User's manual cnps11x series ver. 121106 to ensure safe and easy installation, please read the following precautions www.Zalman.Com intel socket 2011/1366/1156/1155/775 cpus amd socket fm2/fm1/am3+/am3/am2+/am2 cpu&apus.
2 .Com english english 1. Precautions 2. Specifications 1) avoid inserting objects or hands into the fan while it is in operation to prevent product damage and injuries. 2) do not ingest the thermal grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. ...
3 .Com english 3. Components 1) common components amd clip intel clip 2) intel components 3) amd components socket 2011/1366/1156/1155/775 socket fm2/fm1/am3+/am3/am2+/am2 11x extreme thermal grease [zm-stg2] 11x performa thermal grease [zm-stg2m] loading block nuts double-sided tape backplate 11x e...
4 .Com english english 4. Installation requirements cnps11x extreme cnps11x performa 1) space requirements 2) air guide removal 3) cooler orientation 100 mm 137 mm 155 mm the cooler’s installation requires an unobstructed space of 137mm(width), 100mm(length), and 155mm(height), with the cpu as a cen...
5 .Com english 5. Installation a. Intel socket installation 1) intel socket 2011 installation - unfasten the bolts on the cooler’s base one thread, insert the intel clip between the cover and the base, and then refasten the bolts. Make sure the intel clip’s ingresses are flush against the protrusion...
6 .Com english english socket 775 socket 1156/1155 socket 1366 take note of the orientation of the nuts and the side caps. X o caution 2) intel socket 1366/1156/1155/775 installation ① install bolts to the backplate according to the socket type and secure with side caps. 1 2 ② socket 1366/1156/1155 ...
7 .Com english ③ socket 775 installation remove the sticker cover from the lower tier of the loading block and attach to the backplate. Attach double-sided tape to the loading block and remove the double-sided tape cover. Double-sided tape loading block x o caution please make note of the orientatio...
8 .Com english english please make sure that pwm control mode is activated in the motherboard’s bios settings. Caution ④ align the backplate’s nuts with the motherboard’s clip support installation holes and then fasten to the motherboard. M/b ⑥ connect the cooler’s 4-pin connector to the motherboard...
9 .Com english 1) amd socket fm2/fm1/am3+/am3/am2+/am2 installation ① unfasten the bolts on the cooler’s base one thread, insert the amd clip between the cover and the base, and then refasten the bolts. Make sure the amd clip’s ingresses are flush against the protrusions of the base cover. Caution a...
10 .Com english english x o take note of the orientation of the nuts and the side caps. Caution ③ remove the sticker cover from the lower tier of the loading block and attach to the backplate. Caution please make note of the orientation of the loading block’s installation. Attach double-sided tape t...
11 .Com english ④ disassemble the motherboard’s clip support. ⑤ align the backplate’s nuts with the motherboard’s clip support’s installation holes and fasten to the motherboard. M/b m/b m/b silver bolt b (3mm) ⑥ apply a suitable amount of the included thermal grease on the cpu’s surface and then fa...
12 .Com english english ⑦ connect the cooler’s 4-pin connector to the motherboard’s cpu fan header. Please make sure that pwm control mode is activated in the motherboard’s bios settings. Caution tip [cnps11x extreme only] for quiet mode, please connect rc24p to the fan connector. Rc24p (fan rpm res...
