Yamaha PW-SE series Original Instructions Manual - page 38

35

BATTERY PACK AND CHARGING PROCEDURE

WARNING

If a charging fault occurs during charging, remove the 

power plug of the battery charger from the socket and 

wait for the battery pack/battery charger to cool.

[CHARGING THE BATTERY PACK MOUNTED ON THE 

BICYCLE] (Rear carrier type)

1. Connect the power plug of the battery charger to a 

household power outlet.

2.  Remove the lid of the battery holder cover and the cap 

of charging inlet from the charging connector on the 

battery pack, and connect it to the charging plug on the 

battery charger.

[CHARGING THE BATTERY PACK MOUNTED ON THE 

BICYCLE] (Down tube type)

1. Connect the power plug of the battery charger to a 

household power outlet.

2. Remove the cap of charging inlet from the charging 

connector on the battery pack, and connect it to the 

charging plug on the battery charger.

NOTICE

•  Do not connect the charging plug of the battery 

charger with the charging connector of the battery 

in a wet state.

•  Be sure to connect the charging plug only after the 

charging connector on the battery pack is com-

pletely dry.

Otherwise the battery charger and battery may mal-

function.

•  Do not apply excessive force to the charging plug 

or pull on the cord with the charging plug connect-

ed to the battery.

Otherwise, the plug or connector may be damaged.