Z-World Wolf BL2600 User Manual - page 44
Manual is about: C-Programmable Single-Board Computer with Ethernet
of
106
40
Wolf (BL2600)
4.4 BL2600 Function APIs
4.4.1 Board Initialization
Call this function at the beginning of your program. This function initializes the system I/O ports and
loads all the A/D converter and D/A converter calibration constants from flash memory into SRAM for
use by your program.
The ports are initialized according to Table A-3 in Appendix A.
SEE ALSO
digOut, digIn, serMode, anaOut, anaIn, anaInDriver, anaOutDriver
void brdInit (void);