User’s manual cnps10x quiet www.Zalman.Com ver. 1.3 to ensure safe and easy installation, please read the following precautions. Intel socket 1155/1156/1366/775 cpu core i7 core i5 core i3 core 2 quad core 2 duo core 2 extreme dual core pentium pentium d pentium 4 celeron d amd socket am3/am2+/am2/7...
1 .Com 1. Precautions 2. Specifications 1) use and keep product away from reach of children and pets. 2) do not ingest the thermal grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or irritation persists, seek medical attention. 3) to pr...
2 .Com 3. Components 1) common components 4) amd socket am3/am2+/am2/754/939/940 components thermal grease (zm-stg2) double-sided tape washers fan mate 2 cable user’s manual fan mate 2 3) intel socket 1366 components socket 1366 clip socket 1366 clip support bolts (gold) cooler amd clip 2) intel soc...
3 .Com 4.Installationrequirements 1)spacerequirements 2) air guide removal thecooler’sinstallationrequiresunobstructedspacewithdimensionsof 140mm(width),140mm(length), 165mm(height), and the cpu as a central reference point. Please check if components such as odds and psu protrude intotherequiredspa...
4 .Com ① - c socket 1366 clip support installation socket 1366 clip support washer bolt (gold) m/b ② clear off any particles or residue from the cpu’s surface then spread (outwards from center) a thorough layer of thermal grease on the cpu and the base of the cooler. ① - b socket 1155/1156 clip supp...
5 .Com ③ remove the fan from the heatsink by unfastening the fan fixing clip. ④ insert the intel socket 1155/1156/775 or socket 1366 clip through the cooler’s heatpipes at an odd angle then center its orientation. Making sure that the cooler and the clip are centered, fasten the clip by tightening t...
6 .Com ※ refer to page 7 for fan mate 2 installation ※ refer to page 7 for fan mate 2 installation 2) amd socket am3/am2+/am2/754/939/940 installation ② place the cooler on the center of the cpu. Align and connect the clip’s lug slot with the lug of the motherboard’s retention frame. Press onto the ...
7 .Com 6. Fan mate 2 installation and usage 1) fan mate 2 installation 2) fan mate 2 usage ① connect the motherboard and fan cable to the fan mate 2 as shown in the diagram below. Rotating the fan speed control knob for rpm control. ② fan mate 2 can be installed to the side of the case using double-...
8 .Com.
