1. DL manuals
  2. Yamaha
  3. Speaker System
  4. NS-P270
  5. Owner's Manual

Yamaha NS-P270 Owner's Manual

Other manuals for NS-P270: Owner's Manual, Service Manual, Specification
Manual is about: HOME CINEMA 5.1CH

Summary of NS-P270

  • Page 1

    I ns-p270/ ns-p276 (ns-p270 / ns-p276: nx-e270 + nx-c270 + sw-p270) owner’s manual ub 00_ns-p270/276_ub.Book page i friday, december 2, 2005 4:36 pm.

  • Page 2

    I important safety instructions • explanation of graphic symbols: the lightning flash with arrowhead symbol within an equilateral triangle is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a ri...

  • Page 3

    Ii for u.K. Customers if the socket outlets in the home are not suitable for the plug supplied with this appliance, the plug should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note: the plug severed from the mains lead must be destroyed, a...

  • Page 4: Precautions

    Iii precautions 1 to assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 install the speakers in a cool, dry, clean place – away from windows, sources of heat, sources of excessive vibration, dust, moisture or cold. Avoid sources of elect...

  • Page 5: Table of Contents

    1 • voltage selector (for china, korea, asia and general models) the voltage selector switch on the rear panel of this unit must be set for your local main voltage before plugging this unit into the ac main supply. Voltages are 110-120/220-240 v ac, 50/60 hz. Table of contents precautions . . . . . ...

  • Page 6: Introduction

    2 introduction thank you for choosing a yamaha ns-p270 or ns-p276 home cinema 5.1/6.1 channel speaker system. Each of these systems includes the following speakers: • nx-e270 the nx-e270 are full-range acoustic-suspension speakers. Each system includes two (2) front and two (2) surround speakers. In...

  • Page 7: Setting Up The Speakers

    3 setting up the speakers before you connect the speakers, place each speaker in its respective location. Speaker positioning is very important as it affects the overall sound quality of the system. Place the speakers in locations that will optimize the sound quality at your listening position. Refe...

  • Page 8: (Nx-C270)

    4 positioning the center speaker (nx-c270) place the center speaker precisely between the front speakers, facing directly forward. You can place the center speaker on top of a tv (if the top of the tv is flat), on the floor beneath the tv, or in an entertainment center. Be sure to place the speaker ...

  • Page 9: Speakers

    5 mounting the front and surround speakers you can place the front and surround speakers (and surround back speaker in an ns-p276 system) on a shelf or rack, set them on the floor, or mount them on a wall or speaker stand. To mount the speakers on a wall: 1. Affix screws to a firm wall or wall suppo...

  • Page 10: Connections

    6 connections caution: plug the power cables for the subwoofer and other audio/video components into an ac outlet only after you complete all other connections. Basic connection example to ac outlet center speaker surround back speaker (in ns-p276 systems) subwoofer amplifier front speakers surround...

  • Page 11: Connecting Speaker Cables

    7 connecting speaker cables keep the speaker cables as short as possible. Do not bundle or roll up excess cable. If the connections are faulty, you will hear no sound from the speakers. Before connecting the cables: remove a small amount (about 10 mm) of insulation coating from the end of each speak...

  • Page 12: Pre-Adjusting The Subwoofer

    8 using the subwoofer (sw-p270) 1 power indicator lights up in green when the power switch ( 4 ) is turned on ; turns off when the power switch is turned off . 2 volume control adjusts the volume level. Turn the control clockwise to increase the volume, and counterclockwise to decrease the volume. 3...

  • Page 13

    9 advanced yamaha active servo technology (on the sw-p270) the theory behind yamaha active servo technology is based on two factors: the helmholtz resonator and negative-impedance drive. Active servo processing speakers reproduce the bass frequencies through an “air woofer,” which is a port or openi...

  • Page 14: Troubleshooting

    10 troubleshooting refer to the chart below if the unit does not function properly. If the problem you are experiencing is not listed, or if the instructions fail to help you resolve the problem, disconnect the power cord and contact your authorized yamaha dealer or service center. For the subwoofer...

  • Page 15: Specifications

    11 specifications frequency characteristics the following graph displays the frequency characteristics of the sw-p270 subwoofer. The following graph displays the frequency characteristics of the sw-p270 subwoofer combined with nx-e270 speakers. Nx-e270/nx-c270 type .........Full-range acoustic-suspe...

  • Page 16

    2006 all rights reserved. Yamaha electronics corporation, usa 6660 orangethorpe ave., buena park, calif. 90620, u.S.A. Yamaha canada music ltd. 135 milner ave., scarborough, ontario m1s 3r1, canada yamaha electronik europa g.M.B.H. Siemensstr. 22-34, 25462 rellingen bei hamburg, germany yamaha elect...