Z-Tec ZT-900-900 User manual - page 4
Handling
Opening and Folding
Opening
1.
Rest both hands on each of the seat upholstery support rails and press down
until the seat and back upholsteries become tight. See photo 2
2.
Make sure that the seat support rails are safely located in the support cups.
Warning!
Do not place your fingers between the seat
upholstery and the seat tubes when opening or folding the frame.
Folding
1.
Lift up the footplates
2.
Grasp the centre of the seat upholstery from the back and front and lift the seat
upwards. This will cause the chair to fold up by its own weight. See photo 1
Photo 1
Seat Support Rails
Photo 2
Folding Backrest
1.
Press the release lever on each
side of the wheelchair back.
2.
When released fold down for
easier storage,
3.
Make sure the locking mecha-
nism is fully engaged before sit-
ting in wheelchair.
Half Folding Backrest
Seat & Back UPH Tensioning
1.
Adjustment can be made by
releasing the Velcro straps as
shown in photo 3, then adjust
to suit.
2.
Fasten the Velcro straps
when adjusted and before
use.
Back UPH Removal
Seat Cushion Removal