En owner’s manual keep this manual for future reference..
Owner’s manual 2 contents precautions................................... 5 introduction .................................... 7 features .............................................................7 firmware updates ..............................................7 precautions for rack mounting .........
Owner’s manual 3 the above warning is located on the top of the unit. Explanation of graphical symbols the lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be ...
Owner’s manual 4 1. Important notice: do not modify this unit! This product, when installed as indicated in the instructions con- tained in this manual, meets fcc requirements. Modifications not expressly approved by yamaha may void your authority, granted by the fcc, to use the product. 2. Importan...
Owner’s manual 5 precautions please read carefully before proceeding * please keep this manual in a safe place for future reference. Warning always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fir...
Owner’s manual 6 notice to avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below. • do not use the device in the vicinity of a tv, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the device, tv,...
Introduction owner’s manual 7 introduction thank you for choosing the yamaha rio3224-d/rio1608-d i/o rack. The rio3224-d is a dante-compatible i/o rack, featuring 32 analog inputs, 16 analog outputs, and 8 aes/ebu outputs. The rio1608-d is a dante-compatible i/o rack, featuring16 analog inputs and 8...
About dante owner’s manual 8 recessed installation if you want to recess the front panel surface of the device from the front edge of the rack, you can adjust the position of the rack mount brackets to recess the device by 50mm or 100mm, as shown in the illustration below. Note when you install the ...
Controls and functions owner’s manual 9 controls and functions front panel 1 [input] connectors 1–32 {1–16} these are the xlr-3-31 type analog balanced connectors for the input channels. The input level range is from –62 dbu to +10 dbu. +48v phantom power can be supplied to devices that require it v...
Controls and functions owner’s manual 10 6 dip switches these switches enable you to specify the settings related to the startup operation of the unit. Set the dip switches while the power to the unit is turned off. Otherwise, the setting will not be effective. Refer to the following for details. • ...
Controls and functions owner’s manual 11 7 [system] indicators these indicators show the rio’s operating status. If the green indicator lights steadily and the red indicator turns off, the unit is operating normally. When power to the unit is turned on, if the green indicator turns off, or if the re...
Controls and functions owner’s manual 12 rear panel d [primary]/[secondary] connectors the rio can be connected to other dante-compatible devices (such as a cl-series product) via these ethercon (rj45) connectors using standard ethernet cables (cat5e or better recommended). If dip switch 4 on the fr...
About connections owner’s manual 13 about connections there are two ways to connect the rio to a dante network. Daisy chain network a daisy chain is a wiring scheme in which multiple devices are connected together in sequence. In this way, networking is simple and requires no network switches. This ...
About connections owner’s manual 14 about dante controller dante controller is a software application that allows configuration and audio routing of dante networks. Use this application if you plan to connect or set up dante-enabled devices that do not feature rio-native support. Please download the...
Head amp control owner’s manual 15 head amp control the rio head amplifiers can be remotely controlled from a host device, such as a compatible yamaha digital mixing console. Control from an rio-native device the rio head amplifiers can be controlled remotely from an rio-native digital mixing consol...
Troubleshooting owner’s manual 16 troubleshooting troubleshooting symptom cause possible solution the power won’t turn on. The power indicator doesn’t light. The power cable is connected improperly. Connect the power cable properly (see page 12). The [power] switch is not turned on. Turn the [power]...
Troubleshooting owner’s manual 17 messages errors, warnings, and certain other types of information are displayed via the rio front panel indicators. Messages are also displayed in the dante controller error status field. Each indicator lights or flashes as described below: error messages when an er...
Specifications owner’s manual 18 specifications general specifications *1. Total harmonic distortion is measured with 18db/octave filter @80khz *2. Hum & noise are measured with a-weight filter. *3. Crosstalk is measured with a 30db/octave filter @22khz *4. Including rubber feet. Sampling frequency ...
Specifications owner’s manual 19 analog input characteristics *1. Xlr-3-31 type connectors are balanced.(1=gnd, 2=hot, 3=cold) *2. Rio3224-d only * in these specifications, 0dbu = 0.775 vrms. * all input ad converters are 24bit linear, 128times oversampling. * +48v dc ( phantom power ) is supplied t...
Specifications owner’s manual 20 dimensions unit: mm * specifications and descriptions in this owner’s manual are for information purposes only. Yamaha corp. Reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options...
Specifications owner’s manual 21 memo.
For details of products, please contact your nearest yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. Die einzelheiten zu produkten sind ...
204ipto-a0 © 2012 yamaha corporation c.S.G., pro audio division printed in japan zc87060 yamaha manual library http://www.Yamaha.Co.Jp/manual/ yamaha pro audio global web site http://www.Yamahaproaudio.Com/.