Yamaha Silent Guitar SLG-100N Owner's Manual

Other manuals for Silent Guitar SLG-100N: Specifications, Service Manual, Service Manual
Manual is about: Silent Guitar

Summary of Silent Guitar SLG-100N

  • Page 1

    1 thank you for purchasing the yamaha silent guitar. In order to obtain the maxi- mum performance and enjoyment from your silent guitar, we urge you to read this owner’s manual thoroughly before using the instrument. Please keep this owner’s manual in a safe place for later reference. Contents preca...

  • Page 2

    2 special message section 92-bp this product utilizes batteries or an external power supply (adaptor). Do not connect this product to any power supply or adaptor other than one described in the manual, on the name plate, or specifically recommended by yamaha. This product should be used only with th...

  • Page 3

    3 your silent guitar will give you years of reliable service if you follow the simple rules given below: ■ location do not expose it to the following conditions to avoid deformation, discoloration, or more serious dam- age. • direct sunlight (e.G. Near a window). • high temperatures (e.G. Near a hea...

  • Page 4: Main Body/accessories

    4 main body/accessories after opening the packaging, please check that all the parts listed below are in- cluded. • main body • left frame • ac adaptor : pa-d09 • stereo earphones • soft case * slg-120nw only 02_slg100n_120nw_en.Pm65 06.8.22, 11:21 am 4.

  • Page 5: Nomenclature

    5 nomenclature ● front ● rear fingerboard neck saddle tuning peg nut body pickup (underneath the saddle) controls → see page 6. Frame attachment screw 1 (doubles as the strap pin) left frame (removable) right frame (fixed) bridge horn (leg support) frame attachment screw 2 (doubles as the strap pin)...

  • Page 6: Controls

    6 ● controls volume control battery compartment reverb switch power lamp aux in jack aux in level control cord hook line out jack dc-in jack (power adaptor connector) dc-in 9~12v + – bass control treble control phones on/off switch phones jack off 1 2 off on phones reverb v olume b ass treble nomenc...

  • Page 7: Attaching The Frame

    7 when shipped from the factory, the left frame is not attached to the silent guitar’s main body. Before using the instrument, please properly attach the left frame using the proce- dure described below. • after the frame is attached, make sure attachment screws 1 and 2 are tightened firmly. Using t...

  • Page 8: Tuning

    8 tuning use a tuning meter, pitch pipe, tuning fork, piano, etc., and tune the open strings to the pitches shown below. • if the string’s pitch is high, loosen the string until the string’s pitch is slightly lower than the tuning pitch, then tune while raising the string’s pitch. 1f 2f 3f 4f 5f 1. ...

  • Page 9: Changing Strings

    9 changing strings 1. Thread the string through the corresponding string hole on the bridge, then tie the string as shown in the illustration below. After tying the knot, pull both ends of the string to make the knot firm on the bridge. 2. Next, tie the strings to the pegs. Hold the guitar so the he...

  • Page 10: Power Supply

    10 power supply the silent guitar operates either on battery power or with an ac adaptor however, it will consume more power when the reverb function is in use. For that reason, we recommend that it be powered with the supplied ac power adaptor for normal use. Always turn the phones on/off switch of...

  • Page 11: Using The Controls

    11 using the controls ■ using the line out jack (using with a guitar amplifier or powered speaker, etc.) 1. Use a standard phone plug cable to connect the silent guitar’s line out jack to the input jack on the guitar amplifier or powered speaker, etc. When the cable’s plug is inserted into the line ...

  • Page 12: Connecting External Devices

    12 3 line out aux in phones dc-in line out aux in aux vol min max ac power adaptor : yamaha pa-1e or pa-3c or pa-d09 battery : 9v 6lr61 or 6f22 made in indonesia silent guitar model slg-100n n89 open line out aux in aux vol min max this device complies with part 15 of the fcc rules. Operation is sub...

  • Page 13

    13 ■ aux in jack • the aux in jack can be used to connect an external stereo signal source to the silent guitar. Connecting the audio output of a cd player, cassette player, etc. To the instrument allows you to play along with the external audio source. • the aux in jack’s signal level can be contro...

  • Page 14: Using The Soft Case

    14 when putting the silent guitar into the supplied soft case, remove the left frame from the silent guitar, and then place in the individual parts in the case as shown in the illustration below. • put the left frame into the case’s larger pocket. • put the power adaptor into the smaller pocket in t...

  • Page 15: Specifications

    15 specifications neck mahogany body maple fingerboard rosewood (slg-120nw : ebony) bridge rosewood frame unit maple (slg-120nw : rosewood/maple) strings nylon guitar strings sensors b-band connectors/controls • aux in • aux in level control • line out jack (monaural) • phones jack (stereo) • volume...

  • Page 16

    Wh98220 r0 printed in indonesia 07_slg100n_120nw_last.Pm65 06.7.26, 10:27 am 4.