1. DL manuals
  2. Z-Tec
  3. Wheelchair
  4. ZT-600-710-SP16
  5. User Manual

Z-Tec ZT-600-710-SP16 User Manual

Summary of ZT-600-710-SP16

  • Page 1

    Deluxe folding aluminium zt-600-710 wheelchair user manual please ensure that this manual is read and understood before using the wheelchair z-tec mobility unit 1b albion works, moor street, brierley hill, west midlands dy5 3sz available models: zt-600-710-sp16 (self-propelled with 41cm seat width) ...

  • Page 2

    Introduction these wheelchairs have been designed for persons with limited or no personal mobility for transport only. This user’s manual is compiled from the latest specifications and product infor- mation available at the time of publication. We reserve the right to make changes as they become nec...

  • Page 3

    Safety tips regular checks before use please check the following before each use: • quick release axles on the rear wheels • tyres and brakes. Brakes will not function properly if the tyres are worn or damaged, or if the gap between the tyre and brake is too big. • the maximum user weight is 120kg. ...

  • Page 4

    Handling opening and folding opening 1. Rest both hands on each of the seat upholstery support rails and press down until the seat and back upholsteries become tight. (see photo 1) 2. Make sure that the seat support rails are safely located in the sup- port cups. Warning! Do not place your fingers b...

  • Page 5

    Assembly • to assemble to fit the footrests place the top pin into the wheel- chair frame. Turn the footrest assembly towards the centre of the chair and push down to secure. Leg rest 1 leg rest 2 • to remove pull the release lever to release the footrest assem- bly and either swing the assembly inw...

  • Page 6

    Brakes parking brake the brakes are preset and adjustment should only be necessary if the brakes be- come loose or no longer function correctly. To apply the parking brake push the brake lever towards the front of the wheelchair. Push the lever back to release the brakes. See photos below. These lev...

  • Page 7

    Warnings do not stand or put pressure on the footrests when entering or exiting the wheelchair. Should any defects become apparent on your wheelchair or if the brakes do not respond as well as expected cease using the wheelchair immediately and return it to your z-tec mobility dealer for inspection....