Yamaha Portatone PSR-5700 Owner's Manual - Warning-
184
WARNING-
When using any electrical or electronic product, basic
precautions should always be followed. These precautions include, but
are not limited to, the following:
1.
Read all Safety Instructions, Installation Instructions, Special
Message Section items, and any Assembly Instructions found in this
manual BEFORE marking any connections, including connection to
the main supply.
2.
Main Power Supply Verification: Yamaha products are manu-
factured specifically for the supply voltage in the area where they are
to be sold. If you should move, or if any doubt exists about the supply
voltage in your area, please contact your dealer for supply voltage
verification and (if applicable) instructions. The required supply volt-
age is printed on the name plate. For name plate location, please refer
to the graphic found in the Special Message Section of this manual.
3.
This product may be equipped with a polarized plug (one blade
wider than the other). If you are unable to insert the plug into the out-
let, turn the plug over and try again. If the problem persists, contact an
electrician to have the obsolete outlet replaced. Do NOT defeat the
safety purpose of the plug.
4.
Some electronic products utilize external power supplies or
adapters. Do NOT connect this type of product to any power supply or
adapter other than one described in the owners manual, on the name
plate, or specifically recommended by Yamaha.
5.
WARNING: Do not place this product or any other objects on
the power cord or place it in a position where anyone could walk on,
trip over, or roll anything over power or connecting cords of any kind.
The use of an extension cord is not recommended! If you must use an
extension cord, the minimum wire size for a 25' cord (or less) is 18
AWG. NOTE: The smaller the AWG number, the larger the current
handling capacity. For longer extension cords, consult a local electri-
cian.
6.
Ventilation: Electronic products, unless specifically designed
for enclosed installations, should be placed in locations that do not
interfere with proper ventilation. If instructions for enclosed installa-
tions are not provided, it must be assumed that unobstructed ventilation
is required.
7.
Temperature considerations: Electronic products should be
installed in locations that do not significantly contribute to their operat-
ing temperature. Placement of this product close to heat sources such
as; radiators, heat registers and other devices that produce heat should
be avoided.
IMPORTANT SAFETY INSTRUCTIONS
8.
This product was NOT designed for use in wet/damp locations
and should not be used near water or exposed to rain. Examples of wet/
damp locations are; near a swimming pool, spa, tub, sink, or wet base-
ment.
9.
This product should be used only with the components sup-
plied or; a cart, rack, or stand that is recommended by the manufac-
turer. If a cart, rack, or stand is used, please observe all safety markings
and instructions that accompany the accessory product.
10.
The power supply cord (plug) should be disconnected from the
outlet when electronic products are to be left unused for extended
periods of time. Cords should also be disconnected when there is a
high probability of lightening and/or electrical storm activity.
11.
Care should be taken that objects do not fall and liquids are not
spilled into the enclosure through any openings that may exist.
12.
Electrical/electronic products should be serviced by a qualified
service person when:
a. The power supply cord has been damaged; or
b. Objects have fallen, been inserted, or liquids have been
spilled into the enclosure through openings; or
c. The product has been exposed to rain: or
d. The product dose not operate, exhibits a marked change in
performance; or
e. The product has been dropped, or the enclosure of the prod-
uct has been damaged.
13.
Do not attempt to service this product beyond that described in
the user-maintenance instructions. All other servicing should be re-
ferred to qualified service personnel.
14.
This product, either alone or in combination with an amplifier
and headphones or speaker/s, may be capable of producing sound
levels that could cause permanent hearing loss. DO NOT operate for a
long period of time at a high volume level or at a level that is uncom-
fortable. If you experience any hearing loss or ringing in the ears, you
should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period be-
fore damage occurs.
15.
Some Yamaha products may have benches and/or accessory
mounting fixtures that are either supplied as a part of the product or as
optional accessories. Some of these items are designed to be dealer
assembled or installed. Please make sure that benches are stable and
any optional fixtures (where applicable) are well secured BEFORE
using. Benches supplied by Yamaha are designed for seating only. No
other uses are recommended.
92-469-2
PLEASE KEEP THIS MANUAL
INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK,
AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.