Yamaha Silent Guitar SLG110S Owner's Manual

Other manuals for Silent Guitar SLG110S: User Manual
Manual is about: Owner's Manual

Summary of Silent Guitar SLG110S

  • Page 1

    1 thank you for purchasing the yamaha silent guitar. In order to obtain the maximum performance and enjoyment from your silent guitar, we urge you to read this owner’s manual thoroughly before using the instrument. Please keep this owner’s manual in a safe place for later reference. Contents precaut...

  • Page 2

    2 special.Message.Section 92-bp this product utilizes batteries or an external power supply (adaptor). Do not connect this product to any power supply or adaptor other than one described in the manual, on the name plate, or specifically recommended by yamaha. This product should be used only with th...

  • Page 3

    3 your.Silent.Guitar.Will.Give.You.Years.Of.Reliable.Service.If.You.Follow.The.Simple.Rules.Given.Below: information.For.Users.On.Collection.And.Disposal.Of.Old.Equipment.And.Used.Batteries these symbols on the products, packaging, and/or accompanying documents mean that used electrical and electron...

  • Page 4: Main Body/accessories

    4 main body/accessories after opening the packaging, please check that all the parts listed below are in- cluded. • main body • left frame • stereo earphones • soft case • ac adaptor pa-d012(a), pa-130(a), pa-d09 * product numbers may vary according to the region. Additionally, instruments sold in s...

  • Page 5: Nomenclature

    5 nomenclature ● .Front ● .Rear open line out aux in aux vol min max controls → see page 6. Neck frame attachment screw 1 (doubles as the strap pin) fingerboard saddle tuning peg nut finger rest left frame (removable) bridge right frame (fixed) horn (leg support) pickup (underneath the saddle) body ...

  • Page 6: .Controls

    6 ● .Controls volume control effect switch power lamp aux in jack aux in level control line out jack dc-in jack (power adaptor connector) bass control treble control phones on/off switch phones jack nomenclature cord hook off on phones vo lu m e b a ss tr eb le off rev1 rev2 echo ch o ru s ef fe c t...

  • Page 7: Attaching The Frame

    7 open line out aux in aux vol min max when shipped from the factory, the left frame is not attached to the silent guitar’s main body. Before using the instrument, please properly attach the left frame using the proce- dure described below. •. After.The.Frame.Is.Attached,.Make.Sure.Attachment.Screws...

  • Page 8: Power Supply

    8 power supply the silent guitar operates either on battery power or with an ac adaptor however, it will consume more power when the reverb function is in use. For that reason, we recommend that it be powered with the supplied ac power adaptor for normal use. Always turn the phones on/off switch off...

  • Page 9: Using The Soft Case

    9 when putting the silent guitar into the supplied soft case, remove the left frame from the silent guitar, and then place in the individual parts in the case as shown in the illustration below. •. Put.The.Left.Frame.Into.The.Case’s.Larger.Pocket. •. Put.The.Power.Adaptor.Into.The.Smaller.Pocket.In....

  • Page 10: Connecting External Devices

    10 line out aux in aux vol min max line out aux in phones dc-in open line out aux in aux vol min max connecting external devices silent guitar or power adaptor electric outlet •.Using.The.Cord.Hook wrap the power adaptor’s cord around the cord hook (prevents cord from being unplugged). Cord hook fro...

  • Page 11

    11 ■ . Aux.In.Jack • the aux in jack can be used to connect an external stereo signal source to the silent guitar. Connecting the audio output of a cd player, portable music player, etc., to the instrument allows you to play along with the external audio source. • the aux in jack’s signal level can ...

  • Page 12: Using The Controls

    12 when the power is on, the lamp lights. Adjusts high frequencies adjusts the volume selects the effect. Adjusts low frequencies using the controls ■ . Using.The.Line.Out.Jack. (using.With.A.Guitar.Amplifier.Or.Powered.Speaker,.Etc.) 1. Use a standard phone plug cable to connect the silent guitar’s...

  • Page 13

    13 ■ . Using.The.Stereo.Earphones. (or.Stereo.Output.To.An.External.Device) when using the instrument with the supplied stereo earphones or a separately purchased pair of headphones, or when you want to send the instrument’s stereo output to an external device, use the headphones (phones) jack for c...

  • Page 14: Specifications

    14 specifications neck mahogany body maple fingerboard rosewood bridge rosewood frame.Unit maple strings steel strings for acoustic guitar sensors lr-baggs connectors/controls • aux in • aux in level control • line out jack (monaural) • phones jack (stereo) • volume • bass control • treble control •...