ZALMAN CNPS 5X User Manual

Summary of CNPS 5X

  • Page 1

    User’s manual cnps5x performa www.Zalman.Com ver.121113 to ensure safe and easy installation, please read the following precautions intel socket 1155 / 1156 / 775 cpus amd socket fm2/fm1/am3+/am3 / am2+ / am2 cpu&apus.

  • Page 2: .Com

    1 .Com 1. Precautions 2. Specifications model spec. Cnps 5x performa material pure copper and aluminum weight 320g dimensions 127(l) Ⅹ 64(w) Ⅹ 134(h)㎜ fan bearing-type fsb(fluid shield bearing) rpm 1,400 ~ 2,800rpm ± 10% noise level 20 ~ 32dba ± 15% input voltage 12v function pwm control, auto restar...

  • Page 3: .Com

    2 .Com 4. Installation requirements 3. Components 65㎜ 135㎜ 130㎜ user’s manual thermal grease backplate cooler thermal grease 1) space requirements 2) air guide removal the cooler’s installation requires an unobstructed space of 130㎜(width), 65㎜(length), and 135㎜(height), with the cpu as a central re...

  • Page 4: .Com

    3 .Com 1) intel socket 1155 / 1156 / 775 installation ① install the clip support to the motherboard according to the socket- type. (see diagram) 5. Installation 3) cooler orientation as shown in the diagram below, it is recommended that the cooler be installed so that air flows from the cooler toward...

  • Page 5: .Com

    4 .Com m/b ② align the clip support to the motherboard and fasten with the pushpins. ③ clear off any particles or residue from the cpu’s surface. Then spread a thorough layer of thermal grease on the cpu and the base of the cooler..

  • Page 6: .Com

    5 .Com ④ completely unfasten the 2 bolts already assembled on the clip and adjust the position to fit the intel socket. When reassembling the bolt, be sure to assemble only half way of the total length. ⑤ install the cooler on the clip support as shown in the picture and connect the lug slot of the c...

  • Page 7: .Com

    6 .Com 2) amd socket fm2 / fm1 / am3+ / am3 / am2+ / am2 installation ① clear off any particles or residue from the cpu’s surface. Then spread a thorough layer of thermal grease on the cpu and the base of the cooler. ② completely unfasten the 2 bolts already assembled on the clip and adjust the posi...

  • Page 8: .Com

    7 .Com ④ connect the cooler’s 4-pin connector to the motherboard’s cpu fan header. M/b the pwm fan’s operation will vary depending on the motherboard’s bios settings. Caution.