Yamaha Tio1608-D Setup Manual

Other manuals for Tio1608-D: Owner's Manual
Manual is about: I/O RACK

Summary of Tio1608-D

  • Page 1

    Tf series with tio1608-d system setup guide 1st edition: june 2016.

  • Page 2: Table Of Contents

    Tf series & tio1608-d 2 www.Yamahaproaudio.Com this guide introduces the setup procedure for the yamaha tf series digital mixing console and tio1608-d i/o rack, as well as system examples based on the number of tio1608-d units. Although the tf series can be used by itself as an all-in-one console, t...

  • Page 3: Introduction

    Tf series & tio1608-d 3 www.Yamahaproaudio.Com introduction the systems explained in this guide use the "quick config" function found in the tf series. This function can facilitate the system setup by automatically patching the dante network between the tf series and tio1608-d. To build a more flexi...

  • Page 4: Setup Procedure

    Tf series & tio1608-d 4 www.Yamahaproaudio.Com setup procedure tf series settings to begin, enable the quick config and the ha control functions on the tf series. The quick config function can automatically patch the dante network between the tf series and tio1608-d. Enabling ha control will allow y...

  • Page 5

    Tf series & tio1608-d 5 www.Yamahaproaudio.Com synchronizing the tf series and tio1608-d the tf series and tio1608-d will automatically sync up about one minute after turning on the power switches, provided that the connections and settings have already been made. The synchronization status can be c...

  • Page 6: System Examples

    Tf series & tio1608-d 6 www.Yamahaproaudio.Com system examples here we will introduce some representative system examples when connecting the tf series digital mixer and the tio1608-d. The system examples shown in this guide can all be created by using the "quick config" function. As shown in the di...

  • Page 7

    Tf series & tio1608-d 7 www.Yamahaproaudio.Com the i/o patches for each tf series are shown below. With two tio1608-d racks two tio1608-d racks can be connected together to build a stagebox system with 32 ins/16 outs. For this system example, we recommend that you set the ids for the two tio1608-d r...

  • Page 8

    Tf series & tio1608-d 8 www.Yamahaproaudio.Com the tf series to slot. This will allow you to assign the input connectors from the tio1608-d to input ch 1–16. The i/o patches for each tf series are shown below. On the tf3 and tf5, take note that the input connectors 1-8 of the tf5 (or input connector...

  • Page 9

    Tf series & tio1608-d 9 www.Yamahaproaudio.Com freely patching by dante controller to build a more flexible system, you can manually patch the dante network between the tf series and tio1608-d by using the dante controller software instead of the quick config function. For example, if you want to ch...

  • Page 10

    Tf series & tio1608-d 10 www.Yamahaproaudio.Com the diagram below is an example of a stagebox system including two tio1608-d racks, which is patched by dante controller. To output the sub out channel to the subwoofers, turn the "with output" option off, and change the output patching. System example...