Yamaha Synth Owner's Manual - page 8
Synth Arp & Drum Pad Owner’s Manual
8
6
-3 Scale window
Sets the scale of the Keyboard in the Keyboard display.
6
Tapping here closes the window.
The Keyboard indication differs depending on the selected Scale
type and root note.
Selects the root
note for the scale.
Selects the Scale
type.
Root
Scale
A
B
C
A:
When this is set to On, you can modify the sound by sliding your finger
vertically or vibrating your finger horizontally on the Keyboard.
When the SCALE type is Off, this function is not available.
B:
Indicates a parameter which can be controlled by sliding your finger vertically
on the Keyboard. Tapping the indicator calls up the parameter list and lets you
select the favorite one.
C:
Indicates a parameter which can be controlled by vibrating your finger
horizontally on the Keyboard. Tapping the indicator calls up the parameter list and
lets you select the favorite one.
7
TEMPO
To change the tempo, tap the Tempo value to call up the slider then operate the
slider, or tap [TAP] three times at the desired tempo.
Tapping [-]/[+] changes the value in single steps
8
ARP ON/OFF HOLD
When ARP ON/OFF is turned on, tapping the key will trigger Arpeggio playback.
When HOLD is turned on, the Arpeggio cycles even if you release your fingers
from the Keyboard (
1
).
9
VARIATION
Determines the playback variation of the Arpeggio.
)
VELOCITY MODE
When THRU is turned on, the Arpeggio plays back with your performance velocity.
When ORIGINAL is turned on, the Arpeggio plays back at the velocities included
in the Arpeggio sequence data.
!
OCTAVE RANGE
Determines the octave setting of Arpeggio playback.
@
BEAT STRETCH (%)
Determines the actual playback tempo by multiplying the current tempo by the
percentage value selected here. The “50%” setting doubles the tempo while the
“200%” setting halves the tempo.
#
SWING VALUE
Determines the type of note that serves as the basis for the Swing parameter:
1/32 (32nd note), 3/16 (16th note triplet), 1/16 (16th note), 3/8 (8th note triplet), 1/8
(8th note), 3/4 (1/4 note triplet), 1/4 (1/4 note)
$
Slider, GATE TIME/SWING
When “GATE TIME” is turned on, the Slider operation controls the gate time of
the Arpeggio notes. When “SWING” is turned on, the Slider operation adjusts
the timing of the even-numbered back-beat notes (according to the note type
specified in the SWING VALUE parameter) to produce a swing feel.
%
TRANSPOSE
Shifts the note in semitone steps.