Yamaha RX-E100 Service Manual

RX-E100

RX-E100

SERVICE MANUAL

■ 

CONTENTS

TO SERVICE PERSONNEL  . . . . . . . . . . . . . . . . . . . . 1

FRONT PANELS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

REAR PANELS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

SPECIFICATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

INTERNAL VIEW  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

DISASSEMBLY PROCEDURES  . . . . . . . . . . . . . . . . . 5

TEST MODE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6—7

AMP ADJUSTMENTS  . . . . . . . . . . . . . . . . . . . . . . . . . 7

TUNER ADJUSTMENTS  . . . . . . . . . . . . . . . . . . . 8—10

IC DATA  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11—13

BLOCK DIAGRAM  . . . . . . . . . . . . . . . . . . . . . . . 14—15

PRINTED CIRCUIT BOARD  . . . . . . . . . . . . . . . 16—24

PIN CONNECTION DIAGRAM  . . . . . . . . . . . . . . . . . 25

SCHEMATIC DIAGRAM  . . . . . . . . . . . . . . . . . . 26—28

REMOTE CONTROL TRANSMITTER  . . . . . . . . . . . . 29

PARTS LIST  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30—38

SYSTEM CONTROL  . . . . . . . . . . . . . . . . . . . . . 39—48

NX-E100  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.

It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already

known and understood by the users, and have therefore not been restated.

WARNING:

Failure to follow appropriate service and safety procedures when servicing this product  may result in personal

injury, destruction of expensive components, and failure of the  product to perform as specified. For these reasons,

we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA

Retailer or the appointed service representative.

IMPORTANT:

The presentation or sale of this manual to any individual or firm does not constitute authorization,  certification  or

recognition  of  any  applicable  technical  capabilities,  or establish a principle-agent relationship of any form.

The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover.  The research, engineering, and service

departments of YAMAHA are continually striving  to improve YAMAHA products. Modifications are, therefore, inevitable and

specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the

distributor's Service Division.

WARNING:

Static discharges can destroy expensive components. Discharge any static electricity your body may have

accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).

IMPORTANT:

Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.

IMPORTANT NOTICE

1 0 0 6 8 4

SERVICE MANUAL

RX-E100/

NX-E100

MINI COMPONENT SYSTEM 

CRX-E100

CRX-E100 is composed of RX-E100 and CDX-E100.

This is a service manual for the RX-E100 (including NX-E100).

For service manuals of CDX-E100, please refer to the service manuals with the following

publication numbers :

CDX-E100

100685