear. • replace if necessary. • check fluid level in reservoir. • if necessary, add specified brake fluid to spec...

  • Page 49

    For your safety – pre-operation checks 6-3 1 2 3 4 5 6 7 8 9 10 11 12 instruments, lights, signals and switches • check operation. • correct if necessary. — sidestand switch • check operation of ignition circuit cut-off system. • if system is not working correctly, have yamaha dealer check vehicle. ...

  • Page 50

    7-1 1 2 3 4 5 6 7 8 9 10 11 12 operation and important riding points eau15952 read the owner’s manual carefully to become familiar with all controls. If there is a control or function you do not understand, ask your yamaha dealer. Warning ewa10272 failure to familiarize yourself with the controls ca...

  • Page 51

    Operation and important riding points 7-2 1 2 3 4 5 6 7 8 9 10 11 12 ing at a speed of 10 km/h (6 mi/h) or higher. The quick shift indicator light should come on when the key is turned to “on”, and then remain on after the engine is started. Notice eca22510 if a warning or indicator light does not w...

  • Page 52

    Operation and important riding points 7-3 1 2 3 4 5 6 7 8 9 10 11 12 notice eca23990  even with the transmission in the neutral position, do not coast for long periods of time with the engine off, and do not tow the motorcycle for long dis- tances. The transmission is properly lubricated only when ...

  • Page 53

    Operation and important riding points 7-4 1 2 3 4 5 6 7 8 9 10 11 12 r/min. 1600 km (1000 mi) and beyond the vehicle can now be operated nor- mally. Notice eca10311  keep the engine speed out of the tachometer red zone.  if any engine trouble should oc- cur during the engine break-in period, immed...

  • Page 54

    8-1 1 2 3 4 5 6 7 8 9 10 11 12 periodic maintenance and adjustment eau17246 periodic inspection, adjustment, and lu- brication will keep your vehicle in the safest and most efficient condition pos- sible. Safety is an obligation of the vehi- cle owner/operator. The most important points of vehicle i...

  • Page 55

    Periodic maintenance and adjustment 8-2 1 2 3 4 5 6 7 8 9 10 11 12 eau39692 owner’s tool kit the owner’s tool kit is located on the bottom of the seat. (see page 5-19.) the service information included in this manual and the tools provided in the owner’s tool kit are intended to assist you in the pe...

  • Page 56

    Periodic maintenance and adjustment 8-3 1 2 3 4 5 6 7 8 9 10 11 12 eau71030 tip  the annual checks must be performed every year, except if a kilometer-based maintenance, or for the uk, a mileage-based maintenance, is performed instead.  from 50000 km (30000 mi), repeat the maintenance intervals st...

  • Page 57

    Periodic maintenance and adjustment 8-4 1 2 3 4 5 6 7 8 9 10 11 12 7 * air induction system • check the air cut-off valve, reed valve, and hose for damage. • replace any damaged parts if necessary. No. Item check or maintenance job odometer reading annual check 1000 km (600 mi) 10000 km (6000 mi) 20...

  • Page 58

    Periodic maintenance and adjustment 8-5 1 2 3 4 5 6 7 8 9 10 11 12 eau71351 general maintenance and lubrication chart no. Item check or maintenance job odometer reading annual check 1000 km (600 mi) 10000 km (6000 mi) 20000 km (12000 mi) 30000 km (18000 mi) 40000 km (24000 mi) 1 * diagnostic system ...

  • Page 59

    Periodic maintenance and adjustment 8-6 1 2 3 4 5 6 7 8 9 10 11 12 12 drive chain • check chain slack, alignment and condition. • adjust and lubricate chain with a special o-ring chain lubricant thoroughly. Every 1000 km (600 mi) and after washing the motorcycle, riding in the rain or riding in wet ...

  • Page 60

    Periodic maintenance and adjustment 8-7 1 2 3 4 5 6 7 8 9 10 11 12 23 * rear suspension relay arm and connecting arm pivoting points • check operation. 24 engine oil • change (warm engine before draining). • check oil level and vehicle for oil leakage. 25 engine oil filter cartridge • replace. 26 * ...

  • Page 61

    Periodic maintenance and adjustment 8-8 1 2 3 4 5 6 7 8 9 10 11 12 eau72800 tip  air filter • this model’s air filter is equipped with a disposable oil-coated paper element, which must not be cleaned with com- pressed air to avoid damaging it. • the air filter element needs to be replaced more freq...

  • Page 62

    Periodic maintenance and adjustment 8-9 1 2 3 4 5 6 7 8 9 10 11 12 eau18773 removing and installing panels the panels shown need to be removed to perform some of the maintenance jobs described in this chapter. Refer to this section each time a panel needs to be removed and installed. Eau76761 panel ...

  • Page 63

    Periodic maintenance and adjustment 8-10 1 2 3 4 5 6 7 8 9 10 11 12 panel b to remove the panel 1. Remove the bolts and washers. 2. Pull the panel outward as shown. To install the panel place the panel in the original position, and then install the washers and bolts. Eau19653 checking the spark plug...

  • Page 64

    Periodic maintenance and adjustment 8-11 1 2 3 4 5 6 7 8 9 10 11 12 before installing a spark plug, the spark plug gap should be measured with a wire thickness gauge and, if necessary, adjusted to specification. Clean the surface of the spark plug gasket and its mating surface, and then wipe off any...

  • Page 65

    Periodic maintenance and adjustment 8-12 1 2 3 4 5 6 7 8 9 10 11 12 eau1990c engine oil and oil filter cartridge the engine oil level should be checked before each ride. In addition, the oil must be changed and the oil filter car- tridge replaced at the intervals speci- fied in the periodic maintena...

  • Page 66

    Periodic maintenance and adjustment 8-13 1 2 3 4 5 6 7 8 9 10 11 12 tip skip steps 5–7 if the oil filter cartridge is not being replaced. 5. Remove the oil filter cartridge with an oil filter wrench. Tip an oil filter wrench is available at a yamaha dealer. 6. Apply a thin coat of clean engine oil t...

  • Page 67

    Periodic maintenance and adjustment 8-14 1 2 3 4 5 6 7 8 9 10 11 12 8. Install the engine oil drain bolt and its new gasket, and then tighten the bolt to the specified torque. 9. Refill with the specified amount of the recommended engine oil. Tip be sure to wipe off spilled oil on any parts after th...

  • Page 68

    Periodic maintenance and adjustment 8-15 1 2 3 4 5 6 7 8 9 10 11 12 correct, immediately turn the engine off and have a yamaha dealer check the vehicle. 13. Turn the engine off, wait a few min- utes until the oil settles, and then check the oil level and correct it if necessary. Eau20071 coolant the...

  • Page 69

    Periodic maintenance and adjustment 8-16 1 2 3 4 5 6 7 8 9 10 11 12 4. Add coolant to the maximum level mark, and then install the reservoir cap. Notice: if coolant is not available, use distilled water or soft tap water instead. Do not use hard water or salt water since it is harmful to the engine....

  • Page 70

    Periodic maintenance and adjustment 8-17 1 2 3 4 5 6 7 8 9 10 11 12 6. Remove the coolant reservoir cap. 7. Drain the coolant from the coolant reservoir by turning it upside down. 8. Install the coolant reservoir and its cover by placing them in the origi- nal position, and then installing the colla...

  • Page 71

    Periodic maintenance and adjustment 8-18 1 2 3 4 5 6 7 8 9 10 11 12 to the maximum level mark, and then install the cap. 18. Start the engine, and then check the vehicle for coolant leakage. If coolant is leaking, have a yamaha dealer check the cooling system. 19. Install the panel. Eau36765 air fil...

  • Page 72

    Periodic maintenance and adjustment 8-19 1 2 3 4 5 6 7 8 9 10 11 12 eau21386 checking the throttle grip free play measure the throttle grip free play as shown. Periodically check the throttle grip free play and, if necessary, have a yamaha dealer adjust it. Eau21402 valve clearance the valve clearan...

  • Page 73

    Periodic maintenance and adjustment 8-20 1 2 3 4 5 6 7 8 9 10 11 12 weight of rider, passenger, car- go, and accessories approved for this model. Warning ewa10512 never overload your vehicle. Opera- tion of an overloaded vehicle could cause an accident. Tire inspection the tires must be checked befo...

  • Page 74

    Periodic maintenance and adjustment 8-21 1 2 3 4 5 6 7 8 9 10 11 12 tire information this model is equipped with tubeless tires and tire air valves. Tires age, even if they have not been used or have only been used occasion- ally. Cracking of the tread and sidewall rubber, sometimes accompanied by c...

  • Page 75

    Periodic maintenance and adjustment 8-22 1 2 3 4 5 6 7 8 9 10 11 12 eau21963 cast wheels to maximize the performance, durabil- ity, and safe operation of your vehicle, note the following points regarding the specified wheels.  the wheel rims should be checked for cracks, bends, warpage or oth- er d...

  • Page 76

    Periodic maintenance and adjustment 8-23 1 2 3 4 5 6 7 8 9 10 11 12 eau37914 checking the brake lever free play there should be no free play at the brake lever end. If there is free play, have a yamaha dealer inspect the brake system. Warning ewa14212 a soft or spongy feeling in the brake lever can ...

  • Page 77

    Periodic maintenance and adjustment 8-24 1 2 3 4 5 6 7 8 9 10 11 12 eau22393 checking the front and rear brake pads the front and rear brake pads must be checked for wear at the intervals spec- ified in the periodic maintenance and lubrication chart. Eau36891 front brake pads each front brake pad is...

  • Page 78

    Periodic maintenance and adjustment 8-25 1 2 3 4 5 6 7 8 9 10 11 12 rear brake warning ewa16011 improper maintenance can result in loss of braking ability. Observe these precautions:  insufficient brake fluid may al- low air to enter the brake sys- tem, reducing braking performance.  clean the fil...

  • Page 79

    Periodic maintenance and adjustment 8-26 1 2 3 4 5 6 7 8 9 10 11 12 eau22733 changing the brake fluid have a yamaha dealer change the brake fluid at the intervals specified in the periodic maintenance and lubrica- tion chart. In addition, have the oil seals of the master cylinders and calipers as we...

  • Page 80

    Periodic maintenance and adjustment 8-27 1 2 3 4 5 6 7 8 9 10 11 12 eau57971 to adjust the drive chain slack consult a yamaha dealer before ad- justing the drive chain slack. 1. Loosen the axle nut and the lock- nut on each side of the swingarm. 2. To tighten the drive chain, turn the drive chain sl...

  • Page 81

    Periodic maintenance and adjustment 8-28 1 2 3 4 5 6 7 8 9 10 11 12 eau23026 cleaning and lubricating the drive chain the drive chain must be cleaned and lubricated at the intervals specified in the periodic maintenance and lubrica- tion chart, otherwise it will quickly wear out, especially when rid...

  • Page 82

    Periodic maintenance and adjustment 8-29 1 2 3 4 5 6 7 8 9 10 11 12 eau23115 checking and lubricating the throttle grip and cable the operation of the throttle grip should be checked before each ride. In addi- tion, the cable should be lubricated by a yamaha dealer at the intervals speci- fied in th...

  • Page 83

    Periodic maintenance and adjustment 8-30 1 2 3 4 5 6 7 8 9 10 11 12 eau23144 checking and lubricating the brake and clutch levers the operation of the brake and clutch levers should be checked before each ride, and the lever pivots should be lu- bricated if necessary. Brake lever clutch lever eau232...

  • Page 84

    Periodic maintenance and adjustment 8-31 1 2 3 4 5 6 7 8 9 10 11 12 eaum1653 lubricating the swingarm pivots the swingarm pivots must be lubricat- ed by a yamaha dealer at the intervals specified in the periodic maintenance and lubrication chart. Eau23273 checking the front fork the condition and op...

  • Page 85

    Periodic maintenance and adjustment 8-32 1 2 3 4 5 6 7 8 9 10 11 12 eau23285 checking the steering worn or loose steering bearings may cause danger. Therefore, the operation of the steering must be checked as fol- lows at the intervals specified in the pe- riodic maintenance and lubrication chart. 1...

  • Page 86

    Periodic maintenance and adjustment 8-33 1 2 3 4 5 6 7 8 9 10 11 12 skin, eyes or clothing and al- ways shield your eyes when working near batteries. In case of contact, administer the fol- lowing first aid. • external: flush with plenty of water. • internal: drink large quan- tities of water or mil...

  • Page 87

    Periodic maintenance and adjustment 8-34 1 2 3 4 5 6 7 8 9 10 11 12 eau76770 replacing the fuses fuse box 1 is located behind panel a. (see page 8-9.) the main fuse, the fuel injection system fuse, and fuse box 2 are located under the seat. (see page 5-19.) 1. Fuse box 1 1 1. Ignition fuse 2. Abs co...

  • Page 88

    Periodic maintenance and adjustment 8-35 1 2 3 4 5 6 7 8 9 10 11 12 tip to access the fuel injection system fuse, remove the starter relay cover by pulling it upward. If a fuse is blown, replace it as follows. 1. Turn the key to “off” and turn off the electrical circuit in question. 2. Remove the bl...

  • Page 89

    Periodic maintenance and adjustment 8-36 1 2 3 4 5 6 7 8 9 10 11 12 check if the device operates. 4. If the fuse immediately blows again, have a yamaha dealer check the electrical system. Eau76271 vehicle lights except for the turn signal lights, this model is equipped with full-led light- ing. If a...

  • Page 90

    Periodic maintenance and adjustment 8-37 1 2 3 4 5 6 7 8 9 10 11 12 eau24205 replacing a turn signal light bulb 1. Remove the turn signal light lens by removing the screw. 2. Remove the burnt-out bulb by pushing it in and turning it counter- clockwise. 3. Insert a new bulb into the socket, push it i...

  • Page 91

    Periodic maintenance and adjustment 8-38 1 2 3 4 5 6 7 8 9 10 11 12 eau25872 troubleshooting although yamaha motorcycles receive a thorough inspection before shipment from the factory, trouble may occur dur- ing operation. Any problem in the fuel, compression, or ignition systems, for example, can c...

  • Page 92

    Periodic maintenance and adjustment 8-39 1 2 3 4 5 6 7 8 9 10 11 12 eau42365 troubleshooting charts starting problems or poor engine performance check the fuel level in the fuel tank. 1. Fuel there is enough fuel. There is no fuel. Check the battery. Supply fuel. The engine does not start. Check the...

  • Page 93

    Periodic maintenance and adjustment 8-40 1 2 3 4 5 6 7 8 9 10 11 12 engine overheating warning ewa10401  do not remove the radiator cap when the engine and radiator are hot. Scalding hot fluid and steam may be blown out under pressure, which could cause serious injury. Be sure to wait until the eng...

  • Page 94: Motorcycle Care and Storage

    9-1 1 2 3 4 5 6 7 8 9 10 11 12 motorcycle care and storage eau37834 matte color caution notice eca15193 some models are equipped with matte colored finished parts. Be sure to consult a yamaha dealer for advice on what products to use be- fore cleaning the vehicle. Using a brush, harsh chemical produ...

  • Page 95: Motorcycle Care and Storage

    Motorcycle care and storage 9-2 1 2 3 4 5 6 7 8 9 10 11 12 off any detergent residue using plenty of water, as it is harmful to plastic parts.  do not use any harsh chemical products on plastic parts. Be sure to avoid using cloths or sponges which have been in contact with strong or abrasive cleani...

  • Page 96: Motorcycle Care and Storage

    Motorcycle care and storage 9-3 1 2 3 4 5 6 7 8 9 10 11 12 including chrome- and nickel-plat- ed, surfaces. 5. Use spray oil as a universal clean- er to remove any remaining dirt. 6. Touch up minor paint damage caused by stones, etc. 7. Wax all painted surfaces. 8. Let the motorcycle dry completely ...

  • Page 97: Motorcycle Care and Storage

    Motorcycle care and storage 9-4 1 2 3 4 5 6 7 8 9 10 11 12 2. Fill up the fuel tank and add fuel stabilizer (if available) to prevent the fuel tank from rusting and the fuel from deteriorating. 3. Perform the following steps to pro- tect the cylinders, piston rings, etc. From corrosion. A. Remove th...

  • Page 98: Specifications

    10-1 1 2 3 4 5 6 7 8 9 10 11 12 specifications eau69998 dimensions: overall length: 2075 mm (81.7 in) overall width: 815 mm (32.1 in) overall height: 1120 mm (44.1 in) seat height: 820 mm (32.3 in) wheelbase: 1440 mm (56.7 in) ground clearance: 135 mm (5.31 in) minimum turning radius: 3.0 m (9.84 ft...

  • Page 99: Specifications

    Specifications 10-2 1 2 3 4 5 6 7 8 9 10 11 12 6th: 1.037 (28/27) chassis: frame type: diamond caster angle: 25.0 trail: 103 mm (4.1 in) front tire: type: tubeless size: 120/70 zr17 m/c (58w) manufacturer/model: bridgestone/s20f manufacturer/model: dunlop/d214f rear tire: type: tubeless size: 180/55...

  • Page 100: Specifications

    Specifications 10-3 1 2 3 4 5 6 7 8 9 10 11 12 brake/tail light: led front turn signal light: 10.0 w rear turn signal light: 10.0 w auxiliary light: led license plate light: led meter lighting: led neutral indicator light: led high beam indicator light: led oil level warning light: led turn signal i...

  • Page 101: Consumer Information

    11-1 1 2 3 4 5 6 7 8 9 10 11 12 consumer information eau53562 identification numbers record the vehicle identification num- ber, engine serial number, and the model label information in the spaces provided below. These identification numbers are needed when registering the vehicle with the authoriti...

  • Page 102: Consumer Information

    Consumer information 11-2 1 2 3 4 5 6 7 8 9 10 11 12 eau26481 model label the model label is affixed to the frame under the seat. (see page 5-19.) re- cord the information on this label in the space provided. This information will be needed when ordering spare parts from a yamaha dealer. Eau69910 di...

  • Page 103: Consumer Information

    Consumer information 11-3 1 2 3 4 5 6 7 8 9 10 11 12 eau26571 motorcycle noise regulation (for australia) tampering with noise con- trol system prohibited: owners are warned that the law may prohibit:  the removal or rendering inopera- tive by any person other than for purposes of maintenance, repa...

  • Page 104: Index

    12-1 1 2 3 4 5 6 7 8 9 10 11 12 index a abs....................................................... 5-15 abs warning light.................................... 5-6 air filter element .................................... 8-18 auxiliary dc connectors........................ 5-24 b battery..................

  • Page 105: Index

    Index 1 2 3 4 5 6 7 8 9 10 11 12 12-2 t throttle grip and cable, checking and lubricating ........................................... 8-29 throttle grip free play, checking ........... 8-19 tires...................................................... 8-19 tool kit .......................................

  • Page 106

    Bs2-28199-20.Book 3 ページ 2016年9月29日 木曜日 午後5時15分.

  • Page 107

    Bs2-9-20_oce_brazil-e_hyoshi.Indd 3 2016/09/29 17:13:59.

  • Page 108

    Printed on recycled paper printed in japan 2016.10-0.3×1 ! (e) bs2-9-20_oce_brazil-e_hyoshi.Indd 4 2016/09/29 17:13:59.