Yamaha RAPTOR YFM660RP Owner's Manual - page 143
of
180
8-34
There are alignment marks on each side of
the swingarm and on the hub. Use them to
check for proper wheel axle alignment.
1. Locknut (
× 2)
2. Adjusting bolt (
× 2)
3. Alignment marks
3. After adjusting, tighten the adjusting bolt
locknuts and the wheel hub nuts to the
specified torques.
Tightening torque:
Locknut:
16 Nm (1.6 m·kgf, 12 ft·lb)
Upper wheel hub nut:
90 Nm (9.0 m·kgf, 65 ft·lb)
Lower wheel hub nut:
90 Nm (9.0 m·kgf, 65 ft·lb)