Z-Tec Lite SP series User Manual - page 6
Footrest
To remove the footrest, first lift up the footplate then activate the release lever (photo b).
Swing away the footrest to the side of the wheelchair. Carefully grip the footrest assembly
and lift straight up (photo c). Be very careful not to angle the footrest assembly as it may
catch the wheelchair frame and could damage the paintwork. You now can remove the foot-
rest assembly away from the wheelchair (photo d). To re-fit, follow the instructions above in
reverse order.
a
b
c
d
Warning!
Be very careful not to angle the footrest assembly as it may catch the wheelchair frame and
could damage the paintwork.
Footrest Adjustment
Leg rest Adjustment:
For optimum comfort it is important to attain the correct leg position (1.). The footrests have
been designed so that they can be extended by releasing the fixing screw (2.) on the back of
the footrest hanger. This lengthens the leg rests and once a comfortable position is found the
fixing should be secured tightly before use. A toolkit is provided.
( 1.)
( 2.)