Product name: ct101 document title: ct101 operation guide document type code: iboe part number: 1111-002-002 28dec11 edits mtf 22nov11 initial rel mtf 5jan12 dg edits add fcc/ic page blank page remove before binding note: append this operation ib to the install ib to make one ib-booklet. Need a divi...
Pg 1 operation guide ct100 the ct100 communicating z-wave3 thermostat operates via a high- quality, easy-to-use touch screen. To set or adjust your ct100, simply touch your finger firmly to the screen. The screen will automatically light up and you will hear a “beep.” do not use a sharp or metallic ...
Pg 2 control screens home screen before you operate the ct100 please get familiar with these basic control screens. All the ct100 functions are accessed through these screens: home, menu, program and manual. The ct100 touch screen technology allows you to select (by touching) an item and change it u...
Pg 2 pg 3 menu screen the menu screen is the gateway to many functions or settings of the ct100. It is displayed when you press the menu button. [see page 10 for details] set day touch this area to set the day of the week. Set time touch this area to set the time of day. Left arrow goes back, right ...
Pg 4 manual screen the manual screen control screen is where you can make temporary changes to your ct100’s operation. From the full home screen, touch the main temperature display to use this screen. [see page 13 for details] y y g f hold emer holiday heat target temperature room temperature return...
Pg 4 pg 5 initial settings press menu to to access the following commands (from home screen). Set day of the week touch the day of the week area to cycle through the days of the week to select the current day. Set time of day touch the time of day arrows to move the time selection forward or backwar...
Pg 6 menu screen functions press menu to bring up menu screen. Time of day touch the left (down) or right (up) arrows next to the time display to set the current time (1 minute per touch). Touch and hold the arrow for fast time set (15 minute jumps). Day of week touch day area to select present day....
Pg 6 pg 7 chirp set - touch this to turn the audible chirp sound on or off. F c set - touch this to switch the temperature display scale from of to oc . Filter - air filter alert - the ct100 can be programmed to remind you when the hvac sytem’s air filter needs changing. Touch filter. The display wi...
Pg 8 for full lock : touch the (1 bar) icon again for 5 seconds to go to full lock. No changes can be made in full lock (2 bars). Once locked, the ct100 will respond just to menu. To unlock , press menu. Touch and hold icon for 5 seconds for 2 bars (if not there already). Then touch and hold the ico...
Pg 8 pg 9 touch to return to the home screen. Diff (used for 2 stage normal or heat pump with auxiliary only, not on screen for single stage) the differential is the number of degrees between the room temperature and the target temperature at which the 2nd stage will be used. Default is 2°f. Touch m...
Pg 10 hold this will hold the target temperature you set indefinitely, until you turn hold off. Hold will allow you to operate your thermostat as a manual thermostat. It will keep whatever temperature you set until you change it or cancel hold. Take care using the hold function as the program is now...
Pg 10 pg 11 other functions save energy button the “save energy” feature on the ct100 provides a simple, easy-to-use way to help you manage your energy use. Save energy automatically adjusts your target temperature up in cool or down in heat by 4 o f. To use save energy, press the save energy button...
Pg 12 simple screen this display mode limits the amount of information on screen and limits the functions to just the +/- arrows and the menu button. Hold down the program button for 12 seconds to access the limited display screen. Hold down the program button for 12 seconds to leave the limited dis...
Pg 12 pg 13 communicating thermostat the ct100 has a built in z-wave radio. This allows your thermostat to communicate with other systems. To connect to a network - to remove from a network - 1] press add devices on your z-wave controller. The controller will go into discover devices mode. 2] press ...
Pg 14 fcc regulatory information: note: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This e...
Pg 14 pg 15.
Pg 16.
Pg 16 pg 17.
