User’s manual cnps10x flex www.Zalman.Com ver. 1.2 to ensure safe and easy installation, please read the following precautions. Intel socket 1155/1156/1366/775 cpu core i7 core i5 core i3 core 2 quad core 2 duo core 2 extreme dual core pentium pentium d pentium 4 celeron d amd socket am3/am2+/am2/75...
1 .Com english 1. Precautions 2. Specifications 1) this cooler must be used with a 120mm fan. 2) do not ingest the thermal grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or irritation persists, seek medical attention. 3) to prevent po...
2 .Com english 3. Components 1) common components thermal grease (zm-stg2) vibration pads fan fixing clips loading block side caps bolts nuts double-sided tape backplate user’s manual cooler ※ 120mm fan is not included and must be purchased separately. Amd a clip amd b clip intel clip 2) intel compo...
3 .Com english 4. Installation requirements 1) space requirements 2) air guide removal 3) cooler orientation the cooler’s installation requires unobstructed space with dimensions of 140mm(width), 140mm(length), 155mm(height), and the cpu as a central reference point. Please check if components such ...
4 .Com english 5. Installation 1) intel socket 1155 / 1156 / 775 and socket 1366 installation ② insert the nuts to the backplate according to the socket type and fix with the side caps. Socket 775 socket 1155/1156 socket 1136 please note the direction of the nuts and side caps. X o caution 1 2 ① unf...
5 .Com english x o caution please make note of the loading block’s direction. ③ - ⓑ socket 1155 / 1156 / 1366 attach the double-sided tape to the center of the backplate and remove the cover on the other side. ※ sockets 1155 / 1156 / 1366 do not use the loading block. ③ - ⓐ socket 775 remove the tap...
6 .Com english ④ align the backplate’s nuts to the motherboard clip support’s holes and attach the backplate to the backside of the motherboard. ⑤ spread about 1/3 of the included thermal grease on the cpu and the fasten the bolts to install the cooler. ⑥ attach the vibration pads to the cooler and ...
7 .Com english 2) amd socket am3 / am2+ / am2 installation x o ② insert the nuts to the backplate according to the socket type and fix with the side caps. 1 2 please note the direction of the nuts and side caps. Caution ① unfasten the bolts on the cooler’s base one thread, insert the amd a clip betw...
8 .Com english ④ remove the clip support attached to the motherboard. M/b m/b ③ remove the tape covering film from the loading block’s surface and attach to the backplate. Caution please make note of the loading block’s direction. Attach the double-sided tape to the installed loading block and remov...
9 .Com english ⑤ align the backplate’s nuts to the motherboard clip support’s holes and attach the backplate to the backside of the motherboard. ⑥ spread about 1/3 of the included thermal grease on the cpu and the fasten the bolts to install the cooler. ⑦ attach the vibration pads to the cooler and ...
10 .Com english 3) amd socket 754 / 939 / 940 installation ① spread about 1/3 of the included thermal grease on the cpu. ② center the cooler on top of the cpu and press down on the clip lever after fastening the amd b clip’s square end to the clip support lug slot. Square end lug slot ③ attach the v...
11 .Com english gs1000 / gs1000se • e-atx / standard atx / microatx compatible * supports intel dual xeon server motherboards • up to 6 hot swap hdd bays * gs1000(3 standard / 3 optional) * gs1000 se(optional) • tool-free hdd installation • airflow optimized design • vibration absorbing hdd dampers ...
