Zagg Flex Arc Wireless Instructions Manual - page 5

4

EXTENDING AND RETRACTING THE EARBUDS

Your Flex Arc’s earbuds extend and retract for a perfect fit every time or for easy 

storage. Here’s how to use and store them:

 1.  To extend the earbuds, grasp one earbud at a time and pull it slowly 

     straight out from its housing until it is your desired length. 

2.   To retract the earbuds, press and hold the Retract button for each earbud. 

     Note: The earbuds retract rapidly. To avoid potential injury either hold an 

     earbud and let it retract slowly, or avoid retracting the earbuds while the 

     Flex Arc is around your neck. 

CHARGING

When fully charged, your Flex Arc will deliver up to eight hours of audio 

enjoyment per charge. Charging it is easy; here’s how:

 1.  Connect the included micro USB cable to the port underneath the left 

     side of your Flex Arc.

2.  Connect the USB end of the cable to your preferred USB outlet. 

3.  The LED will light red while your Flex Arc is charging. The LED will turn 

     off when your Flex Arc is fully charged. 

4.  Remove the micro USB charging cable and enjoy your Flex Arc for up to 

     eight hours.

    1. Pair your Flex Arc as described in the Power and Pairing section 

      of this manual. 

   2. Press the Play button to begin playing your audio. Note: If your earbuds are 

       fully retracted, your audio will automatically play through the speakers. 

       If one or both earbuds are extended, your audio will play through the 

       earbuds. You can manually change the play mode by quick-pressing the 

       Power button. 

   3. While audio is playing, press the Play button to pause your audio. 

       Press the Play button while paused to resume playing.               

   4. Control your volume by quick-pressing the Volume Up and Volume Down buttons. 

   5. Press and hold the Volume Up button to track forward on your playlist. 

       Press and hold the Volume Down button to track back on your playlist.