Yamaha Portatone PSR-520 Owner's Manual - page 17

16

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Playing the PSR-520

Function

Description

Split

Voice

The split voice can be changed as required while the number

and name of the current split voice appear on the top line of

the display.

S.Volume

Sets the volume of the split voice so you can create the opti-

mum blend with the right-hand voice. The volume range is

from “00” (no sound) to “127” (maximum split voice volume).

S.Octave

Shifts the pitch of the split voice up or down one or two oc-

taves. “–1” is down one octave, “–2” is down two octaves; “+1”

and “+2” are up one and two octaves, respectively.

S.RevLvl

Sets the reverb send level for the split voice. The reverb send

level determines the amount of signals input to the reverb

effect. The level range is from “00” (no effect) to “127” (maxi-

mum effect).

S.ChoLvl

Sets the chorus send level for the split voice. The chorus send

level determines the amount of signals input to the chorus

effect. The level range is from “00” (no effect) to “127” (maxi-

mum effect).

S.Pan

Positions the split voice in the stereo sound field. The pan

range is from “–7” to “+7”. “–7” is full left and “+7” is full right.

S.Split

Sets the keyboard split point — i.e. the key that separates the

left- and right-hand voices (the split-point key is included in the

left-hand section of the keyboard). Simply press the key you

want to assign as the split point. The key number of the key

you press will appear to the left of “S.Split” on the top line of

the display. You can also use the [–/NO] and [+/YES] buttons,

the number buttons or the data dial to enter the split point key

number. The lowest key on the keyboard (C1) is key number

“36”, middle C (C3) is “60”, and the highest key (C6) is 96. The

split point can be set at any key number from 00 through 127,

allowing the split point to be set outside the range of the PSR-

520 keyboard for MIDI applications. The default split point is

59 (B2).

CURSOR

–/NO

+/YES

6

5

4

0

7

8

9

1

2

3

1– –

*

*

• If the Voice Set function is ON

(page 69), the Split Voice param-

eters will change automatically

whenever a different keyboard

voice is selected.

• The selected Split Voice param-

eter can be reset to its default

value by simultaneously pressing

the [–/NO] and [+/YES] buttons.

• Negative values with “S.Octave”

and “S.Pan” parameters can be

entered by pressing the number

buttons while holding the [–/NO]

button.

• Reverb return level and chorus

return level can be changed via

the “RevRtnLv” and “ChoRtnLv”

function in the DIGITAL EFFECT

function — see pages 25 and 27.

3

Exit

.........................................................................................................................................................................................

Press the [VOICE] button or select a different function to exit from the

SPLIT VOICE function.