Z-Wave ZSE40 User Manual

Summary of ZSE40

  • Page 1

    User manual z-wave 4-in-1 sensor motion / light / temperature / humidity z-wave certified device zp3111us-5 specifications model number: zse40 z-wave signal frequency: 908.42 mhz power: 2 aaa batteries range: up to 100 feet line of sight operating temperature: 5° - 104° f installation and use: indoo...

  • Page 2

    Command_class_association_v2 command_class_battery command_class_configuration command_class_device_reset_locally command_class_firmware_update_md_v2 command_class_manufacturer_specific_v2 command_class_notification_v4 command_class_powerlevel command_class_security command_class_sensor_multilevel_v...

  • Page 3

    - bring the 4-in-1 sensor closer to your z-wave controller - press and release the z-wave button quickly several times once you put the controller in the inclusion mode to ensure the command has gone through - put your controller in the exclusion mode and press and release the z-wave button, then tr...

  • Page 4

    Depending on your z-wave gateway's home automation software capabilities, you may be able to associate your z-wave 4-in-1 sensor in groups with other z-wave devices to schedule scenes and create events. Zooz 4-in-1 sensor supports group 1 with up to five devices for lifeline communication. To associ...

  • Page 5

    Default set to mode 3. Note: mode 2 will increase activity and affect battery life. Tamper switch tamper switch is activated whenever sensor’s cover is removed while the device is powered up. It will send an alarm notification as scheduled. Mounting wait! This sensor may only be used and installed i...

  • Page 6

    Warranty this limited warranty applies to physical goods, and only for physical goods, purchased from zooz (the "physical goods"). What does this limited warranty cover? This limited warranty covers any defects in material or workmanship under normal use according to instructions from the user manua...

  • Page 7

    Fcc note the manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. Store indoors when not in use. Suitable for dry locations only. Do not immerse in water. ...