Zagg ZAGGfolio Instruction Manual

To insert the iPad®, have keyboard on the 

left with iPad® home button facing you 

and slide the iPad® in and to the right. 

To remove the iPad®, pull the left side. 

To remove the keyboard pull to the right. 

To insert the keyboard, align and slide to 

the left. 

Place the iPad® into the central groove 

and lean back. When using keyboard by 

itself, iPad® can be used in both portrait 

and landscape mode.

When the iPad® is in the ZAGGfolio without 

the keyboard, align with keyboard side 

and lean back. 

1. On the keyboard, slide the power switch on. The status light         

illuminates for four seconds, and then it turns off. 

2. On the iPad® 2 select Settings > General > Bluetooth® > On.

Inserting/Removing the iPad® 2 and Keyboard

Positioning 

Powering on and pairing your keyboard

The Bluetooth® keyboard should only need to pair to your iPad® once 

as follows:

Press the Connect button on the keyboard to make it

discoverable. The status light flashes on keyboard and the 

iPad® displays “ZAGG Keyboard” as an available device.

Select “ZAGG Keyboard” on the iPad®. The iPad® will display 

a unique code. 

Type the code using the keyboard and press enter. The 

keyboard is now paired to the iPad®.

Lights and buttons

Battery

Flashes when the battery is low (approximately 20% charge and two 

to four days of use remaining)

Flashes when pairing

Lights briefly when you turn on the keyboard, and then turns off

The ZAGGfolio uses a long-life, rechargeable battery that gives you 

several weeks of normal use. The keyboard goes into sleep mode if 

it’s left on and not being used. Press any key and wait a second or 

two to bring the keyboard out of sleep mode.

The lithium-polymer battery in the keyboard has no memory effect 

and may be charged whenever you wish.

When not in use for a prolonged period, we recommend that you 

turn off the keyboard to lengthen the battery life. 

Charging light: 

Turns on when charging and turns off when fully charged

connect

status

Bluetooth® button

Charging light

Status light

3.

4.

5.

1.

2.

3.

Status light:

F

O

LD

INSIDE RIGHT

INSIDE LEFT