User's manual cnps12x ver.160309 to ensure safe and easy installation, please read the following precautions. Www.Zalman.Com amd socket fm2 / fm1 / am3+ / am3 / am2+ / am2 cpu&apus intel socket 2011 v3 / 2011 / 1366 / 1156 / 1155 / 1151 / 1150 / 775 cpus.
1 www.Zalman.Com 1. Precautions 2. Specifications 1) avoid inserting objects or hands into the fan while it is in operation to prevent product damage and injuries. 2) do not ingest the thermal grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ing...
2 www.Zalman.Com 3. Components thermal grease [zm-stg2] loading block nuts & side caps nipple a nipple b nuts double-sided tape backplate clip support resistor [rc5] bolts intel washer (black film) amd washer (black rubber) wrench user’s manual clip cooler.
3 www.Zalman.Com 4. Installation requirements 1) space requirements 2) air guide removal 3) cooler orientation 132 mm 151 mm 154 mm the cooler’s installation requires an unobstructed space of 151mm(width), 154mm(length), and 132mm(height), with the cpu as a central reference point. Please check if c...
4 www.Zalman.Com 5. Installation a. Clip support installation according to the socket types ※ chose the appropriate installation method on the pages depending on a user’s socket type, and then install clip support. 1) intel socket 2011 v3 / 2011 installation ① fasten nipple b to the clip support’s h...
5 www.Zalman.Com 2) intel socket 1366 / 1156 / 1155 /1151 / 1150 installation ① install bolts to the backplate according to the socket type and secure with side caps. ② attach double-sided tape to the center of the backplate and remove the double-sided tape’s cover. ※ socket 1366/1156/1155/1151/1150...
6 www.Zalman.Com 3) intel socket 775 installation ① install bolts to the backplate according to the socket type and secure with side caps. ② remove the sticker cover from the lower tier of the loading block and attach it to the backplate. ③ attach double-sided tape to the loading block and remove th...
7 www.Zalman.Com ④ align the backplate’s nuts with motherboard’s clip support holes, attach it to the back side of the motherboard, and then fix it with intel’s washer and nipple a. ⑤ install the clip support on the motherboard using nuts. Nipple a intel washer (black film) nut clip support please m...
8 www.Zalman.Com 4) amd socket fm2 / fm1 / am3+ / am3 / am2+ / am2 installation ① install bolts to the backplate according to the socket type and secure with side caps. ② remove the sticker cover from the lower tier of the loading block and attach to the backplate. ③ attach dobule-sided tape to the ...
9 www.Zalman.Com ④ take away the fixed clip support from the motherboard, and then install the included clip support using nipple a, amd’s black rubber washer and nuts. Nipple a amd washer (black rubber) nut clip support please make a note of the orientation of the clip support. Caution o x.
10 www.Zalman.Com b. Cooler installation ( intel / amd socket ) ※ after installation of the clip support depending on a user’s socket type, install cooler according to the direction below. ① apply a suitable amount of the included thermal grease on the cpu’s surface. ② insert clip into the hole of h...
