ZALMAN CNPS10X Extreme Sales Manual - Ultra Quiet Cpu Cooler
Ultra Quiet CPU Cooler
CNPS10X
Extreme
7 Q&A
7. Q&A
9 How can the fan be replaced if it breaks down?
Unscrew the 4 screws on the fan’s housing. Pull the lower end of the fan’s housing slightly forward, beyond the slightly
g
g
g y
,
y
g y
protruding guide, then gently pull the fan housing down. To install a functioning fan, follow the steps in reverse order. It may
be necessary to use a screw driver or pen to guide the fan’s power connector onto the 4-pin header on the cooler.
9 What is the thermal resistance?
9 What is the thermal resistance?
The CNPS10X Extreme’s thermal resistance is 0.118℃/W.
* Note: this thermal resistance value was obtained through tests performed on a ‘dummy heater’ and may be different on
different testing equipment and in different environments).
9 Wouldn’t the motherboard warp due to the weight of the cooler? If the motherboard warps, would that
cause any problems?
If the cooler is properly installed as indicated in the User’s Manual any warping of the motherboard caused by the tension
If the cooler is properly installed as indicated in the User s Manual, any warping of the motherboard caused by the tension
of the cooler’s clip will be within a safe range for stable operation.
9 Where can I find motherboard compatibility information?
Motherboard compatibility information can be found in Zalman’s website. In general, motherboards with the folllowing CPU
sockets are compatible.
Intel Socket 1156 / 1366 / 775
AMD So ket AM3 / AM2+ / AM2 / 754 / 939 / 940
ⓒ
2009 Zalman Tech Co., Ltd.
AMD Socket AM3 / AM2+ / AM2 / 754 / 939 / 940